Search results

Because of the anisotropy of the process and the variability in the quality of printed parts, finite element analysis is not directly applicable to recycled materials manufactured using fused filament fabrication. The purpose of this study is to investigate the numerical-experimental mechanical behavior modeling of the recycled polymer, that is, recyclable polyethylene terephthalate (rPET), manufactured by a deposition FFF process under compressive stresses for new sustainable designs.

In all, 42 test specimens were manufactured and analyzed according to the ASTM D695-15 standards. Eight numerical analyzes were performed on a real design manufactured with rPET using Young's compression modulus from the experimental tests. Finally, eight additional experimental tests under uniaxial compression loads were performed on the real sustainable design for validating its mechanical behavior versus computational numerical tests.

As a result of the experimental tests, rPET behaves linearly until it reaches the elastic limit, along each manufacturing axis. The results of this study confirmed the design's structural safety by the load scenario and operating boundary conditions. Experimental and numerical results show a difference of 0.001–0.024 mm, allowing for the rPET to be configured as isotropic in numerical simulation software without having to modify its material modeling equations.

The results obtained are of great help to industry, designers and researchers because they validate the use of recycled rPET for the ecological production of real-sustainable products using MEX technology under compressive stress and its configuration for numerical simulations. Major design companies are now using recycled plastic materials in their high-end designs.

Validation results have been presented on test specimens and real items, comparing experimental material configuration values with numerical results. Specifically, to the best of the authors’ knowledge, no industrial or scientific work has been conducted with rPET subjected to uniaxial compression loads for characterizing experimentally and numerically the material using these results for validating a real case of a sustainable industrial product.

The purpose of this research is present an experimental and numerical study of the mechanical properties of the acrylonitrile butadiene styrene (ABS) in the additive manufacturing (AM) by fused filament fabrication (FFF). The characterization and mechanical models obtained are used to predict the elastic behavior of a prosthetic foot and the failure of a prosthetic knee manufactured with FFF.

Tension tests were carried out and the elastic modulus, yield stress and tensile strength were evaluated for different material directions. The material elastic constants were determined and the influence of infill density in the mechanical strength was evaluated. Yield surfaces and failure criteria were generated from the tests. Failures over prosthetic elements in tridimensional stresses were analyzed; the cases were evaluated via finite element method.

The experimental results show that the material is transversely isotropic. The elasticity modulus, yield stress and ultimate tensile strength vary linearly with the infill density. The stresses and the failure criteria were computed and compared with the experimental tests with good agreement.

This research can be applied to predict failures and improve reliability in FFF or fused deposition modeling (FDM) products for applications in high-performance industries such as aerospace, automotive and medical.

This research aims to promote its widespread adoption in the industrial and medical sectors by increasing reliability in products manufactured with AM based on the failure criterion.

Most of the models studied apply to plane stress situations and standardized specimens of printed material. However, the models applied in this study can be used for functional parts and three-dimensional stress, with accuracy in the range of that obtained by other researchers. The researchers also proposed a method for the mechanical study of fragile materials fabricated by processes of FFF and FDM.

This study attempts to evaluate the effect of the corpus-based inductive teaching approach with multiple academic corpora (PICA, CAEC and Oxford Corpus of Academic English) and conventional deductive teaching approach (i.e., multiple-choice items, filling the gap, matching and underlining) on learning academic collocations by Iranian advanced EFL learners (students learning English as a foreign language).

This is a quasi-experimental, quantitative and qualitative study.

The result showed the experimental group outperformed significantly compared with the control group. The experimental group also shared their perception of the advantages and disadvantages of the corpus-assisted language teaching approach.

Despite growing progress in language pedagogy, methodologies and language curriculum design, there are still many teachers who experience poor performance in their students' vocabulary, whether in comprehension or production. In Iran, for example, even though mandatory English education begins at the age of 13, which is junior and senior high school, students still have serious problems in language production and comprehension when they reach university levels.

The purpose of this paper is to discuss the current status of experimental research within hospitality and tourism. This paper further aims to develop practical ideas for enhancing the adoption of a cause and effect mindset in researchers.

A mini-review of the level of experimental designs and best-practice ideas published by the top 12 journals in hospitality and tourism over a five-year period was conducted.

Although the absolute number of experimental studies is growing, the ratio of experimental studies to overall publications remains low at 6.4%. To increase the take-up of experimental design, a broader typology of field experiments is presented. Practical steps to increase causal reality are provided under the categories of purpose; scenario development; scenario testing; and sample characteristics.

