Search results
1 – 10 of 21Vanchinathan Kumarasamy, Valluvan KarumanchettyThottam Ramasamy and Gnanavel Chinnaraj
The puspose of this paper, a novel systematic design of fractional order proportional integral derivative (FOPID) controller-based speed control of sensorless brushless DC (BLDC…
Abstract
Purpose
The puspose of this paper, a novel systematic design of fractional order proportional integral derivative (FOPID) controller-based speed control of sensorless brushless DC (BLDC) motor using multi-objective enhanced genetic algorithm (EGA). This scheme provides an excellent dynamic and static response, low computational burden, the robust speed control.
Design/methodology/approach
The EGA is a meta-heuristic-inspired algorithm for solving non-linearity problems such as sudden load disturbances, modeling errors, power fluctuations, poor stability, the maximum time of transient processes, static and dynamic errors. The conventional genetic algorithm (CGA) and modified genetic algorithm (MGA) are not very effective in solving the above-mentioned problems. Hence, a multi-objective EGA optimized FOPID (EGA-FOPID) controller is proposed for speed control of sensorless BLDC motor under various conditions such as constant load conditions, varying load conditions, varying set speed (Ns) conditions, integrated conditions and controller parameters uncertainty.
Findings
This systematic design of the multi-objective EGA-FOPID controller is implemented in MATLAB 2020a with Simulink models for optimal speed control of the BLDC motor. The overall performance of the EGA-FOPID controller is observed and evaluated for computational burden, time integral performance indexes, transient and steady-state characteristics. The hardware experiment results confirm that the proposed EGA-FOPID controller can precisely change the BLDC motor speed is desired range with minimal effort.
Research limitations/implications
The conventional real time issues such as nonlinearity characteristics, poor controllability and stability.
Practical implications
It is clearly evident that out of these three intelligent controllers, the EGA optimized FOPID controller gives enhanced performance by minimizing the time domain parameters, performance Indices error and convergence time. Also, the hardware experimental setup and the results of the proposed EGA-FOPID controller are presented.
Originality/value
It shows the effectiveness of the proposed controllers is completely verified by comparing the above three intelligent optimization algorithms. It is clearly evident that out of these three intelligent controllers, the EGA optimized FOPID controller gives enhanced performance by minimizing the time domain parameters, performance Indices error and convergence time. Also, the hardware experimental setup and the results of the proposed EGA-FOPID controller are presented.
Details
Keywords
Jailsingh Bhookya and Ravi Kumar Jatoth
This paper aims to get the optimal controller parameters of fractional order proportional integral derivative (FOPID)/proportional integral derivative (PID) i.e. Kp, Ki, Kd, λ and…
Abstract
Purpose
This paper aims to get the optimal controller parameters of fractional order proportional integral derivative (FOPID)/proportional integral derivative (PID) i.e. Kp, Ki, Kd, λ and µ for designing controller in automatic voltage regulator (AVR) system.
Design/methodology/approach
A novel method is proposed to get the optimal controller parameters for designing controller in AVR system using improved Jaya algorithm (IJA). The time domain objective and regular integral error objectives are used to design the controller to estimate the performance of the AVR system based on optimal tuning FOPID/PID controller.
Findings
The proposed method captures time domain objective of the FOPID/PID controller design and demonstrates effective transient response and better control action. The efficient tuning of FOPID controller results in high superiority of control efforts.
Practical implications
The simulations of IJA-based FOPID/PID controller design method are performed in MatLab tool and compared with several methods in the recent state of the art and the same are observed to be robust for the AVR system.
Originality/value
The developed optimal FOPID/PID controller tuning using IJA optimization method is totally a new approach for the AVR system in the literature.
Details
Keywords
The purpose of this paper is to improve transient response and dynamic performance of automatic voltage regulator (AVR).
Abstract
Purpose
The purpose of this paper is to improve transient response and dynamic performance of automatic voltage regulator (AVR).
