Search results

The purpose of this paper is to speak about the production of biodiesel from waste cooking oil which serves as an alternate fuel in the absence of conventional fuels such as diesel and petrol. Though much research work was carried out using non-edible crops such as Jatropha and Pongamia, cooking oil utilized in bulk quantity is discarded as a waste. This is reused again as it contains more of esters that when combined with an alcohol in presence of an enzyme as a catalyst yields triglycerides (biodiesel).

The lipase producing strain Rhizopus oryzae and pure enzyme lipase is immobilized and treated with waste cooking oil for the production of FAME. Reaction parameters such as temperature, time, oil to acyl acceptor ratio and enzyme concentration were considered for purified lipase and in the case of Rhizopus oryzae, pH, olive oil concentration and rpm were considered for optimization studies. The response generated through each run were evaluated and analyzed through the central composited design of response surface methodology and thus the optimized reaction conditions were determined.

A high conversion (94.01 percent) was obtained for methanol when compared to methyl acetate (91.11 percent) and ethyl acetate (90.06 percent) through lipase catalyzed reaction at oil to solvent ratio of 1:3, enzyme concentration of 10 percent at 30°C after 24 h. Similarly, for methanol a high conversion (83.76 percent) was obtained at an optimum pH of 5.5, olive oil concentration 25 g/L and 150 rpm using Rhizopus oryzae when compared to methyl acetate (81.09 percent) and ethyl acetate (80.49 percent).

This research work implies that the acyl acceptors methyl acetate and ethyl acetate which are novel solvents for biodiesel production can also be used to obtain high yields as compared with methanol under optimized conditions.

A number of resins have recently been introduced by Cray Valley Products to meet market demands for new components for flexographic, gravure and screen inks. This article summarises the basic characteristics of these resins and gives a selection of starting point formulations.

Industrial cellulose nitrate, sometimes called pyroxylin, collodion cotton or nitrocotton, is made by treating cellulose in the form of cotton (inters (threads) or woodpulp with a large excess of mixed nitric and sulphuric acid controlled to fine limits as regards strength of acid and the time and temperature of the nitration. Following a water washing process, the nitrocellulose is partially dried and the remaining water displaced by the selected damping medium — industrial methylated spirit, isopropanol or butanol. For certain purposes the nitrocellulose is damped with water.

The growing range of EEC Directives and Regulations for food products, some of which have never been subject to statutory control in this country, with compositional standards, and in particular, prescribed methods of analysis — something which has not featured in the food legislative policies here — must be causing enforcement authorities and food processors to think seriously, if as yet not furiously. Some of the prescribed methods of analysis are likely to be less adaptable to modern processing methods of foods and as Directives seem to be requiring more routine testing, there is the matter of cost. Directive requirements are to some extent negotiable — the EEC Commission allow for regional differences, e.g., in milk and bread — but it has to be remembered that EEC Regulations bind Member‐states from the date of notification by the Commission, over‐riding the national law. Although not so frequently used for food legislation, they constitute one of the losses of sovereign power, paraded by the anti‐market lobby. Regulations contain usual clauses that they “shall enter into force on the day following publication in the Official Journal of the European Communities” and that they “shall be binding in their entirety and directly applicable in all Member States”.

For many years now food and drugs authorities (and the public) have been complaining about the low meat content of meat pies on sale and the need of a standard is self‐evident. The pie filling is not visible to the purchaser and often consists of a mixture of meat and cereal from the appearance of which it is impossible to assess the amount of meat present. The sale of made up cooked foods has increased among all such products in recent years, but for meat pies the increase has been phenomenal.

Coatings and inks formulated with Chlorothene SM compliance solvent offer darker and richer colours than those formulated with conventional solvents, according to Dow laboratory tests. The results indicate formulators using the fast drying solvent can reduce overall pigment load — and hence formulating costs — while maintaining or improving colour quality.

This study is designed to determine the antioxidant profile of the crude aqueous and organic (Ethyl acetate) extract of 11 plants. These plants are mainly distributed in north eastern (NE) zones of India. Extracts of the aerial and/or underground parts have been applied in traditional medicine for the treatment of different diseases hence they have gained sufficient importance in alternate medicinal therapy.

