Search results

1 – 10 of 10
Article
Publication date: 1 December 2022

Naveenkumar R., Shanmugam S. and Veerappan AR

The purpose of this paper is to understand the effect of basin water depth towards the cumulative distillate yield of the traditional and developed single basin double slope solar…

Abstract

Purpose

The purpose of this paper is to understand the effect of basin water depth towards the cumulative distillate yield of the traditional and developed single basin double slope solar still (DSSS).

Design/methodology/approach

Modified single basin DSSS integrated with solar operated vacuum fan and external water cooled condenser was fabricated using aluminium material. During sunny season, experimental investigations have been performed in both conventional and modified DSSS at a basin water depth of 3, 6, 9 and 12 cm. Production rate and cumulative distillate yield obtained in traditional and developed DSSS at different water depths were compared and best water depth to attain the maximum productivity and cumulative distillate yield was found out.

Findings

Results indicated that both traditional and modified double SS produced maximum yield at the minimum water depth of 3 cm. Cumulative distillate yield of the developed SS was 16.39%, 18.86%, 15.22% and 17.07% higher than traditional at water depths of 3, 6, 9 and 12 cm, respectively. Cumulative distillate yield of the developed SS at 3 cm water depth was 73.17% higher than that of the traditional SS at 12 cm depth.

Originality/value

Performance evaluation of DSSS at various water depths by integrating the combined solar operated Vacuum fan and external Condenser.

Details

World Journal of Engineering, vol. 21 no. 2
Type: Research Article
ISSN: 1708-5284

Keywords

Open Access
Article
Publication date: 26 December 2023

Dorothy Ai-wan Yen, Benedetta Cappellini, Jane Denise Hendy and Ming-Yao Jen

The COVID-19 pandemic has caused severe challenges to ethnic minorities in the UK. While the experiences of migrants are both complex and varied depending on individuals' social…

Abstract

Purpose

The COVID-19 pandemic has caused severe challenges to ethnic minorities in the UK. While the experiences of migrants are both complex and varied depending on individuals' social class, race, cultural proximity to the host country and acculturation levels, more in-depth studies are necessary to fully understand how COVID-19 affects specific migrant groups and their health. Taiwanese migrants were selected because they are an understudied group. Also, there were widespread differences in pandemic management between the UK and Taiwan, making this group an ideal case for understanding how their acculturation journey can be disrupted by a crisis.

Design/methodology/approach

Qualitative data were collected at two different time points, at the start of the UK pandemic (March/April 2020) and six months on (October/November 2020), to explore migrant coping experiences over time. Theoretically, the authors apply acculturation theory through the lens of coping, while discussing health-consumption practices, as empirical evidence.

Findings

Before the outbreak of the pandemic, participants worked hard to achieve high levels of integration in the UK. The pandemic changed this; participants faced unexpected changes in the UK’s sociocultural structures. They were forced to exercise the layered and complex “coping with coping” in a hostile host environment that signalled their new marginalised status. They faced impossible choices, from catching a life-threatening disease to being seen as overly cautious. Such experience, over time, challenged their integration to the host country, resulting in a loss of faith in the UK’s health system, consequently increasing separation from the host culture and society.

Research limitations/implications

It is important to note that the Taiwanese sample recruited through Facebook community groups is biased and has a high level of homogeneity. These participants were well-integrated, middle-class migrants who were highly educated, relatively resourceful and active on social media. More studies are needed to fully understand the impact on well-being and acculturation of migrants from different cultural, contextual and social backgrounds. This being the case, the authors can speculate that migrants with less resource are likely to have found the pandemic experience even more challenging. More studies are needed to fully understand migrant experience from different backgrounds.