Design/methodology/approach
This paper proposes a novel fractional order proportional–integral–derivative plus derivative (PIλDµDµ2) controller called FOPIDD for AVR system. The FOPIDD controller has seven optimization parameters and the equilibrium optimizer algorithm is used for tuning of controller parameters. The utilized objective function is widely preferred in AVR systems and consists of transient response characteristics.
Findings
In this study, results of AVR system controlled by FOPIDD is compared with results of proportional–integral–derivative (PID), proportional–integral–derivative acceleration, PID plus second order derivative and fractional order PID controllers. FOPIDD outperforms compared controllers in terms of transient response criteria such as settling time, rise time and overshoot. Then, the frequency domain analysis is performed for the AVR system with FOPIDD controller, and the results are found satisfactory. In addition, robustness test is realized for evaluating performance of FOPIDD controller in perturbed system parameters. In robustness test, FOPIDD controller shows superior control performance.
Originality/value
The FOPIDD controller is introduced for the first time to improve the control performance of the AVR system. The proposed FOPIDD controller has shown superior performance on AVR systems because of having seven optimization parameters and being fractional order based.
Details
Keywords
Hasan Saribas and Sinem Kahvecioglu
This study aims to compare the performance of the conventional and fractional order proportional-integral-derivative (PID and FOPID) controllers tuned with a particle swarm…
Abstract
Purpose
This study aims to compare the performance of the conventional and fractional order proportional-integral-derivative (PID and FOPID) controllers tuned with a particle swarm optimization (PSO) and genetic algorithm (GA) for quadrotor control.
Design/methodology/approach
In this study, the gains of the controllers were tuned using PSO and GA, which are included in the heuristic optimization methods. The tuning processes of the controller’s gains were formulated as optimization problems. While generating the objective functions (cost functions), four different decision criteria were considered separately: integrated summation error (ISE), integrated absolute error, integrated time absolute error and integrated time summation error (ITSE).
Findings
According to the simulation results and comparison tables that were created, FOPID controllers tuned with PSO performed better performances than PID controllers. In addition, the ITSE criterion returned better results in control of all axes except for altitude control when compared to the other cost functions. In the control of altitude with the PID controller, the ISE criterion showed better performance.
Originality/value
While a conventional PID controller has three parameters (Kp, Ki, Kd) that need to be tuned, FOPID controllers have two additional parameters (µ). The inclusion of these two extra parameters means more flexibility in the controller design but much more complexity for parameter tuning. This study reveals the potential and effectiveness of PSO and GA in tuning the controller despite the increased number of parameters and complexity.
Details
Keywords
This paper aims to suggest the parameter identification of load frequency controller in power system.
Abstract
Purpose
This paper aims to suggest the parameter identification of load frequency controller in power system.
Design/methodology/approach
The suggested control approach is established using fuzzy logic to design a fractional order load frequency controller. A new suitable control law is developed using fuzzy logic, and based on this developed control law, the unknown parameters of the fractional order proportional integral derivative (FOPID) controller are derived using an optimization technique, which is being used by minimizing the integral square error. In addition, to confirm the effectiveness of the proposed control design approach, numerous simulation tests were carried out on an actual single-area power system.
Findings
The obtained results reveal the superiority of the suggested controller as compared to the recently developed controllers with regard to time response specifications and quantifiable indicators. Additionally, the potential of the suggested controller is also observed by improving the load disturbance rejections under plant parametric uncertainty.
Originality/value
To the best of the authors’ knowledge, the work is not published anywhere else.
Details
Keywords
Zafer Bingul and Oguzhan Karahan
The purpose of this paper is to address a fractional order fuzzy PID (FOFPID) control approach for solving the problem of enhancing high precision tracking performance and…
Abstract
Purpose
The purpose of this paper is to address a fractional order fuzzy PID (FOFPID) control approach for solving the problem of enhancing high precision tracking performance and robustness against to different reference trajectories of a 6-DOF Stewart Platform (SP) in joint space.
