Search results

This systematic review paper aims to investigate seasonal ambient change’s impact on the incidence of falls among older adults.

The population, exposure, outcome (PEO) structured framework was used to frame the research question prior to using the Preferred Reporting Items for Systematic Reviews and Meta-Analysis framework. Three databases were searched, and a total of 12 studies were found for inclusion, and quality appraisal was carried out. Data extraction was performed, and narrative analysis was carried out.

Of the 12 studies, 2 found no link between seasonality and fall incidence. One study found fall rates increased during warmer months, and 9 of the 12 studies found that winter months and their associated seasonal changes led to an increase in the incidence in falls. The overall result was that cooler temperatures typically seen during winter months carried an increased risk of falling for older adults.

Additional research is needed, most likely examining the climate one lives in. However, the findings are relevant and can be used to inform health-care providers and older adults of the increased risk of falling during the winter.

With proper design and work planning, falls through fragile skylights are preventable. Skylights pose a hazard to workers when their work tasks for operations, maintenance and repair require them to be on roofs. The National Institute of Occupational Health and Safety produced guidelines and special alerts to address the dangers that are present around skylights, and the Occupational Safety and Health Administration regulations have prescriptive requirements for work performed around skylights, and yet incidents still occur. The purpose of this study is to investigate and raise awareness for the causality of the incidents involving skylights in the USA.

The authors investigated and analyzed 204 incidents involving skylights recorded by the Bureau of Labor Statistics to characterize their nature and to determine any correlation with the roof environment or the nature of the work performed. Using Google Earth and Google Maps roof geometry, proximity of skylights to roof edge and rooftop mechanical equipment was determined.

The majority of falls through skylights occur during roof maintenance and repair activities. Falls through skylights are underreported. Because of a general lack of good design to reduce or eliminate the risk of falling through skylights, facility managers carry the burden to properly assess work and access on roofs where fragile skylights are present.

The phenomenon of falling through skylights was made aware on a national level in the USA in 1989; however, little has been done from a design and planning perspective to reduce these incidents. This paper presents a unique perspective on the role of facility managers in understanding the hazards associated with roof maintenance near skylights.

The concept of aging-in-place has gained notable significance in the last decade due to a dramatic demographic shift in global population dynamics that have considerably affected the ability of societies to adequately cater for their aging population. This paper examines some of the barriers to aging-in-place in the context of health needs, housing design and the role of retrofitting/smart home technologies in overcoming these barriers.

Using a narrative literature review approach, the authors undertook a comprehensive search of recent relevant literature focusing on five core thematic areas: health and aging, aging in place, barriers to aging in place, retrofitting and smart home technologies for successful aging in place. The authors entered appropriate keywords into interdisciplinary research databases and synthesized a coherent narrative discussing the thematic areas using the data extracted from the literature search.

There is a bidirectional relationship between aging and the home environment. Barriers to aging-in-place are mainly related to progressive decline in health, which alters the environmental needs of individuals. Appropriate building designs can significantly facilitate aging-in-place. The authors, therefore, highlight the role of retrofitting and smart home technologies as practical solutions to the challenges of the aging-in-place.

Forward planning in building design is essential to guarantee that the home environment is well adapted for the challenges of aging-in-place while also promoting healthy aging.

The paper shows the relationship between aging and the home environment and how building design considerations could enhance healthy aging-in-place.

Robotics and automation are successful in construction, health and safety, but costs and expertise hinder their use in developing nations. This study examined mobile apps as a more accessible and affordable alternative.

This descriptive study explored the use of mobile apps in construction, health and safety management. It used a literature review to identify their availability, accessibility, and capabilities. The study consisted of four five stages: searching for relevant apps, selecting them based on versatility, examining their specific functions, removing untested apps and discussing their functions based on empirical studies.

A comprehensive literature review identified 35 mobile apps that are relevant to health and safety management during construction. After rigorous analysis, eight apps were selected for further study based on their relevance, user friendliness and compliance with safety standards. These apps collectively serve 28 distinct functions, including first-aid training and administration, safety compliance and danger awareness, safety education and training, hazard detection and warnings.

This study suggests that mobile apps can provide a cost-effective and readily accessible alternative to robotics and automation in health and safety management in construction. Further research is needed to accurately assess the efficacy of these apps in real-world conditions.

This study explored the use of apps in health and safety management, highlighting their diverse capabilities and providing a framework for project managers, contractors and safety officers to select suitable apps.

