Search results

The purpose of this paper is to analyze the scientific collaboration of institutions and its impact on institutional research performance in terms of productivity and quality. The researchers examined the local and international collaborations that have a great impact on institutional performance.

Collaboration dependence measure was used to investigate the impact of an institution on external information. Based on this information, the authors used “index of gain in impact through collaboration” to find the impact of collaborated publications in institutional research performance. Bibliographic data between 1996 and 2010 retrieved from Scopus were used to conduct current study. The authors carried out the case study of top institutes of Pakistan in terms of publication count to elaborate the difference between high performing institutions and those who gain disproportionally in terms of perceived quality of their output because of local or international collaboration.

The results showed that the collaboration of developing countries institutes on international level had a great impact on institutional performance and they gain more benefit than local collaboration. Altogether, the scientific collaboration has a positive impact on institutional performance as measured by the cumulative source normalized impact per paper of their publications. The findings could also help researchers to find out appropriate collaboration partners.

This study has revealed some salient characteristics of collaboration in academic research. It becomes apparent that collaboration intensity is not uniform, but in general, the average quality of scientific production is the variable that most often correlates positively with the collaboration intensity of universities.

Fraud has never respected national boundaries. But the advent of the Internet and modern technology has increased the ease with which money and documents can be transferred worldwide. The Fraud Advisory Panel's first annual report estimates that fraud could be costing £5bn a year and is likely to get worse following the introduction of the Euro and the growth in e‐commerce. When fraud is unearthed, there are three key elements to frustrating the fraudster and recovering the monies, namely speed, secrecy and surprise.

The purpose of this paper is to examine the sensitivity of the Kuwait housing market to major local and regional geo-political and economic events.

This paper examines the market dynamics of the housing market in Kuwait. Kuwait provides an interesting market to consider owing to its position as a major oil producer, its sensitivity to geo-political events and its unusual demographic characteristics.

The error-correction model highlights that market is relatively volatile, with evidence of mean-reverting behaviour. Only when the data is smoothed are their more consistent findings with respect to underlying fundamentals. This paper also examines the response of the market to seven regional and local events. Of particular interest is that the one event that results in a consistent significant response is domestic legislation directly concerned with housing. This has a far greater impact than local or regional geo-political events.

Very few papers have considered how economic and political shocks directly impact housing markets using an event study approach. Given its geographic location and also its economic dependence on oil, Kuwait is an interesting market to consider.

Seasonal influenza epidemics accounted for significant morbidity and mortality loads worldwide despite the availability of a safe vaccine as an efficient tool against severity of the disease. However, the uptake of the latter was sub-optimal. This study aims to identify predictors and barriers related to seasonal influenza vaccine uptake in the Kingdom of Bahrain.

A cross-sectional study enrolled 502 individuals attending primary healthcare centers in Bahrain for ambulatory care between July and August 2022. The data were collected using an interviews-based questionnaire which included questions on demographic data, knowledge and attitudes and practices toward influenza vaccine. The authors identified the barriers as well as the determinants of the vaccine uptake and its recommendation to others.

The mean age of participants was 35.07 years (SD = 13.9). Most of the respondents were Bahraini (86.5%) and 53.4 % were females. The results revealed that 34.1% have previous information about the influenza vaccine and 36.9% versus 69.9% are willing to receive the vaccine or advice it to others, respectively. Determinants of vaccine uptake were identified.

This study confirmed a sub-optimal influenza vaccine acceptance in the general community of Bahrain despite a global access in primary care. Health professionals need to be more proactive in mobilizing the community and particularly females toward influenza vaccination.

The purpose of this paper is to make a contribution to understanding the influence of factors such as the water/cement (W/C) ratio and the granular class on the mechanical and physical properties of high-strength concretes (HSCs). In the formulations of HSC, aggregates by their high mass and volume proportion play an important role. When selecting aggregates, it is necessary to know their intrinsic properties. These properties influence the performance of concrete, in particular the quality of the granulate cimentary adhesion.

This experimental study focused on the effect of W/C ratio (0.25, 0.30, 0.35), the effect of replacing a part of cement by silica fume (SF) (8%), the effect of fraction of aggregate on properties of fresh and hardened concrete, the effect of different environment conversation like drinking water and sea water on compressive strength and the study of absorption of water and softening using the mix design method of the University of Sherbrooke combined with the Dreux-Gorisse method which gives good results.

At the end of our work, the examination of the results obtained made it possible to establish the correlations between the formulations studied and the physicomechanical characteristics of the concrete compositions (HSC25, HSC16, HSC8). The results of this study show that the use of three granular classifications (DMAX8, DMAX16 and DMAX25) and three report W/C (0.25, 0.30 and 0.35) in two different conservation environment (drinking water and sea water) give HSCs, HSC25 with an W/C = 0.25 ratio has reached the largest mechanical strength of 90 MPa for different environments of conservation. For selecting aggregates, it is necessary to know their intrinsic properties, these properties influence the strength of concrete. In general, there is a slight decrease in the compressive resistance of the specimens stored in seawater, it can be said that the conservation life has not had effect on the resistance (28 days). The effect of aggressive environment can appear in the long term.

Mixed design and concrete fabrication with a 28-day compressive strength of up to 68 MPa or more of 90 MPa can now be possible used in Jiel (Algeria), and it should no longer be considered to be used only in an experimental domain. Addition of SF in concrete showed good development of strength between 7 and 28 days, depending on the design of the mix.

Concrete containing 8% SF with W/B of 0.25 has higher compressive strength than the other concretes, and concretes with SF are more resistant than concretes without SF, so it is possible to have concrete with a compressive strength of 82 MPa for W/C 0.25 without SF. Like as a result, we can avoid the use of SF to affect the strength of concrete at compressive strength of 68 MPa, and a slump of 21 cm, because the SF is the most expensive ingredient used in the composition of concrete and is therefore very important economically. One of the main factors of production of HSC above 90 MPa is use of aggregate DMAX25, which is stronger with W/B of 0.25 and 0.30.

This mixtures leads to a very dense microstructure and low porosity and produces increased permeability of HSC and is able to resist the penetration of aggressive agents. This combination has a positive effect on the economy of concrete.

The combination of the Dreux-Gorisse method with the Sherbrook method is very beneficial for determining the percentage of aggregates used, and the use of coarse aggregates of Jijel to obtain HSC with 90 MPa and 16 cm of workability.

By looking at a selection of iconic modern projects designed by or commissioned to the prominent but not well-examined architect Sami Abdul Baki both in Lebanon and Kuwait during his most productive years in the 50s, this paper attempts to identify first main trends, influences and ideologies that shaped these works at the peak of modern architectural development in the region. Through these examples, the paper then aims at retracing predominant trajectories of intellectual capital exchange and transfer of knowledge between Lebanon and Kuwait. These can go far beyond their territorial boundaries, without claiming a single grand-narrative that describes the modern architectural development in any of the two countries.

The data collected from discourse analysis, interviews and biographical notes were mapped into a schematic diagram illustrating a complex network of connections and multidisciplinary involvement in projects.

However, the outcome did not generate a dominant theme for the projects or expertise of the architect.

It is very likely that Sami Abdul Baki's strong political dimension and quality as a mediator or facilitator in addition to his strong network of contacts played a significant role in the project commissions that he has won as an architect/engineer in Kuwait, Lebanon, Germany and other countries.