Search results

This study aims to examine the perceptions of students about learning science and physics using the engineering design process (EDP).

The study employed a mixed-methods research design: The quantitative session features a pre–post-test control group study. In the qualitative aspect, the study conducted semistructured interviews for data collection. In the experimental group, the flipped classroom (FC) model and an instructional design are combined to design, develop and implement a physics course using the steps of the EDP, while the conventional method was applied to the control group. The respondents are students of the Department of Mechanical Engineering at Cao Thang Technical College in Vietnam for the academic year 2022–2023. The control and experimental groups are composed of 80 students each. An independent sample Mann–Whitney U test is applied to the quantitative data, while thematic analysis is employed for the qualitative data.

The results demonstrate a statistically significant difference between the experimental and control groups in terms of perceptions about learning science and physics using the EDP, which, when combined with a FC, enhances physics learning for engineering students.

This study implemented the EDP in teaching physics to first-year engineering students in the Department of Mechanical Engineering using the combined FC and instructional design models. The results revealed that a difference exists in the perception of the students in terms of integrating the EDP into learning physics between the experimental and control groups. The experimental group, which underwent the EDP, obtained better results than did the control group, which used the conventional method. The results demonstrated that the EDP encouraged the students to explore and learn new content knowledge by selecting the appropriate solution to the problem. The EDP also helped them integrate new knowledge and engineering skills into mechanical engineering. This research also introduced a new perspective on physics teaching and learning using the EDP for engineering college students.

The research findings are important for teaching and learning physics using EDP in the context of engineering education. Thus, educators can integrate the teaching and learning of physics into the EDP to motivate and engage student learning.

Using the EDP combined with a FC designed under stages of the analyze, design, develop, implement and evaluate (ADDIE) model has enhanced the learning of physics for engineering college students.

The purpose of this study was to examine the learning experiences of high school Black males participating in an academy of engineering that was configured as a magnet school. We followed a qualitative case study design to explore the experiences of 16 Black male academies of engineering students. We identified three recurring themes from the interviews with the Black male academy of engineering students: Promoting Interests in STEM, Drawing Connections to Core Academic Concepts, and An Affinity for Hands-on Learning through the Engineering Curriculum. The results of our study helped us to better understand how academies provide a platform for Black male students' interest in engineering as a viable college and career pathway.

This study aims to explore first-year engineering students’ perceptions of the engineering librarian as an instructor in multimodal environments related to Information Literacy (IL) topics, teaching strategy, content evaluation, organising, planning and support.

A quantitative approach was used through a survey instrument based on an online questionnaire. Questions were adopted and modified from a lecturer evaluation survey. A simple random sampling technique was used to collect data from first-year cohorts of engineering students in 2020 and 2022.

Respondents perception of the engineering librarian as an instructor in multimodal learning environment was good. Findings revealed students’ learning experiences were aligned with IL instruction even though the environment changed from blended to online. However, an emerging theme that continuously appeared was a lack of access to technology.

These findings may help in developing and strengthening the teaching identity of academic librarians as instructors in multimodal learning environments.

To the best of the author’s knowledge, this study is novel in that it evaluates the teaching abilities of an academic librarian in multimodal environments through the lens of students.

It is well-known and documented that despite a plethora of efforts by institutions to broaden participation in engineering, the representation, retention, and degree completion of Black males in engineering continues to lag. Coupled with a lack of representation, there is also a dearth of research that has sought to understand the experiences of Black males in engineering. In this chapter, through the lens of Hildegard Peplau's (1991) interpersonal relations theory, we sought to explore the experiences of nine undergraduate Black male engineering majors with academic advisors. Academic advisors are strategically positioned in higher education settings as guides to help students navigate college culture, policies, and procedures. Using thematic analysis, three salient themes emerged: “spots are limited,” building their own “advising team,” and prescriptive perceptions. As institutions imagine routes for broadening participation in engineering, they might also consider how they support advisors and encourage relationship development between students and advisors.

Upon graduating from university, many engineers will work in new product development and/or technology adoption for continuous improvement and production optimization. These jobs require employees to be cognizant of ethical practices and implications for design. However, little engineering coursework, outside the traditional ABET (Accreditation Board for Engineering and Technology) required Engineering Ethics course, accounts for the role of ethics within this process. Because of this, engineering students have few learning opportunities to practice and reflect on ethical decision-making.

This paper highlights one approach to integrating ethics into an engineering course (outside of engineering ethics). Specifically, the study is implemented within a five-week module with a focus on big data ethics, as part of a Supply Chain Management Technology course (required for Industrial Engineering Technology majors), using metacognition as the core assessment.

Four main themes were identified through the qualitative data analysis of the metacognitive reflections: (1) overreliance on content knowledge, (2) time management skills, (3) career connections and (4) knowledge extensions.