The present study was carried out to evaluate the antioxidant activities of extracts NE in vitro systems to gain mechanistic insights.

Results from antioxidant assays together with authentic antioxidant standards revealed that aqueous extract (AqEx) showed strong superoxide radical scavenging activity, reducing power, and ferrous ion‐chelating ability. The ranges of total phenolic contents was determined and found from 2.0860 to 7.1193 in aqueous extract and 1.7716 to 5.4330 mg (GAEq/100 g) in ethylacetate extract. The results revealed that total flavonoid contents in the selected plant from NE and the range of the extract varied from 0.1769 to 1.6990 mg (QEq/100 g), respectively.

The present study focuses on the antioxidant activity of 11 extracts of Indian origin. The plant extracts are also screened for flavonoid contents and total phenolics.

The purpose of this paper is to assess the potential of papaya juice fermentation and to evaluate the kinetic changes of volatile organic compounds (VOCs) produced during fermentation by three commercial wine yeasts.

Laboratory‐scale fermentations were carried out in papaya juice using three commercial wine yeasts Saccharomyces cerevisiae var. bayanus strains EC‐1118 and R2, and S. cerevisiae MERIT.ferm. Brix, pH, optical density and yeast cell count were determined during fermentation. VOCs were analysed by headspace‐solid phase microextraction with gas chromatography‐mass spectrometry‐flame ionization detector (HS‐SPME‐GC‐MS/FID).

During fermentation, the three wine yeasts grew actively and showed similar growth patterns. Changes in Brix and pH were similar among the three yeasts. A range of VOCs were produced during fermentation including fatty acids, alcohols, acetaldehyde, esters and acetoin. Esters were the most abundant VOCs produced. Some VOCs indigenous to the papaya juice such as benzaldehyde, β‐damascenone and benzyl isothiocyanate were consumed during fermentation. Some VOCs increased initially, and then decreased during fermentation. Overall, the profiles of VOC changes during fermentation were similar among the three yeasts with some differences observed.

The paper suggests that papaya fermentation with S. cerevisiae yeasts are likely to result in papaya wine with similar flavours. New approaches are required to produce papaya wine with distinct flavours and to enable differentiation of papaya wines by exploiting non‐Saccharomyces yeasts in conjunction with Saccharomyces yeasts and/or by adding selected nitrogen sources.

The purpose of this paper is to identify and analyse the fermentative properties of a strain of indigenous Wickerhamomyces anomalus (W. anomalus) from Rosa roxburghii Tratt (R. roxburghii).

Morphological and molecular methods were used to determine the species of the selected strain W. anomalus C11. The physiological tolerances to glucose, ethanol, citric acid and sulphur dioxide (SO₂) were further assessed by checking the growth of cells, and the oenological performances were proved to measure the related fermentative properties of R. roxburghii wines.

The W. anomalus C11 strain could be grown faster than commercial S. cerevisiae X16 in its logarithmic growth period and had preferable tolerances to glucose, ethanol, citric acid and SO₂. Moreover, this strain of native R. roxburghii yeast W. anomalus C11 produced less sulphuretted hydrogen and had a higher β-glucosidase activity. Furthermore, W. anomalus C11 could reduce the volatile acids, reduce the sourness and enhance volatile aroma richness and complexity of R. roxburghii wines including types of aroma and content thereof. Taken together, the R. roxburghii native yeast W. anomalus C11 may have potential for use in R. roxburghii winemaking.

(1) The fermentative properties of a strain of indigenous W. anomalus (named as C11) from R. roxburghii was evaluated. (2) The strain of W. anomalus C11 had preferable tolerances to glucose, ethanol, citric acid and SO₂. (3) This strain of native R. roxburghii yeast W. anomalus C11 produced less sulphuretted hydrogen and had a higher ß-glucosidase activity. (4) W. anomalus C11 could reduce the volatile acids, reduce the sourness and enhance volatile aroma richness and complexity of R. roxburghii wines including types of aroma and content thereof.

About 30 years have passed since the initial work in the field of polyurethane compounds was begun. This work has resulted in a wide choice of materials for use in surface coatings. The commercial development of aliphatic urethane prepolymers during the past few years has made possible the formulation of exterior coatings with good weathering properties.