Practical implications

Public health policymakers are advised to dedicate more resources to understand migrants' experiences in the host country. In particular, this paper has shown how separation, especially if embraced temporarily, is not necessarily a negative outcome to be corrected with specific policies. It can be strategically adopted by migrants as a way of defending their health and well-being from an increasingly hostile environment. Migrants' home country experience provides vicarious learning opportunities to acquire good practices. Their voices should be encouraged rather than in favour of a surprising orthodox and rather singular approach in the discussion of public health management.

Social implications

The paper has clear public health policy implications. Firstly, public health policymakers are advised to dedicate more resources to understand migrants' experiences in the host country. Acknowledging migrants' voice is a critical first step to contribute to the development of a fair and inclusive society. Secondly, to retain skilful migrants and avoid a future brain-drain, policymakers are advised to advance existing infrastructure to provide more incentives to support and retain migrant talents in the post-pandemic recovery phase.

Originality/value

This paper reveals how a group of previously well-integrated migrants had to exercise “coping with coping” during the COVID crisis. This experience, over time, challenged their integration to the host country, resulting in a loss of faith in the UK’s health system, consequently increasing separation from the host culture and society. It contributes to the understanding of acculturation by showing how a such crisis can significantly disrupt migrants' acculturation journey, challenging them to re-acculturate and reconsider their identity stance. It shows how separation was indeed a good option for migrants for protecting their well-being from a newly hostile host environment.

Details

International Marketing Review, vol. 41 no. 7
Type: Research Article
ISSN: 0265-1335

Keywords

Book part
Publication date: 19 March 2024

Noah McClain

In the mid-2000s, the operator of New York City’s mass transit network committed more than a half-billion dollars to military contractor Lockheed Martin for a security technology…

Abstract

In the mid-2000s, the operator of New York City’s mass transit network committed more than a half-billion dollars to military contractor Lockheed Martin for a security technology capable, in part, of inferring threats based on analysis of data streams, of developing response strategies, and taking automated action toward alerts and calamities in light of evolving circumstances. The project was a failure. This chapter explores the conceptualization and development of this technology – rooted in cybernetics – and compares its conceptual underpinnings with some situated problems of awareness, communication, coordination, and action in emergencies as they unfold in one of the busiest transport systems in the world, the New York subway. The author shows how the technology, with all the theatrical trappings of a “legitimate” security solution, was apparently conceived without a grounded understanding of actual use-cases, and the degree to which the complex interactions which give rise to subway emergency can be anticipated in – and therefore managed through – a technological system. As a case-study, the chapter illustrates the pitfalls of deploying technology against problems which are not well-defined in the first place, to the neglect of investments against much more fundamental problems – such as inadequate communication systems, and unstable relationships with emergency response agencies – which might offer guaranteed benefits, and indeed lay a firm groundwork for future deployment of more ambitious technology.

Details

Technology vs. Government: The Irresistible Force Meets the Immovable Object
Type: Book
ISBN: 978-1-83867-951-4

Keywords

Abstract

Details

Time of Death
Type: Book
ISBN: 978-1-80455-006-9

Article
Publication date: 20 March 2024

Hakan F. Oztop, Burak Kiyak and Ishak Gökhan Aksoy

This study aims to focus on understanding how different jet angles and Reynolds numbers influence the phase change materials’ (PCMs) melting process and their capacity to store…

Abstract

Purpose

This study aims to focus on understanding how different jet angles and Reynolds numbers influence the phase change materials’ (PCMs) melting process and their capacity to store energy. This approach is intended to offer novel insights into enhancing thermal energy storage systems, particularly for applications where heat transfer efficiency and energy storage are critical.

Design/methodology/approach

The research involved an experimental and numerical analysis of PCM with a melting temperature range of 22 °C–26°C under various conditions. Three different jet angles (45°, 90° and 135°) and two container angles (45° and 90°) were tested. Additionally, two different Reynolds numbers (2,235 and 4,470) were used to explore the effects of jet outlet velocities on PCM melting behaviour. The study used a circular container and analysed the melting process using the hot air inclined jet impingement (HAIJI) method.