Design/methodology/approach
For the optimal design of the proposed control approach, tuning of the controller parameters including membership functions and input-output scaling factors along with the fractional order rate of error and fractional order integral of control signal is tuned with off-line by using particle swarm optimization (PSO) algorithm. For achieving this off-line optimization in the simulation environment, very accurate dynamic model of SP which has more complicated dynamical characteristics is required. Therefore, the coupling dynamic model of multi-rigid-body system is developed by Lagrange-Euler approach. For completeness, the mathematical model of the actuators is established and integrated with the dynamic model of SP mechanical system to state electromechanical coupling dynamic model. To study the validness of the proposed FOFPID controller, using this accurate dynamic model of the SP, other published control approaches such as the PID control, FOPID control and fuzzy PID control are also optimized with PSO in simulation environment. To compare trajectory tracking performance and effectiveness of the tuned controllers, the real time validation trajectory tracking experiments are conducted using the experimental setup of the SP by applying the optimum parameters of the controllers. The credibility of the results obtained with the controllers tuned in simulation environment is examined using statistical analysis.
Findings
The experimental results clearly demonstrate that the proposed optimal FOFPID controller can improve the control performance and reduce reference trajectory tracking errors of the SP. Also, the proposed PSO optimized FOFPID control strategy outperforms other control schemes in terms of the different difficulty levels of the given trajectories.
Originality/value
To the best of the authors’ knowledge, such a motion controller incorporating the fractional order approach to the fuzzy is first time applied in trajectory tracking control of SP.
Details
Keywords
Nandha Gopal J. and Muthuselvan N.B.
The purpose of this paper is to enhance the response of quadratic boost converter inverter system (QBCIS) and also investigate proportional integral (PI) and fractional order…
Abstract
Purpose
The purpose of this paper is to enhance the response of quadratic boost converter inverter system (QBCIS) and also investigate proportional integral (PI) and fractional order proportional integral derivative (FOPID)-based space vector modulation inverter (SVMI) systems.
Design/methodology/approach
This paper presents modern expansion in control methods and power electronics have created wind-based AC to AC converters that relays to AC drives. The process includes the flow of quadratic boost converter (QBC) and SVMI locate their technique in associating permanent magnet synchronous generator and three phase load. This effort conveys with digital simulation using MATLAB/Simulink and hardware implementation of current mode wind-based QBCIS.
Findings
The direct current (DC) output from the rectifier is boosted using Quadratic Boost Converter (QBC). The DC yield of QBC is provided to the SVMI. The alternating current (AC) yield voltage is attained by using three-phase filter. The investigations are done with PI and FOPID-based SVMI systems. Current mode FOPID control is proposed to improve the time response of QBCIS system.
Originality/value
The simulation results are compared with the hardware results of QBCIS. The results of the comparison of PI with FOPID controlled by converters are made to show the improvement in terms of settling time and steady-state error.
Details
Keywords
Waheed Ur Rehman, Xinhua Wang, Yingchun Chen, Xiaogao Yang, Zia Ullah, Yiqi Cheng and Marya Kanwal
The purpose of this paper is to improve static/dynamic characteristics of active-controlled hydrostatic journal bearing by using fractional order control techniques and optimizing…
Abstract
Purpose
The purpose of this paper is to improve static/dynamic characteristics of active-controlled hydrostatic journal bearing by using fractional order control techniques and optimizing algorithms.
Design/methodology/approach
Active lubrication has ability to overcome the unpredictable harsh environmental conditions which often lead to failure of capillary controlled traditional hydrostatic journal bearing. The research develops a mathematical model for a servo feedback-controlled hydrostatic journal bearing and dynamics of model is analyzed with different control techniques. The fractional-order PID control system is tuned by using particle swarm optimization and Nelder mead optimization techniques with the help of using multi-objective performance criteria.
