Search results

The amount of food wasted every year is 1.3 billion metric tonne (MT), out of which 0.5 billion MT is contributed by the fruits processing industries. The waste includes by-products such as peels, pomace and seeds and is a good source of bioactive compounds like phenolic compounds, flavonoids, pectin lipids and dietary fibres. Hence, the purpose of the present study is to review the novel extraction techniques used for the extraction of the bio active compounds from food waste for the selection of suitable extraction method.

Novel extraction techniques such as ultrasound-assisted extraction, microwave-assisted extraction, enzyme-assisted extraction, supercritical fluid extraction, pulsed electric field extraction and pressurized liquid extraction have emerged to overcome the drawbacks and constraints of conventional extraction techniques. Hence, this study is focussed on novel extraction techniques, their limitations and optimization for the extraction of bioactive compounds from fruit and vegetable waste.

This study presents a comprehensive review on the novel extraction processes that have been adopted for the extraction of bioactive compounds from food waste. This paper also summarizes bioactive compounds' optimum extraction condition from various food waste using novel extraction techniques.

Food waste is rich in bioactive compounds, and its efficient extraction may add value to the food processing industries. Hence, compressive analysis is needed to overcome the problem associated with the extraction and selection of suitable extraction techniques.

Selection of a suitable extraction method will not only add value to food waste but also reduce waste dumping and the cost of bioactive compounds.

This paper presents the research progress on the extraction of bioactive active compounds from food waste using novel extraction techniques.

The extraction of bioactive compounds such as pigments from natural sources, using different solvents, is a vital downstream process. The present study aims to investigate the effect of different variables, namely, extraction temperature, mass of fermented rice and time on the extraction process of orevactaene and flavanoid pigment from Epicoccum nigrum fermented broken rice.

Central composite rotatable design under response surface methodology was used for deducing optimized conditions. The pigments were extracted under conditions of extraction temperature (40-70°C), mass of fermented rice (0.5-1.5 g) and time (30-90 min), using water as the extraction media. The experimental data obtained were studied by analysis of variance. Data were fitted to a second-order polynomial equation using multiple regression analysis.

The optimum conditions generated by the software for aqueous extraction process, i.e. extraction temperature of 55.7°C, 0.79 g of fermented matter and extraction time of 56.6 min, resulted in a pigment yield of 52.7AU/g orevactaene and 77.2 AU/g flavanoid.

The developed polynomial empirical model for the optimal recovery of the orevactaene and flavanoid pigments could be used for further studies in prediction of yield under specified variable conditions.

The response surface methodology helped in optimizng the conditions for the eco-friendly low-cost aqueous extarction process for orevactaene and flavanoid pigments, produced by Epicoccum nigrum during solid state fermentation of broken rice. This optimization can provide the basis for scaling up for industrial extraction process.

This paper focuses on optimizing the extraction conditions to get the maximum yield of orevactaene and flavanoid pigments, using water as the extracting media. No literature is available on the optimization of the extraction process of Epicoccum nigrum pigments, to the best of the authors’ knowledge.

The high content of unsaturated fatty acids and the elevated presence of bioactive compounds make pistachio oil a healthy product with great commercial potential. One of the primary constraints for its production is the lack of information regarding oil extraction from an industrial perspective. The purpose of this paper is to ensure the success of pistachio oil production at a commercial scale, attention should be paid to the effect of the main extraction procedures on the characteristics of oil, the consumer acceptance of these oils and their production cost.

Comparison and evaluation of the physicochemical and sensory characteristics and production cost of oil extracted using two different production lines (hydraulic press and screw press) are considered here.

Slight differences were found in the physicochemical analysis, but significant differences were identified in the sensory analysis. Consumer judges preferred the oil extracted with the hydraulic press. According to production costs, the break-even value that makes screw press extraction sustainable is €70.4 per litre, while for the hydraulic press it is €91.0 per litre, mainly due to a lower extraction yield and the longer extraction time required. As production costs of both methods are high, pistachio oil quality should prevail, making the use of the hydraulic press more advisable.

Although significant research has been conducted to analyse pistachio oil composition and nutritional value, little attention has been paid to differences that appear regarding consumer preferences and production costs depending on the production method used. This paper provides a comprehensive approach to high-quality pistachio oil production from an industrial perspective.

Modern thermal and non-thermal pretreatment techniques, namely, enzymatic treatment, gas phase plasma treatment and ohmic heating have become more pronounced over conventional techniques for enhanced coloured phytochemicals (pigments) extraction. Presently, numbers of pretreatment techniques are available with some unique feature. It is difficult to choose best pretreatment method to be employed for phytochemicals extraction from different sources. Therefore, this paper aims to discuss different modern pretreatment techniques for extraction with their potential results over conventional techniques.