Findings

The obtained results showed that the average temperature for the last time step at Ф = 90° and Re = 4,470 is 6.26% higher for Ф = 135° and 14.23% higher for Ф = 90° compared with the 45° jet angle. It is also observed that the jet angle, especially for Ф = 90°, is a much more important factor in energy storage than the Reynolds number. In other words, the jet angle can be used as a passive control parameter for energy storage.

Originality/value

This study offers a novel perspective on the effective storage of waste heat transferred with air, such as exhaust gases. It provides valuable insights into the role of jet inclination angles and Reynolds numbers in optimizing the melting and energy storage performance of PCMs, which can be crucial for enhancing the efficiency of thermal energy storage systems.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 22 March 2024

João Eduardo Sampaio Brasil, Fabio Antonio Sartori Piran, Daniel Pacheco Lacerda, Maria Isabel Wolf Morandi, Debora Oliveira da Silva and Miguel Afonso Sellitto

The purpose of this study is to evaluate the efficiency of a Brazilian steelmaking company’s reheating process of the hot rolling mill.

Abstract

Purpose

The purpose of this study is to evaluate the efficiency of a Brazilian steelmaking company’s reheating process of the hot rolling mill.

Design/methodology/approach

The research method is a quantitative modeling. The main research techniques are data envelopment analysis, TOBIT regression and simulation supported by artificial neural networks. The model’s input and output variables consist of the average billet weight, number of billets processed in a batch, gas consumption, thermal efficiency, backlog and production yield within a specific period. The analysis spans 20 months.

Findings

The key findings include an average current efficiency of 81%, identification of influential variables (average billet weight, billet count and gas consumption) and simulated analysis. Among the simulated scenarios, the most promising achieved an average efficiency of 95% through increased equipment availability and billet size.

Practical implications

Additional favorable simulated scenarios entail the utilization of higher pre-reheating temperatures for cold billets, representing a large amount of savings in gas consumption and a reduction in CO2 emissions.

Originality/value

This study’s primary innovation lies in providing steelmaking practitioners with a systematic approach to evaluating and enhancing the efficiency of reheating processes.

Details

Management of Environmental Quality: An International Journal, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1477-7835

Keywords

Open Access
Article
Publication date: 28 February 2024

Hassan Th. Alassafi, Khalid S. Al-Gahtani, Abdulmohsen S. Almohsen and Abdullah M. Alsugair

Heating, ventilating, air-conditioning and cooling (HVAC) systems are crucial in daily health-care facility services. Design-related defects can lead to maintenance issues…

Abstract

Purpose

Heating, ventilating, air-conditioning and cooling (HVAC) systems are crucial in daily health-care facility services. Design-related defects can lead to maintenance issues, causing service disruptions and cost overruns. These defects can be avoided if a link between the early design stages and maintenance feedback is established. This study aims to use experts’ experience in HVAC maintenance in health-care facilities to list and evaluate the risk of each maintenance issue caused by a design defect, supported by the literature.

Design/methodology/approach

Following semistructured interviews with experts, 41 maintenance issues were identified as the most encountered issues. Subsequently, a survey was conducted in which 44 participants evaluated the probability and impact of each design-caused issue.

Findings

Chillers were identified as the HVAC components most prone to design defects and cost impact. However, air distribution ducts and air handling units are the most critical HVAC components for maintaining healthy conditions inside health-care facilities.

Research limitations/implications

The unavailability of comprehensive data on the cost impacts of all design-related defects from multiple health-care facilities limits the ability of HVAC designers to furnish case studies and quantitative approaches.

Originality/value

This study helps HVAC designers acquire prior knowledge of decisions that may have led to unnecessary and avoidable maintenance. These design-related maintenance issues may cause unfavorable health and cost consequences.