The methodological advances suggested in this paper can contribute to more robust theory development and testing. The recommendations offer guidance to a new generation of researchers seeking to add causal value to their studies, researchers collaborating with scholars from other discipline areas and hospitality managers seeking stronger evidence of cause and effect.

This paper identifies key obstacles to the take-up of experimental design and the contemporary status of experimental design. A novel typology of five experimental designs that distinguish the difference between experimental and correlational designs in terms of explanatory power is presented, together with a comprehensive list of best practice suggestions to increase causal reality in scenario design.

The present study aimed at developing and validating a self-development training package and determining self-development's effectiveness on job variables and human capital agility among secondary school principals in Isfahan.

In the first phase, the researcher conceived a full version of the self-development training package by studying the theoretical evidence of research and interviewing experts as well as using content analysis. The questionnaire was presented to several experts (n = 8) in that field of study for evaluation after compiling the initial version of the self-development training package, with the aim of determining the face and content validity. In the second phase of the study, the effectiveness of the self-development training package was experimented on secondary school principals using a quasi-experimental pre-test–post-test design and follow-up with a control group.

The evaluation results were suitable for the training package based on the proposed Lawshe method. The results also indicated that the implementation of a self-development training package in the experimental group had a significant effect on job performance and its dimensions, as well as human capital agility. The effect of the training package on increasing job performance in the post-test stage was 55.3% and was 50.2% in the follow-up stage. Also, the effect of this package on increasing the agility of human capital in the post-test phase was equal to 34.8% and was equal to 28.9% in the follow-up stage.

Question 1: What are the components of a self-development training package? Question 2: What is the credibility of the developed training package from the experts' point of view? Question 3: Does the self-development training package have an effect on job performance and its dimensions? Question 4: Does the self-development training package have an effect on human capital agility?.

The present work involves analytical and experimental investigation of sloshing in a two-dimensional rectangular tank including the effect of porous baffles to control and/or reduce the wave motion in the sloshing tank. The purpose of this study is to assess the analytical solutions of the drag coefficient effect on porous baffles performance to track free surface motion variation in the sloshing tank by comparison with experimental shake table tests under a range of sway excitation.

The linear second-order ordinary differential equations for liquid sloshing in the rectangular tank were solved using Newmark’s beta method and obtained the analytical solutions for liquid sloshing with dual vertical porous baffles of full submergence depths in a sway-oscillated rectangular tank following the methodology similar to Warnitchai and Pinkaew (1998) and Tait (2008).

The porous baffles significantly reduce wave elevation in the varying filled levels of the tank compared to the baffle-free tank under the range of excitation frequencies. It is observed that the Reynolds number-dependent drag coefficient for porous baffles in the tank can significantly reduce the sloshing elevations and is found to be effective to achieve higher damping compared to the porosity-dependent drag coefficient for porous baffles in the sloshing tank. The analytical model’s response to free surface elevation variations in the sloshing tank was compared with the experiment’s test results. The analytical results matched with shake table test results with a quantitative difference near the first resonant frequency.

The scope of the study is limited to porous baffles performance under range sway motion and three different filling levels in the tank. The porous baffle performance includes Reynolds number dependent drag coefficient to explore the damping effect in the sloshing tank.

The porous baffles with low-level porosities in the sloshing tank have many engineering applications where the first resonant mode of sloshing in the tank is more important. The porous baffle drag coefficient is an important parameter to study the baffle’s damping effect in sloshing tanks. Hence, obtained analytical solution for liquid sloshing in the rectangular tank with Reynolds number as well as porosity-dependent drag coefficient (model 1) and porosity-dependent drag coefficient porous baffles (model 2) performance is discussed. The model’s test results were validated using a series of shake table sloshing experiments for three fill levels in the tank with sway motion at various excitation frequencies covering the first four sloshing resonant modes.

Ensuring the early detection of structural issues in aircraft is crucial for preserving human lives. One effective approach involves identifying cracks in composite structures. This paper employs experimental modal analysis and a multi-variable Gaussian process regression method to detect and locate cracks in glass fiber composite beams.

The present study proposes Gaussian process regression model trained by the first three natural frequencies determined experimentally using a roving impact hammer method with crystal four-channel analyzer, uniaxial accelerometer and experimental modal analysis software. The first three natural frequencies of the cracked composite beams obtained from experimental modal analysis are used to train a multi-variable Gaussian process regression model for crack localization. Radial basis function is used as a kernel function, and hyperparameters are optimized using the negative log marginal likelihood function. Bayesian conditional probability likelihood function is used to estimate the mean and variance for crack localization in composite structures.

