Search results

It has been observed from the history of failed dies used in local extrusion industry that after certain press cycles, severe die damage occurs by using more number of in‐house recycled billets. The purpose of this paper is to focus on the effect of billet quality on the extrusion die service life, based on using microstructural and finite element analyses.

Numerical solution of stress distribution in extrusion die using microstructural and finite element analyses.

Simulation results demonstrate that extrusion die experiences high stresses and strains at critical locations by running secondary billets. Billet deformation behavior also shows that secondary billet has more resistance to flow during extrusion cycle, which results in such high stresses and strains in the die.

The study includes a particular die used to extrude the aluminum alloy billets. It may need to generalized including materials other than aluminum alloy.

The findings are original and believed to be useful for engineers working in the extrusion dies. Since it is shown that secondary billets (recycled billets) have more resistance to flow in the dye, a care should be taken when estimating the die life for the practical applications.

It is an original work. It deals with the comparison of new and recycled billets's performance in terms of stress formation in the die during the extrusion cycle.

This paper aims to understand the effect of extrusion conditions on the degree of foaming of polylactic acid (PLA) during three-dimensional (3D) printing. It was also targeted to optimize the slicing parameters for 3D printing and to study how the properties of printed parts are influenced by the extrusion conditions.

This study used a commercially available PLA filament that undergoes chemical foaming. An extrusion 3D printer was used to produce individual extrudates and print samples that were characterized using an optical microscope, scanning electron microscope and custom in-house apparatuses.

The degree of foaming of the extrudates was found to strongly depend on the extrusion temperature and the material feed speed. Higher temperatures significantly increased the number of nucleation sites for the blowing agent as well as the growth rate of micropores. Also, as the material feed speed increased, the micropores were allowed to grow bigger which resulted in higher degrees of foaming. It was also found that, as the degree of foaming increased, the porous parts printed with optimized slicing parameters were lightweight and thermally less conductive.

This study fills the gap in literature where it examines the foaming behavior of individual extrudates as they are extruded. By doing so, this work distinguishes the effect of extrusion conditions from the effect of slicing parameters on the foaming behavior which enhances the understanding of extrusion of chemically foamed PLA.

This study aims to investigate and model interrelationships between process parameters, geometrical profile characteristics and mechanical properties of industrially extruded aluminum alloys.

Statistical design of experiments (DOE) was applied to investigate and model the effects of eight factors including extrusion ratio, stem speed, billet-preheat temperature, number of die cavities, quenching media (water/air), time and temperature of artificial aging treatment and profile nominal thickness on four mechanical properties (yield strength, ultimate tensile strength, percent elongation and hardness). Experiments were carried out at an actual extrusion plant using 8-in. diameter billets on an extrusion press with 2,200 ton capacity.

Main factors and factor interactions controlling mechanical properties were identified and discussed qualitatively. Quantitative models with high prediction accuracy (in excess of 95%) were also obtained and discussed.

The obtained results are believed to be of great importance to researchers and industrial practitioners in the aluminum extrusion industry.

All practical and relevant parameters have been used to model all important mechanical properties in a collective manner in one study and within actual industrial setup. This is in contrast to all previous studies where either a partial set of parameters and/or mechanical properties are discussed and mostly under limited laboratory setup.

The paper aims to use the finite volume method widely used in computational fluid dynamics to avoid the serious remeshing and mesh distortion during aluminium profile extrusion processes simulation when using the finite element method. Block-structured grids are used to fit the complex domain of the extrusion. A finite volume method (FVM) model for aluminium extrusion numerical simulation using non-orthogonal structured grids was established.

The influences of the elements ' nonorthogonality on the governing equations discretization of the metal flow in aluminium extrusion processes were fully considered to ensure the simulation accuracy. Volume-of-fluid (VOF) scheme was used to catch the free surface of the unsteady flow. Rigid slip boundary condition was applied on non-orthogonal grids.

This paper involved a simulation of a typical aluminium extrusion process by the FVM scheme. By comparing the simulation by the FVM model established in this paper with the ones simulated by the finite element method (FEM) software Deform-3D and the corresponding experiments, the correctness and efficiency of the FVM model for aluminium alloy profile extrusion processes in this paper was proved.

This paper uses the FVM widely used in CFD to calculate the aluminium profile extrusion processes avoiding the remeshing and mesh distortion during aluminium profile extrusion processes simulation when using the finite element method. Block-structured grids with the advantage of simple data structure, small storage and high numerical efficiency are used to fit the complex domain of the extrusion.