Article
Publication date: 18 March 2024

Lifeng Wang, Fei Yu, Ziwang Xiao and Qi Wang

When the reinforced concrete beams are reinforced by bonding steel plates to the bottom, excessive use of steel plates will make the reinforced concrete beams become…

Abstract

Purpose

When the reinforced concrete beams are reinforced by bonding steel plates to the bottom, excessive use of steel plates will make the reinforced concrete beams become super-reinforced beams, and there are security risks in the actual use of super-reinforced beams. In order to avoid the occurrence of this situation, the purpose of this paper is to study the calculation method of the maximum number of bonded steel plates to reinforce reinforced concrete beams.

Design/methodology/approach

First of all, when establishing the limit failure state of the reinforced member, this paper comprehensively considers the role of the tensile steel bar and steel plate and takes the load effect before reinforcement as the negative contribution of the maximum number of bonded steel plates that can be used for reinforcement. Through the definition of the equivalent tensile strength, equivalent elastic modulus and equivalent yield strain of the tensile steel bar and steel plate, a method to determine the relative limit compression zone height of the reinforced member is obtained. Second, based on the maximum ratio of (reinforcement + steel plate), the relative limit compression zone height and the equivalent tensile strength of the tensile steel bar and steel plate of the reinforced member, the calculation method of the maximum number of bonded steel plates is derived. Then, the static load test of the test beam is carried out and the corresponding numerical model is established, and the reliability of the numerical model is verified by comparison. Finally, the accuracy of the calculation method of the maximum number of bonded steel plates is proved by the numerical model.

Findings

The numerical simulation results show that when the steel plate width is 800 mm and the thickness is 1–4 mm, the reinforced concrete beam has a delayed yield platform when it reaches the limit state, and the failure mode conforms to the basic stress characteristics of the balanced-reinforced beam. When the steel plate thickness is 5–8 mm, the sudden failure occurs without obvious warning when the reinforced concrete beam reaches the limit state. The failure mode conforms to the basic mechanical characteristics of the super-reinforced beam failure, and the bending moment of the beam failure depends only on the compressive strength of the concrete. The results of the calculation and analysis show that the maximum number of bonded steel plates for reinforced concrete beams in this experiment is 3,487 mm2. When the width of the steel plate is 800 mm, the maximum thickness of the steel plate can be 4.36 mm. That is, when the thickness of the steel plate, the reinforced concrete beam is still the balanced-reinforced beam. When the thickness of the steel plate, the reinforced concrete beam will become a super-reinforced beam after reinforcement. The calculation results are in good agreement with the numerical simulation results, which proves the accuracy of the calculation method.

Originality/value

This paper presents a method for calculating the maximum number of steel plates attached to the bottom of reinforced concrete beams. First, based on the experimental research, the failure mode of reinforced concrete beams with different number of steel plates is simulated by the numerical model, and then the result of the calculation method is compared with the result of the numerical simulation to ensure the accuracy of the calculation method of the maximum number of bonded steel plates. And the study does not require a large number of experimental samples, which has a certain economy. The research result can be used to control the number of steel plates in similar reinforcement designs.

Details

International Journal of Structural Integrity, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1757-9864

Keywords

Article
Publication date: 29 March 2024

Rıza Atav and Özge Çolakoğlu

The purpose of this study is to determine the effect of laser treatment on disperse dye-uptake and fastness values of polyester fabrics. Furthermore, it was aimed to evaluate…

Abstract

Purpose

The purpose of this study is to determine the effect of laser treatment on disperse dye-uptake and fastness values of polyester fabrics. Furthermore, it was aimed to evaluate colors directly over the photos of fabric samples instead of color measuring with spectrophotometer which is thought to be useful in terms of online digital color assessment.