Research and review articles targeting to the thermal and non-thermal pretreatment techniques were collected from Google Scholar. The required information has been tabulated and discussed which included qualities of modern pretreatment techniques over conventional techniques, phytochemical extraction and best pretreatment methods for optimized results.

Every pre-treatment has its own advantages and disadvantages for a particular phytochemical and its extraction from various sources. Enzymes can be used in combinations to enhance final yield like extraction of carotenoids (pectinase, cellulase and hemicellulase) from chillies and lycopene (pectinase and cellulase) from tomato. Utilization of each method depends upon many factors such as source of pigment, cost and energy consumption. CO₂ pretreatment gives good results for carotenoid extraction from algae sources. Ohmic heating can yield high anthocyanin content. Modifications in conventional blanching has reduced final waste and improvised the properties of pigment.

This study comprises collective information regarding modern pre-treatment for extraction over conventional pre-treatments. The study also covers future trends and certain new hybrid approaches which are still less flourished.

Almond oil is a gourmet product with functional food characteristics owing to its high almond oil content and high nutritional quality. One of the primary constraints on its production is the lack of information regarding oil extraction from an industrial perspective, including by-products generation.

The performance, quality and composition characteristics were analyzed, both from the physical-chemical and organoleptic point of view, of the almond oils obtained through two pressure systems: screw press (SP) and hydraulic press (HP). To ensure the success of almond oil production at a commercial scale, in this work, an economic study of the costs of the process was carried out as a complementary part of optimizing the production of virgin almond oil.

Physicochemical analysis showed little difference, just in total sterols (HP 2069, SP 2153) and some quality indexes (K232: HP 1.63, SP 2.13; peroxide index: HP 1.74, SP 0.95), in contrast to sensory analysis. Consumer judges valued roasted almond oil extracted using a HP the best. The production cost of the oil extracted with the SP was €23.05/l. With the HP it was €25.13/l, owing to the lower oil yield in the extraction. The most expensive treatment was for the HP with toasted almonds (€27.76/l), owing to the greater need for processing.

Production costs derived from the method used have received little attention. This paper presents data that allow for the transference between academic and industrial ambit and their economic viability.

This paper aims to prevent cotton textiles from fungi damage using eco-friendly aloe vera leaf extract, which was applied at a minimum amount, and cost-effective material.

Batch extraction method using methanol solvent; phytochemical analysis was investigated and three-level factorial design of experiment and analysis of variance (ANOVA) was used for the optimization of 27 test runs. The finish was applied by pad-dry-cue at distinct concentrations, and the chemical property after treatment was studied. Colorfastness and coordinates are analyzed. Cotton fabrics were cultured with Fusarium oxysporum fungi and the anti-fungal property was examined and reported according to AATCC 30–2004 standard.

The maximum yield of extract was at an optimum volume of 200 ml, 65 °C for 120 min. The effective antifungal fabric was achieved with minimum concentrations. There was significant strength loss in warp and weft direction. The treatment results in yellow-colored cotton fabric with fastness grade 3. The antifungal effect is durable until fifteen washes as the tensile strength losses were less than 1%.

The findings of this work were based on samples considered in the laboratory. However, it can be reproducible at the factory production scale the treatment has the potential of yielding yellow dyed cotton fabric with multifunctional finishing.

The treated fabric is against Fusarium oxysporum Fungi which is one of the vital antimicrobial properties of textile apparel products for various areas of application.

The natural extract material applied to a textile material is eco-friendly effective against microbes of cotton seeds during cultivation and apparel end-uses.

The work application of fungi resistance on cotton fabric using aloe vera active component was original; this work provides extraction of the active agent from aloe vera leaf, which is optimized statically and successfully applied for anti-fungal activity on cotton fabric.

The study aims to describe the main classes of antioxidants existing in fruit, beverages, vegetables and herbs and the different extraction and application of antioxidants in food. Oxidative degradation of lipids, especially induced by reactive oxygen species, leads to quality deterioration of foods and cosmetics and could have harmful effects on health. A major challenge is to develop tools to assess the antioxidant capacity and real efficacy of these molecules. Recently, many review papers regarding antioxidants from different sources and different extraction and quantification procedures have been published. However, none of them has all the information regarding antioxidants (sources, extraction and application in food).

This paper tries to take a different perspective on antioxidants for the new researcher involved in this field.

