Search results

Pressure, being one of the key variables investigated in scientific and engineering research, requires critical and accurate measurement techniques. With the advancements in materials and machining technologies, there is a large leap in the measurement techniques including the development of micro electromechanical systems (MEMS) sensors. These sensors are one to two orders smaller in magnitude than traditional sensors and combine electrical and mechanical components that are fabricated using integrated circuit batch-processing technologies. MEMS are finding enormous applications in many industrial fields ranging from medical to automotive, communication to electronics, chemical to aviation and many more with a potential market of billions of dollars. MEMS pressure sensors are now widely used devices owing to their intrinsic properties of small size, light weight, low cost, ease of batch fabrication and integration with an electronic circuit. This paper aims to identify and analyze the common pressure sensing techniques and discuss their uses and advantages. As per our understanding, usage of MEMS pressure sensors in the aerospace industry is quite limited due to cost constraints and indirect measurement approaches owing to the inability to locate sensors in harsh environments. The purpose of this study is to summarize the published literature for application of MEMS pressure sensors in the said field. Five broad application areas have been investigated including: propulsion/turbomachinery applications, turbulent flow diagnosis, experimentalaerodynamics, micro-flow control and unmanned aerial vehicle (UAV)/micro aerial vehicle (MAV) applications.

The first part of the paper deals with an introduction to MEMS pressure sensors and mathematical relations for its fabrication. The second part covers pressure sensing principles followed by the application of MEMS pressure sensors in five major fields of aerospace industry.

In this paper, various pressure sensing principles in MEMS and applications of MEMS technology in the aerospace industry have been reviewed. Five application fields have been investigated including: Propulsion/Turbomachinery applications, turbulent flow diagnosis, experimental aerodynamics, micro-flow control and UAV/MAV applications. Applications of MEMS sensors in the aerospace industry are quite limited due to requirements of very high accuracy, high reliability and harsh environment survivability. However, the potential for growth of this technology is foreseen due to inherent features of MEMS sensors’ being light weight, low cost, ease of batch fabrication and capability of integration with electric circuits. All these advantages are very relevant to the aerospace industry. This work is an endeavor to present a comprehensive review of such MEMS pressure sensors, which are used in the aerospace industry and have been reported in recent literature.

As per the author’s understanding, usage of MEMS pressure sensors in the aerospace industry is quite limited due to cost constraints and indirect measurement approaches owing to the inability to locate sensors in harsh environments. Present work is a prime effort in summarizing the published literature for application of MEMS pressure sensors in the said field. Five broad application areas have been investigated including: propulsion/turbomachinery applications, turbulent flow diagnosis, experimental aerodynamics, micro-flow control and UAV/MAV applications.

With aims to increase the aerodynamic efficiency of aerodynamic surfaces, study on flow control over these surfaces has gained importance. With the addition of flow control devices such as synthetic jets and vortex generators, the flow characteristics can be modified over the surface and, at the same time, enhance the performance of the body. One such flow control device is the tubercle. Inspired by the humpback whale’s flippers, these leading-edge serrations have improved the aerodynamic efficiency and the lift characteristics of airfoils and wings. This paper aims to discusses in detail the flow physics associated with tubercles and their effect on swept wings.

This study involves a series of experimental and numerical analyses that have been performed on four different wing configurations, with four different sweep angles corresponding to 0°, 10°, 20° and 30° at a low Reynolds number corresponding to Re_c=100,000.

Results indicate that the effect of tubercles diminishes with an increase in wing sweep. A significant performance enhancement was observed in the stall and post-stall regions. The addition of tubercles led to a smooth post-stall lift characteristic compared to the sudden loss in the lift with regular wings. Among the four different wings under observation, it was found that tubercles were most effective on the 0° configuration (no sweep), showing a 10.8% increment in maximum lift and a 38.5% increase in the average lift generated in the post-stall region. Tubercles were least effective on 30° configuration. Furthermore, with an increase in wing sweep, co-rotating vortices were distinctly observed rather than counter-rotating vortices.