Three notable points emerged which contribute to the literature. First, this study showcased one example of how an ethics module can be integrated into an engineering course (other than Engineering Ethics). Second, this study demonstrated how metacognitive reflections can be used to reinforce student self-awareness of the learning process and connections to big data ethics in the workplace. Finally, this study exhibited how metacognitive reflection assignments can be deployed as a teaching and learning assessment tool, providing an opportunity for the instructor to make immediate changes as needed.

Participation of women in engineering education is considerably low in India, although it is increasing in recent years. Also, engineering is primarily treated as a male-dominated profession, and the authors do not find many women in this sector. What factors contribute to this significant gender differences in engineering education and labour market in India? In this context, this study aims to examine the factors that explain the gender variations in academic performance and labour market outcomes (placement and earnings) of engineering graduates in India.

The paper is based on primary survey data from fourth-year engineering students in Delhi, collected in 2018–2019, with a total sample size of 3186. The study uses Ordinary least square method (OLS) and Heckman selection model to analyse gender differences in academic performance and labour market outcomes of engineering graduates, respectively.

The study finds that academic performance of male students is around 10.4% more than female students. However, this difference is heavily influenced by various socioeconomic and institutional factors. Interestingly, 3% of female engineering graduates have received more job offers than males, which contradicts the common belief that women engineers face job discrimination in the labour market in India. However, the authors find that male engineers earn around 7% more than female engineers shows the evidence of pro-male gender wage inequality in earnings. The findings support that there is a considerable variation in academic performance and earnings between male and female engineering graduates.

While the authors find some literature in the area of gender difference in the academic performance and labour market among university graduates in India, studies in the field of engineering education are sparse. In a context where fewer women are found in the field of engineering education along with low participation in the labour market, the findings of this study significantly contribute to the policy making.

This study addresses the challenge of integrating entrepreneurial competences development into the traditionally structured engineering curriculum, recognizing its potential contribution to job creation. Specifically, this study proposes a course design that intersects project management and entrepreneurial disciplines, adopting a challenge-based learning approach.

Considering a list of common features that entrepreneurs and engineers—in the role of project managers—should excel at, and building upon the principles of experiential learning, this study proposes and describes a course design that is expected to help engineering students develop entrepreneurial competences. Through a series of assessment instruments and descriptive statistics, the study evaluates its implementation in a pilot test applied in a Project Management course at a Spanish university.

The results demonstrate a significant improvement in students' entrepreneurial competences after completing the course. Noteworthy variations in receptiveness to skill development among different personality profiles are observed. Gender differences are minimal, with the exception of women exhibiting heightened self-perception in the autonomy dimension.

This study explores the common features shared by two often-disconnected disciplines, namely engineering and entrepreneurship. It suggests that integrating both perspectives through a challenge-based course design can enhance entrepreneurial competences among engineering students without compromising the specific knowledge gained from engineering programs. Engaging students in such pedagogical experiences not only fosters entrepreneurial competences but also contributes to their professional and personal growth.

In Germany, various approaches have been taken to tackle the current teacher shortage in technical and vocational education and training (TVET). One attempt to remedy the shortage in Bavaria has been the introduction of an engineering education study programme at universities of applied sciences. Ideal candidates for this programme should have an interest in both engineering and social interaction. For effective recruitment, therefore, it is necessary to know applicants’ characteristics such as their vocational interests. In this study, the vocational interest profiles of students in TVET teacher training programmes were identified and their interest profiles and further characteristics were compared with those of other VET students at universities and universities of applied sciences.

An online questionnaire based on Holland’s interest theory and adapted from the Allgemeiner-Interessen-Struktur-Test-3 (interest structure test) was administered to 85 students in TVET teacher training programmes at universities and universities of applied sciences in Bavaria. Items regarding reasons for choosing a particular study programme, university location and other personal details were added.

The vocational interest profiles of students at universities and universities of applied sciences can be described as similar but weakly differentiated. Insights are provided by the characteristics of students such as the majority being first-time academics in the family. The reasons for choosing the degree programme and university location highlight the fact that a large proportion of students in engineering education would not have chosen a teaching-related degree programme if it had not been offered at the respective university of applied sciences.

Although the sample in this study was small and, therefore, limiting, it represented a high proportion of TVET teacher training students in Bavaria and a substantial proportion of first-year students in TVET teacher training programmes at universities and universities of applied sciences in Bavaria (section 2.2 and 3.1). Thus, the findings provide valuable insights into commonalities in interest profiles between engineering education students at universities of applied sciences and other TVET students at universities. With respect to the domain of the chosen vocational specialisation, differentiated profiles emerged that, for example, showed a stronger artistic orientation among students in construction technology/wood. For further analysis, the previous variable-centred orientation of the analysis can be supplemented by person-centred analyses (e.g. cluster analysis and latent variable mixture modelling, LVMM) (cf. Leon et al., 2021).