The purpose of this paper is to find an efficient way by using finite volume method (FVM) to simulate the aluminum alloy profile extrusion processes.

By assuming isotropic conditions, the hot aluminum material is described as a non‐linear Newtonian fluid material. Semi‐implicit method for pressure‐linked equations algorithm is used to calculate the physical fields, and the dynamic viscosity is updated then. Volume of fluid method and moving grid method are also used for unsteady flow to catch the free surface of the material and the moving bound.

FVM model in this paper is an accurate and efficient method for the numerical simulation of aluminum profile extrusion processes. Compared with finite element method software, FVM model is both memory and CPU efficient.

Provide theoretical reference for sound extrusion process and die designs, which are the key factors to produce desirable products in industrial production.

The paper finds an efficient way to introduce the FVM in computational fluid dynamics field into the simulation of the steady and unsteady aluminum alloy profile extrusion processes. It provides a reference for people who are interested in FVM and extrusion processes.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.

This study aims to investigate rheological and extrusion behavior of thermosetting epoxy resins, which to find the universal property and printing parameters for extrusion-based rapid prototyping applications.

The thickener proportion greatly influences its viscosity and rheological behavior and therefore plays an important role in the shape of the cross-section of the extrudate.

A pseudoplastic (shear-thinning) is a basic requirement for obtaining extruded lines with plump cross-sections. In addition to the effects of the rheological behavior of the composite, shape maintenance and its wettability on the substrate, the cross-sectional geometry of the extrudate is also strongly affected by printing process parameters including the extrusion nozzle height, nozzle moving speed, extrusion rate and critical nozzle height. Proper combinations of these process parameters are necessary to obtain single-line extrudates with plump cross-sections and 3-D objects with dimensional accuracy, uniform wall thickness, good wall uprightness and no wall slumping. Formulas and procedures for determining these extrusion parameters are proposed and demonstrated in experiments.

The results obtained have been explained in terms of the interactions among the rheological properties of the composite, the shear rate imposed on the composite during extrusion, the wettability of the composite on the substrate and the shape maintenance of the composite during extrusion.

The purpose of this paper is to investigate the effects of parameters on the liquid phase migration (LPM) during the freeze-form extrusion fabrication (FEF) process.

To carry out this study, three factors were systematically investigated using orthogonal design of experiments. These three parameters are the extrusion velocity, the extrusion interval time and the extrusion head length. An orthogonal array with nine test units was selected for the experiments. Range analysis and analysis of variance were used to analyze the data obtained by the orthogonal experiments to identify the order of significant factors on LPM.

It was found that the LPM decreased with the increase of extrusion velocity and increased with the lengthening of extrusion interval time and the length of the extrusion nozzle. The order of significant factors for the LPM were found to be extrusion velocity > extrusion nozzle length > extrusion interval time.

Using an orthogonal design of experiments and a statistical analysis method, the liquid content of extrudate can be predicted and appropriate process parameter values can be selected. This leads to the minimization of LPM during the FEF process. Also, this analysis method could be used to study the LPM in other paste extrusion processes.

This paper suggests that the factors have significant impact on LPM during FEF process. The following analysis in this paper is useful for FEF users when prediction of LPM is needed. This methodology could be easily applied to different materials and initial conditions for optimization of other FEF-type processes. The research can also help to get better understanding of LPM during the FEF process.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming and powder metallurgy are briefly discussed. The range of applications of finite elements on the subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for the last five years, and more than 1100 references are listed.

This study aims to focus on the effect of interlayer bonding and thermal decomposition on the mechanical properties of fused filament fabrication-printed polylactic acid specimens at high extrusion temperatures.

A printing process, that is simultaneous manufacturing of contour and specimen, is used to improve the printing accuracy at high extrusion temperatures. The effects of the extrusion temperature on the mechanical properties of the interlayer and intra-layer are evaluated via tensile experiments. In addition, the microstructure evolution affected by the extrusion temperature is observed using scanning electron microscopy.

The results show that the extrusion temperature can effectively improve the interlayer bonding property; however, the mechanical properties of the specimen for extrusion temperatures higher than 270°C may worsen owing to the thermal decomposition of the polylactic acid (PLA) material. The optimum extrusion temperature of PLA material in the three-dimensional (3D) printing process is recommended to be 250–270°C.

A temperature-compensated constitutive model for 3D printed PLA material under different extrusion temperatures is proposed. The present work facilitates the prediction of the mechanical properties of specimens at an extrusion temperature for different printing temperatures and different layers.