Construction safety is a crucial aspect that has far-reaching impacts on economic development. But safety monitoring is often reliant on labor-based observations, which can be prone to errors and result in numerous fatalities annually. This study aims to address this issue by proposing a cloud-building information modeling (BIM)-based framework to provide real-time safety monitoring on construction sites to enhance safety practices and reduce fatalities.

This system integrates an automated safety tracking mobile app to detect hazardous locations on construction sites, a cloud-based BIM system for visualization of worker tracking on a virtual construction site and a Web interface to visualize and monitor site safety.

The study’s results indicate that implementing a comprehensive automated safety monitoring approach is feasible and suitable for general indoor construction site environments. Furthermore, the assessment of an advanced safety monitoring system has been successfully implemented, indicating its potential effectiveness in enhancing safety practices in construction sites.

By using this system, the construction industry can prevent accidents and fatalities, promote the adoption of new technologies and methods with minimal effort and cost and improve safety outcomes and productivity. This system can reduce workers’ compensation claims, insurance costs and legal penalties, benefiting all stakeholders involved.

To the best of the authors’ knowledge, this study represents the first attempt in Bangladesh to develop a mobile app-based technological solution aimed at reforming construction safety culture by using BIM technology. This has the potential to change the construction sector’s attitude toward accepting new technologies and cultures through its convenient choice of equipment.

Fall accidents can cause casualties and economic losses in the construction industry. Fall portents, such as loss of balance (LOB) and sudden sways, can result in fatal, nonfatal or attempted fall accidents. All of them are worthy of studying to take measures to prevent future accidents. Detecting fall portents can proactively and comprehensively help managers assess the risk to workers as well as in the construction environment and further prevent fall accidents.

This study focused on the postures of workers and aimed to directly detect fall portents using a computer vision (CV)-based noncontact approach. Firstly, a joint coordinate matrix generated from a three-dimensional pose estimation model is employed, and then the matrix is preprocessed by principal component analysis, K-means and pre-experiments. Finally, a modified fusion K-nearest neighbor-based machine learning model is built to fuse information from the x, y and z axes and output the worker's pose status into three stages.

The proposed model can output the worker's pose status into three stages (steady–unsteady–fallen) and provide corresponding confidence probabilities for each category. Experiments conducted to evaluate the approach show that the model accuracy reaches 85.02% with threshold-based postprocessing. The proposed fall-portent detection approach can extract the fall risk of workers in the both pre- and post-event phases based on noncontact approach.

First, three-dimensional (3D) pose estimation needs sufficient information, which means it may not perform well when applied in complicated environments or when the shooting distance is extremely large. Second, solely focusing on fall-related factors may not be comprehensive enough. Future studies can incorporate the results of this research as an indicator into the risk assessment system to achieve a more comprehensive and accurate evaluation of worker and site risk.

The proposed machine learning model determines whether the worker is in a status of steady, unsteady or fallen using a CV-based approach. From the perspective of construction management, when detecting fall-related actions on construction sites, the noncontact approach based on CV has irreplaceable advantages of no interruption to workers and low cost. It can make use of the surveillance cameras on construction sites to recognize both preceding events and happened accidents. The detection of fall portents can help worker risk assessment and safety management.

Existing studies using sensor-based approaches are high-cost and invasive for construction workers, and others using CV-based approaches either oversimplify by binary classification of the non-entire fall process or indirectly achieve fall-portent detection. Instead, this study aims to detect fall portents directly by worker's posture and divide the entire fall process into three stages using a CV-based noncontact approach. It can help managers carry out more comprehensive risk assessment and develop preventive measures.

Extended reality (XR) is an emerging technology, with its popularity rising in different industry sectors, where its application has been recently considered in construction safety. This study aims to investigate the applications of XR technologies in the safety of construction through projects lifecycle perspective.

Scientometric analysis was conducted to discover trends, keywords, contribution of countries and publication outlets in the literature. The content analysis was applied to categorize previous studies into three groups concerning the phase of lifecycle in which they used XR.

Results of the content analysis showed that the application of XR in the construction safety is mostly covered in two areas, namely, safety training and risk management. It was found that virtual reality was the most used XR tool with most of its application dedicated to safety training in the design phase. The amount of research on the application of augmented reality and mixed reality in safety training, and risk management in all phases of lifecycle is still insignificant. Finally, this study proposed three main areas for using the XR technologies regarding the safety issues in future research, namely, control of safety regulations and safety coordination in construction phase, and safety reports in the operation phase.