While extensive numerical and experimental studies have been performed on straight wings with tubercles, studies on the tubercle effect on swept wings at low Reynolds number are minimal and mainly experimental in nature. This study uses numerical methods to explore the complex flow physics associated with tubercles and their implementation on swept wings. This study can be used as an introductory study to implement passive flow control devices in the low Reynolds number regime.

One of the best methods to improve wind turbine aerodynamic performance is modification of the blade’s airfoil. The purpose of this paper is to investigate the effects of gurney flap geometry and its oscillation parameters on the pitching NACA0012 airfoil.

This numerical solution has been carried out for different cases of gurney flap mounting angles, heights, reduced frequencies and oscillation amplitudes, then the results were compared to each other. The finite volume method was used for the discretization of the governing equations, and the PISO algorithm was used to solve the equations. Also, the “SST” was adopted as the turbulence model in the simulation.

In this paper, the different parameters of gurney flap were investigated. The results showed that the best range of gurney flap height are between 1 and 3.2% of chord and the best ratio of lifting to drag coefficient is achieved in gurney flap with an angle of 90° relative to the chord direction. The dynamic stall angle of the airfoil with gurney flap decreases were compared to without gurney flap. Earlier LEV formation can be one of the main reasons for decreasing the dynamic stall angle of the airfoil with gurney flap. Increasing the reduced frequency and oscillation amplitude causes rising of maximum lift coefficient and consequently lift curve slope. Moreover, gurney flap with mounting angle has a lower hinge moment than the gurney flap without mounting angle but with the same vertical axis length. So, there is more complexity in structural design concerning the gurney flap without mounting angle.

Improving aerodynamic efficiency of airfoils is vital for obtaining more output power in VAWTs. Gurney flaps are one of the best mechanisms to increase the aerodynamic performance of the airfoil and increases the efficiency of VAWTs.

Investigating the hinge moment on the connection point of the airfoil, gurney flap and try to compare the gurney flap with and without angle.

This paper aims to provide the results of investigations concerning an influence of the tyre with longitudinal grooves on the car body aerodynamics. It is considered as an important aspect affecting the vehicle aerodynamic drag.

To investigate a contribution of grooved tyres to the overall vehicle drag, three wind tunnel experimental campaigns were performed (two by Peugeot Société Anonyme Peugeot Citroen, one at the Lodz University of Technology). In parallel, computational fluid dynamics (CFD) simulations were conducted with the ANSYS CFX software to enable formulation of wider conclusions.

The research shows that optimised tread patterns can be derived on a single tyre via a CFD study in combination with a controlled experiment to deliver designs actively lowering the overall vehicle aerodynamic drag.

A reduction in the aerodynamic drag is one of ways to decrease vehicle fuel consumption. Alternatively, it can be translated into an increase in the maximum travel velocity and the maximum distance driven (key factor in electric vehicles), as well as in a reduction of CO₂ emissions. Finally, it can improve the vehicle driving and steering stability.

The tyre tread pattern analysis on isolated wheels provides an opportunity to cut costs of R&D and could be a step towards isolating aerodynamic properties of tyres, irrespective of the car body on which they are applied.

The paper focuses on the evaluation of a light aircraft spin. The main purpose of this paper is to achieve reliable mathematical models of aircraft motion beyond stall conditions to subsequently predict spin properties based on calculation only. Another vitally significant objective is to verify whether the aerodynamic characteristics determined numerically are coherent with the wind tunnel measurements performed on the dynamically scaled aircraft models.

The analysis was carried out for two certified conventional light aircraft. The first part of the investigation is devoted to the verification of the simplified methods used to identify the aircraft recoverability from spinning steady-state turns and estimate the primary post-stall flight parameters. Then, the spin simulations were executed. The computational results were thereafter compared with the in-flight data recordings.