Design/methodology/approach

In this study, 100% polyester (150 denier) single jersey knitted fabrics (weight: 145 g/m2, course density: 15 loops/cm, wale density: 24 loops/cm) were used in the trials. The effect of laser treatments before and after dyeing on color was investigated. Laser treatments were applied to fabrics at different resolutions (20, 25 and 30 dpi) and pixel times (60, 80 and 100 µs) before dyeing. The power of the laser beam was 210 W and the wavelength was 10.6 µm. In order to determine the effect of laser treatment on polyester; FTIR analysis, SEM-EDX analysis and bursting strength tests were applied to untreated and treated fabric samples.

Findings

It was found that treatments with laser have a significant effect on disperse dye-uptake of polyester fibers, and for this reason laser-treated fabrics were dyed in darker shade. Furthermore, it was determined that the samples treated at 30 dpi started to melt and the fabric was damaged considerably, but the fabrics treated at 20 and 25 dpi were not affected at all. Another result obtained regarding the use of laser technology in polyester fabrics is that if some areas of fabrics are not treated with laser and some other areas are treated with laser at 20 dpi 60 µs and 25 dpi 60 µs, it will be possible to obtain patterns containing three different shades of the same color on the fabric.

Originality/value

When the literature is examined, it is seen that there are various studies on the dyeability and patterning of polyester fabrics with disperse dyes by laser technology. As it is known, today color measurement is done digitally using a spectrophotometer. However, when we look at a photograph on computer screens, the colors we see are defined by RGB (red-green-blue) values, while in the spectrophotometer they are defined by L*a*b* (L*: lightness-darkness, a*: redness-greenness, b*: yellowness-blueness) values. Especially when it is desired to produce various design products by creating patterns with laser technology, it would be more useful to show the color directly to the customer on the computer screen and to be able to speak over the same values on the color. For this reason, in this study, the color measurement of the fabric samples was not made with a spectrophotometer, instead, the RGB values obtained from the photographs of the samples were converted into L*a*b* values with MATLAB and interpreted, that is, a digital color evaluation was made on the photographs. Therefore, it is believed that this study will contribute to the literature.

Details

International Journal of Clothing Science and Technology, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0955-6222

Keywords

Content available
Article
Publication date: 21 September 2023

Renan Favarão da Silva and Gilberto Francisco Martha de Souza

The Maintenance Management Framework for Asset Management (MMFAM) is a recently modeled framework to ensure the alignment of maintenance management with physical asset management…

Abstract

Purpose

The Maintenance Management Framework for Asset Management (MMFAM) is a recently modeled framework to ensure the alignment of maintenance management with physical asset management based on the ISO 55000 series for asset management. In this context, the purpose of this paper is to discuss the applicability of the MMFAM considering the operational context of a hydroelectric power plant.

Design/methodology/approach

The paper adopted the case study method for the discussion of the applicability of the MMFAM to a real operational context. A hydroelectric power plant was chosen as the scope of the case study due to its relevance since the electricity sector is an example of an asset-intensive industry in which asset management performance is fundamental. To gain a detailed understanding of the organization, data were collected through direct requests to the plant, informal meetings with technical collaborators, a technical visit to the hydroelectric plant and on-site data collection. Then, the MMFAM processes were demonstrated based on this information and the results supported the discussion of the MMFAM applicability.

Findings

The case study provided a deeper understanding of the processes included in the MMFAM. In addition, the results suggested the applicability of the framework to other organizations besides the hydroelectric sector due to its generic approach and the possibility of choosing appropriate tools to support and implement the MMFAM processes.

Practical implications

The case study is expected to contribute to the practical understanding of the MMFAM processes within an operational context and assist maintenance professionals and researchers in their implementation in other organizations.

Originality/value

Although the literature provides different maintenance management frameworks, their practical discussion based on a real operational context is still a gap. Accordingly, this paper discusses the MMFAM under a case study method to expand its understanding beyond theory and contribute to practical comprehension in depth.

Details

Journal of Quality in Maintenance Engineering, vol. 30 no. 1
Type: Research Article
ISSN: 1355-2511

Keywords

1 – 10 of 10