Findings
The results of the current research are compared with previously published theoretical and experimental results. The proposed servo-controlled active bearing system is studied under a number of different dynamic situations and constraints of variable spindle speed, external load, temperature changes (viscosity) and variable bearing clearance (oil film thickness). The simulation results show that the proposed system has better performance in terms of controllability, faster response, stability, high stiffness and strong resistance.
Originality/value
This paper develops an accurate mathematical model for servo-controlled hydrostatic bearing with fractional order controller. The results are in excellent agreement with previously published literature.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2020-0272
Details
Keywords
Himanshukumar R. Patel and Vipul A. Shah
The two-tank level control system is one of the real-world's second-order system (SOS) widely used as the process control in industries. It is normally operated under the…
Abstract
Purpose
The two-tank level control system is one of the real-world's second-order system (SOS) widely used as the process control in industries. It is normally operated under the Proportional integral and derivative (PID) feedback control loop. The conventional PID controller performance degrades significantly in the existence of modeling uncertainty, faults and process disturbances. To overcome these limitations, the paper suggests an interval type-2 fuzzy logic based Tilt-Integral-Derivative Controller (IT2TID) which is modified structure of PID controller.
Design/methodology/approach
In this paper, an optimization IT2TID controller design for the conical, noninteracting level control system is presented. Regarding to modern optimization context, the flower pollination algorithm (FPA), among the most coherent population-based metaheuristic optimization techniques is applied to search for the appropriate IT2FTID's and IT2FPID's parameters. The proposed FPA-based IT2FTID/IT2FPID design framework is considered as the constrained optimization problem. System responses obtained by the IT2FTID controller designed by the FPA will be differentiated with those acquired by the IT2FPID controller also designed by the FPA.
Findings
As the results, it was found that the IT2FTID can provide the very satisfactory tracking and regulating responses of the conical two-tank noninteracting level control system superior as compared to IT2FPID significantly under the actuator and system component faults. Additionally, statistical Z-test carried out for both the controllers and an effectiveness of the proposed IT2FTID controller is proven as compared to IT2FPID and existing passive fault tolerant controller in recent literature.
Originality/value
Application of new metaheuristic algorithm to optimize interval type-2 fractional order TID controller for nonlinear level control system with two type of faults. Also, proposed method will compare with other method and statistical analysis will be presented.
Details
Keywords
The purpose of this manuscript, a state feedback gain depends on the optimal design of fractional order PID controller to time-delay system is established. In established optimal…
Abstract
Purpose
The purpose of this manuscript, a state feedback gain depends on the optimal design of fractional order PID controller to time-delay system is established. In established optimal design known as advanced cuttlefish optimizer and random decision forest that is combined performance of random decision forest algorithm (RDFA) and advanced cuttlefish optimizer (ACFO).
Design/methodology/approach
The proposed ACFO uses the concept of crossover and mutation operator depend on position upgrading to enhance its search behavior, calculational speed as well as convergence profile at basic cuttlefish optimizer.
Findings
Fractional order proportional-integrator-derivative (FOPID) controller, apart from as tuning parameters (kp, ki and kd) it consists of two extra tuning parameters λ and µ. In established technology, the increase of FOPID controller is adjusted to reach needed responses that demonstrated using RDFA theory as well as RDF weight matrices is probable to the help of the ACFO method. The uniqueness of the established method is to decrease the failure of the FOPID controller at greater order time delay method with the help of controller maximize restrictions. The objective of the established method is selected to consider parameters set point as well as achieved parameters of time-delay system.
Originality/value
In the established technique used to evade large order delays as well as reliability restrictions such as small excesses, time resolution, as well as fixed condition defect. These methods is implemented at MATLAB/Simulink platform as well as outcomes compared to various existing methods such as Ziegler-Nichols fit, curve fit, Wang method, regression and invasive weed optimization and linear-quadratic regression method.
Details