The study confirms the coincidence between the calculated spinning behaviour and the observed aircraft response during the flight tests. The mathematical models of aircraft spatial motion have been found to be credible for predicting spin properties. The simplified methods are reliable to determine the basic spin performance of light aircraft at the preliminary design stage, whereas the spin simulations enable recognition and comprehensive examination of all spin modes.

The outcomes of conducted calculation and comparisons of computational spin properties with flight test recordings have indicated that the qualitative assessment of spinning motion is enabled at each stage of the designing process.

The paper involves the comparison of the computational results with the recordings of spin in-flight tests and the correlation between calculated and experimentally obtained aerodynamics of light aircraft.

Examination in Article I of the nature of the force arising on a body in steady motion through the atmosphere, showed it to depend upon the shape and size of the body, the density and viscosity of the air, and the relative velocity. No other factor enters which cannot be traced to these variables until, at velocities approaching that of sound, compressibility makes itself felt. Mathematical difficulties compel us to leave the question of shape to the laboratory, where smallscale models may be suspended in an artificial wind, and aerodynamical details determined by practical means. The design of aircraft from experimental data, with regard to shape, may involve, however, large changes in the other variables, and it is essential to investigate at the outset what means and justification exist for the transition.

Nowadays flaps and winglets are one of the main mechanisms to increase airfoil efficiency. This study aims to investigate the power performance of vertical axis wind turbines (VAWT) that are equipped with diverse gurney flaps. This study could play a crucial role in the design of the VAWT in the future.

In this paper, the two-dimensional computational fluid dynamics simulation is used. The second-order finite volume method is used for the discretization of the governing equations.

The results show that the gurney flap enhances the power coefficient at the low range of tip speed ratio (TSR). When an angled and standard gurney flap case has the same aerodynamic performance, an angled gurney flap case has a lower hinge moment on the junction of airfoil and gurney flap which shows the structural excellence of this case. In all gurney flap cases, the power coefficient increases by an average of 20% at the TSR range of 0.6 to 1.8. The gurney flap cases do not perform well at the high TSR range and the results show a lower amount of power coefficient compare to the clean airfoil.

The angled gurney flap which has the structural advantage and is deployed to the pressure side of the airfoil improves the efficiency of VAWT at the low and medium range of TSR. This study recommends using a controllable gurney flap which could be deployed at a certain amount of TSR.

The purpose of this paper is to analyze experimentally subsonic wake of a supercritical airfoil undergoing a pitch–hold–return motion. The focus of the investigation has been narrowed to concentrate on the steadiness of the flow field in the wake of the airfoil and the role of reduced frequency, amplitude and the hold phase duration.

All experiments were conducted in a low sub-sonic closed-circuit wind tunnel, at a Reynolds number of approximately 600,000. The model was a supercritical airfoil having 10% thickness and wall-to-wall in ground test facilities. To calculate the velocity distribution in the wake of the airfoil, total and static pressures were recorded at a distance of one chord far from the trailing edge, using pressure devices. The reduced frequency was set at 0.012, 0.03 and the motion pivot was selected at c/4.

Analysis of the steadiness of the wake flow field ascertains that an increase in reduced frequency leads to further flow time lag in the hold phase whereas decreases the time that the wake remains steady after the start of the return portion. Also, the roles of amplitude and stall condition are examined.

Examination of a pitch–hold–return motion is substantial in assessment of aerodynamics of maneuvers with a rapid increase in angle of attack. Moreover, study of aerodynamic behavior of downstream flow field and its steadiness in the wake of the airfoil is vital in drag reduction and control of flapping wings, dynamic stability and control of aircrafts.

In the present study, to discuss the steadiness of the flow field behind the airfoil some statistical methods and concept of histogram using an automatic algorithm were used and a specific criterion to characterize the steadiness of flow field was achieved.

There are sixteen papers in the present volume, of which three are on photoelasticity, five on other means of making strain measurements, three on the use of electrical resistance strain gauges in structures and mechanisms, three connected with testing machines and two reviews.