The efficiency of Gaussian process regression is improved in the present work with the normalization of input data. The fitted Gaussian process regression model validates with experimental modal analysis for crack localization in composite structures. The discrepancy between predicted and measured values is 1.8%, indicating strong agreement between the experimental modal analysis and Gaussian process regression methods. Compared to other recent methods in the literature, this approach significantly improves efficiency and reduces error from 18.4% to 1.8%. Gaussian process regression is an efficient machine learning algorithm for crack localization in composite structures.

The experimental modal analysis results are first utilized for crack localization in cracked composite structures. Additionally, the input data are normalized and employed in a machine learning algorithm, such as the multi-variable Gaussian process regression method, to efficiently determine the crack location in these structures.

The purpose of the research was to, first, investigate if the use of maps as instructional resources will boost scholarly performance and, second, examine if gender can moderate the effect of map usage on scholarly performance.

The study was a quasi-experimental pre-test and post-test. A sample of 260 JSS II Students from 8 schools were selected through the purposive sampling technique. A Social Studies Scholarly Performance Test (SSSPT) with a reliability index of 0.79 was the instrument for data collection. The students were assigned into two groups: control and experimental. Both groups were pre-tested taught for a timeline of six weeks and thereafter post-tested.

The study reported a significant increase in the scholarly performance of students taught with maps; a significant difference occurred in the scholarly performance of both groups and gender did not moderate the effect of maps.

The social studies teachers used for the study did not have previous knowledge or map skills; this could have affected the outcome. Secondly, the treatment took place for just six weeks, and the time allotted for social studies in the school timetable was used. This may not have given the students enough time to master map interpretation.

A major implication of the study is that results will show that maps can promote the scholarly performance of students in social studies. Secondly, the fact that gender did not moderate the effect of maps suggests that maps are gender-friendly.

The results of the study, if implemented, would make social studies teachers to become inventive and resourceful in the use of maps as instructional resources for junior secondary students' scholarly performance in social studies without taking gender into consideration.

This study is a product of the researcher’s doctoral thesis; therefore, it is original and has value. The results are the product of a painstaking study carried out by the author for a period of three years on the effect of instructional resources on social studies students’ scholarly performance. Maps were one of the instructional resources studied for the award of a Ph.D. degree.

This paper aims to investigate the experimental behavior and the reliability of concrete columns repaired using fiber-reinforced polymers (FRPs) under axial compression loading. The expression of the ultimate axial resistance was assessed from the experimental data of damaged concrete cylinders repaired by externally bonded double-FRP spiral strips.

The tested columns bearing capacity mainly depends of the elasticity modulus of both damaged and undamaged concrete have been considered in addition to the applied load and the cylinder diameter as random variables in the expression of the failure criterion. The reliability indicators were assessed using first order second moment method.

The emphasized test results, statistically fitted show that the strength has been retrofitted for all repaired specimens whatever the degree of initial damage. However, the gain in axial strength is inversely proportional to the degree of damage.

The efficiency of a new FRP repair procedure using double-spiral strips was studied. This research provides a technical and economical solution for retrofitting existing concrete columns. Finally, the random character of the variables that govern the studied system shows the accuracy and safety of the proposed original design.

This paper aims to solve the problems of large hard switching loss and unclear resonant parameter design in the existing inverter power supply topology.

This paper proposes a simple and reliable two-stage isolated inverter composed of series quasi-resonant push-pull and external freewheeling diode full-bridge inverter. The power supply topology is analyzed, the topology mode is analyzed, the mathematical model of the converter is established and the DC gain of the converter is deduced. The relationship between the load and the output gain of the resonant tank is presented, a new resonant parameter design method is proposed, and the parameter design of the resonant element of the converter is clarified.

The resonant components of the converter are designed according to the proposed resonant parameter design method, and the correctness of the method is verified by simulation and the development and testing of a 500 W experimental prototype. After experimental tests, the peak efficiency of the experimental prototype can reach 94%. Because the experimental prototype achieves soft switching, the heat generation of the switch is greatly reduced, so the heavy heat sink is removed, and the volume is reduced by about 30% compared with the traditional power supply, and the total harmonic distortion of the output voltage is about 2%.

The feasibility of the scheme is verified by experiments, which is of great significance for improving the efficiency of the inverter power supply and parameter optimization.