Antioxidants from fruit, vegetables and beverages play an important role in human health, for example, preventing cancer and cardiovascular diseases and lowering the incidence of different diseases. A number of plant products act as scavengers of free radical species and so have been classified as antioxidants. Antioxidants are an important group of food additives that have the ability to protect against detrimental change of oxidizable nutrients and consequently they extend shelf-life of foods.

Most of the antioxidants present in foods are phenolic and polyphenolic compounds, but their efficacy in food for the prevention of oxidation or in the body for dealing with oxidative stress and its consequences depends on different factors.

This study collected the last finding in the field of sources and applications of natural antioxidants.

The purpose of this paper is to evaluate the antioxidant activity and toxicity of Clinacanthus nutans leaves from three conventional extraction methods, i.e. maceration, Soxhlet and magnetic stirring.

Total flavonoid content (TFC) and phenolic content (TPC) were determined using colorimetric method of aluminum chloride and Folin-Ciocalteu (FC) assay, respectively. Antioxidant property of C. nutans was evaluated using 2,2'-diphenyl-1-pierylhydrazyl (DPPH) free radical scavenging assay. Cytotoxic activity of C. nutans against brine shrimp was evaluated based on LC50 (lethality concentration) after 24 h exposure to the plant extract.

The highest TPC of C. nutans was observed with Soxhlet extraction method (98.87 ± 10.43 mg of gallic acid equivalents (GAE/g) followed by maceration (68.77 ± 2.45 mg of GAE/g) and magnetic stirring (46.75 ± 2.45 mg of GAE/g). Interestingly, remarkable highest TFC was observed with magnetic stirring (568.90 ± 4.85 mg of rutin equivalent (RE)/g) followed by maceration (249.60 ± 2.79 mg of RE/g) and Soxhlet (174.8 ± 1.74 mg of RE/g). On the other hands, the extract obtained using maceration method showed the highest antioxidant activity (IC50: 14.18 mg/mL compared to ascorbic acid 144.36 µg/mL). Cytotoxicity of C. nutans from all extraction methods showed similar LC50 values with maceration (3.81 mg/mL), Soxhlet (2.61 mg/mL) and magnetic stirring (4.56 mg/mL), respectively.

Both phenolic and flavonoids are responsible for the antioxidant activity, of C. nutans extracts. Based on Meyer's toxicity index, all extracts were nontoxic (LC50>1 mg/mL).

The purpose of this study was to evaluate the extract of Moringa stenopetala seed oil, by organic solvents (methanol and hexane), for its efficacy against microbial activity on cotton fabrics. The selected microbes for the study were two types of bacteria which are Gram-positive (S. aureus) and Gram-negative (E. coli).

Two types of bacteria, Gram-positive (S. aureus) and Gram-negative (E. coli) were used. The extract was applied on fabrics at a concentration of 5, 10 and 15 g/L using the pad-dry-cure method and antibacterial activities verified by the bacterial-growth reduction method. The treated fabrics were evaluated for antimicrobial activity against the bacteria before and after 15 washing cycles. The extract was examined for molecular structural change using fourier transform infrared spectroscopy (FTIR) and physical properties of the fabric; tensile strength, elongation, air permeability, stiffness and wettability were evaluated.

Results showed treated fabrics reduces the growth of Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria from 77.6%–100% before wash and 45.8%–85.2% after wash for both extract concentrations. Comparing extracts, hexane extract reduces all bacteria growth than methanol extract for both extract concentrations while S. aureus was more susceptible to antimicrobial agents than E. coli at a lower concentration. As result, the tensile strength and air permeability were relatively lower than untreated ones without affecting the comfort properties of the fabric.

This study indicates that the Moringa stenopetala seed oil extract has a strong antimicrobial activity.

This study aims to investigate unripe carob pod as a source of antioxidant molecules useful in the eco-friendly synthesis of a gelatin conjugate. This one was involved in the preparation of gummies able to produce remarkable human health benefits.

Eco-friendly strategies (ultrasound-assisted extraction, low temperatures and eco-friendly solvents) were employed in the extraction of active molecules. Antioxidant molecules were involved in the grafting reaction with gelatin chains (ascorbic acid/hydrogen peroxide couple as initiator system). Gelatin conjugate represents a useful material able to prepare gummies with remarkable rheological and antioxidant performances over time.

Experimental results confirmed that the green approach allowed the achievement of extracts with remarkable antioxidant properties due to the presence of phenolic moieties. Gelatin conjugate synthesis preserved these functionalities, usefully exploited in the preparation of gummies with significant structural and biological features.

Compared to the literature data the preparation of the gummies with outstanding biological properties was performed by employing functional gelatin synthesized by an eco-friendly approach.