The findings in this study reveal the potential for attracting candidates to universities of applied sciences if they prefer to study in rather rural areas close to their hometowns. With the aim to educate prospective teachers for future work not only in metropolitan regions but in rural areas too, offering bachelor degree programmes in rural areas would seem promising. A regional option can boost the recruitment of new students and attract candidates that otherwise would be unable to pursue studies or a career as a teacher in vocational education. The results of this study and those of previous studies suggest that universities of applied sciences can cooperate with universities to help solve the teacher shortage problem.

Overall, it is apparent that the students' interests reached comparatively high values in all interest orientations and thus are only weakly differentiated. If undifferentiated profiles indicate low levels of career readiness, this significantly affects the recruitment of young people for the teaching profession. Assessing career orientation and promoting vocational interests should be prioritised during secondary school education. Vocational orientation measures are essential and should provide insight into typical activities of daily work life in different professions and thus pique and foster interests.

This study provides insight into how to respond to the teacher shortage in VET by identifying important characteristics of engineering education students using vocational interest profiling.

The purpose of this research study is to explore simple collaborative technique for teaching mathematics and thus improving the problem solving skills of the students. Better pedagogic activities are required to motivate the students to perceive mathematics as a subject that stimulates problem-solving skills required for engineers.

This paper presents a research study on the application of technology-supported collaborative learning in improving the problem-solving skills of first-year engineering students in a mathematics course. The experiment was conducted in a mathematics course “Engineering Calculus” with 286 first-year engineering students in two groups: experimental group (N = 60) and controlled group (N = 226). The academic performance of the students was measured and analyzed with statistical techniques.

From the results obtained, it was found that the academic performance of the experimental group was better than the controlled group. Also, interest shown by the students in the topic that dealt with collaborative learning was more than in other topics taught using conventional teaching methods.

The teachers are required to find effective pedagogical activities to improve the problem-solving skills in mathematics. The research work proposes a collaborative method in mathematics for attaining higher cognitive level in an entry level engineering course. The limitation of this study lies in group formation techniques and the grading policy which deals only with individual assessment scores.

Practice of collaborative learning is made easy with simple technology. A clear strategy for the conduct of collaborative learning sessions has been presented. The solutions recommended are practically feasible and does not require any special infrastructure or specific training.

Using technology in mathematics teaching may not be very easy for all teachers. Especially, for an undergraduate engineering fresher, mathematics may not be a very easy task. This work shall bridge the gap with simple technology-assisted collaborative learning. The teachers need not spend too much time and effort in learning technology for mathematics teaching. The effect of this learning is significant in terms of the performance and satisfaction evaluation.

This work presents a systematic implementation of collaborative learning that shall result in improved problem-solving skills and engaging learning sessions. The statistical analysis methods and the visualization of obtained results shall help in understanding the implications of the presented work. Practice of collaborative learning is made easy with simple technology. The solutions recommended are practically feasible and does not require any special infrastructure or specific training.

This research aims to assess and compare project-based learning (PBL) designs to deliver technopreneur in higher education, as a case student of the Industrial Engineering Department. So, it can facilitate students who play a role in facilitating the process of technological transformation so the student knows well how to solve the problem of commercialization.

Undergraduate students of Industrial Engineering teams were given hands-on, collaborative projects conducted with two incubation centers, such as the Technology Incubator Center from the Agency for the Assessment and Application of Technology (AAAT) from the government of Indonesia and the Centre of Excellence for Electrical Energy Storage Technology (CEfEEST) from Sebelas Maret University (UNS), Indonesia. After completing the project, students will develop a final project which will become the basis for evaluating the implementation of PBL. The basis for the assessment uses a rubric designed through three sub-assessments: curriculum planning, report and presentation. This research uses the paired t-test method to see the average difference between the two groups of PBL in pairs and compare based on assessment results.

Implementing PBL between the two incubation centers (AAAT and CEfEEST) based on paired t-tests for each rubric assessment indicator showed most of them were significantly related. The assessment result gives the alternative to design the proposed PBL from AAAT, CEfEEST and a blended scenario for technopreneur education in the future.

The experiences and findings presented can help future PBLs provide technopreneur education based on comparing and evaluating learning outcomes in both incubation centers. Thus, it can produce a better PBL design to encourage the success of technology commercialization.

The assessment of PBL on students' knowledge in technopreneur education by utilizing the paired t-test method to compare the assessment results of the final projects with the designed assessment rubric. This evaluation serves as the basis for comparing the effectiveness of PBL implementation between AAAT and CEfEEST.