This paper inspected the utilization of all types of XR for safety in each phase of construction lifecycle and proposed future directions for research by addressing the safety challenges in each phase.

The ageing and disabled population is fast growing, which emphasises the need to effectively modify current homes and environments to support healthy ageing and increasingly diverse health needs. This paper aims to bring together findings and analyses from three adaptations-focussed projects, drawing on perspectives from key stakeholders alongside the lived experiences of service users acquiring adaptations.

Following an Adaptations Framework developed from interviews and focus groups with older people and key stakeholders, the paper discusses barriers experienced by older people and front-line workers in receiving and delivering adaptations through all stages of the process.

This paper reveals how experiences around adaptations might diverge with unseen, hidden investment and need amongst individuals, and how conceptual and cost-focussed evidence gaps impact wider understandings of adaptations delivery. In so doing, this paper highlights how the adaptations process is perceived as a “fight” that does not work smoothly for either those delivering or receiving adaptations services.

The paper suggests a systematic failure such that the adaptations process needs to be rehauled, reset and prioritised within social and public policy if the housing, health and social care sectors are to support healthy ageing and prepare for the future ageing population.

The paper brings together insights from key stakeholders alongside service users' experiences of adaptations to highlight key policy drivers and barriers to accessing and delivering adaptations.

The lack of a proper register to store, match and display information on the adapted property has led to a waste of resources and prolonged delays in matching the disabled and elderly people with appropriate properties. This paper presents the development of a Housing Adaptations Register with user-matching functionalities for different mobility categories. The developed system accurately captures and documents adapted home information to facilitate the automated matching of disabled/aged applicants needing an adapted home with suitable property using banding, mobility and suitability index.

A theoretical review was conducted to identify parameters and develop adaptations register construct. A survey questionnaire approach to rate the 111 parameters in the register as either moderate, desirable or essential before system development and application. The system development relied on DSS modelling to support data-driven decision-making based on the decision table method to represent property information for implementing the decision process. The system is validated through a workshop, four brainstorming sessions and three focus group exercises.

Development of a choice-based system that enables the housing officers or the Housing Adaptations Register coordinators to know the level of adaptation to properties and match properties quickly with the applicants based on their mobility status. The merits of the automated system include the development of a register to capture in real-time adapted home information to facilitate the automated matching of disabled/aged applicants. A “choice-based” system that can map and suggest a property that can easily be adapted and upgraded from one mobility band to the other.

The development of a housing adaptation register helps social housing landlords to have a real-time register to match, map and upgrade properties for the most vulnerable people in our society. It saves time and money for the housing associations and the local authorities through stable tenancy for adapted homes. Potentially, it will promote the independence of aged and disabled people and can reduce their dependence on social and healthcare services.

This system provides the local authorities with objective and practical tools that may be used to assess, score, prioritise and select qualified people for appropriate accommodation based on their needs and mobility status. It will provide a record of properties adapted with their features and ensure that matching and eligibility decisions are consistent and uniform.

The Healthy at Home (H@H) is an older adult day program that is in Toronto in Ontario, Canada. This is an integrated health and social care (IHSC) program that seeks to address the social isolation and health needs of a highly vulnerable older adult population living in the north Toronto communities. These are Russian-speaking Jewish older adult immigrants. The case provides a detailed description of the factors that enabled a diverse group of health and social care organizations to integrate their respective services to address the health and social care needs of their clients using a culturally appropriate and trauma-informed lens.

A case description comprised of key informant interviews, and a focus group was undertaken of representatives from health and social care organizations serving clients in the north Toronto area.

This case description identified eleven integration factors that enabled organizations to provide integrated care using a culturally appropriate and trauma-informed lens, and they include developing an aligned vision and goals, communications, an inter-organization culture of inter-dependence, champions, pre-existing relationships, and champions. In addition, operating in the not-for-profit sector, sector differences, enabling public policies and a strong sense of community have influenced integration of services across the organizational partners to serve its high-risk client group.

This case description lends insights into how IHSC can be leveraged to provide culturally appropriate and trauma-informed care for highly vulnerable client/patient populations. A lesson learnt is that social care partners can engage in successful integration leadership in joint health and social care integration efforts.