Search results
1 – 10 of over 1000Elena Stefana, Paola Cocca, Federico Fantori, Filippo Marciano and Alessandro Marini
This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.
Abstract
Purpose
This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.
Design/methodology/approach
The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.
Findings
The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.
Originality/value
The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.
Details
Keywords
Marcello Braglia, Francesco Di Paco, Roberto Gabbrielli and Leonardo Marrazzini
This paper presents a new and well-structured framework that aims to assess the current environmental impact from a Greenhouse Gas (GHG) emissions perspective. This tool includes…
Abstract
Purpose
This paper presents a new and well-structured framework that aims to assess the current environmental impact from a Greenhouse Gas (GHG) emissions perspective. This tool includes a new set of Lean Key Performance Indicators (KPIs), which translates the well-known logic of Overall Equipment Effectiveness in the field of GHG emissions, that can progressively detect industrial losses that cause GHG emissions and support decision-making for implementing improvements.
Design/methodology/approach
The new metrics are presented with reference to two different perspectives: (1) to highlight the deviation of the current value of emissions from the target; (2) to adopt a diagnostic orientation not only to provide an assessment of current performance but also to search for the main causes of inefficiencies and to direct improvement implementations.
Findings
The proposed framework was applied to a major company operating in the plywood production sector. It identified emission-related losses at each stage of the production process, providing an overall performance evaluation of 53.1%. The industrial application shows how the indicators work in practice, and the framework as a whole, to assess GHG emissions related to industrial losses and to proper address improvement actions.
Originality/value
This paper scrutinizes a new set of Lean KPIs to assess the industrial losses causing GHG emissions and identifies some significant drawbacks. Then it proposes a new structure of losses and KPIs that not only quantify efficiency but also allow to identify viable countermeasures.
Details
Keywords
Shiyu Wan, Yisheng Liu, Grace Ding, Goran Runeson and Michael Er
This article aims to establish a dynamic Energy Performance Contract (EPC) risk allocation model for commercial buildings based on the theory of Incomplete Contract. The purpose…
Abstract
Purpose
This article aims to establish a dynamic Energy Performance Contract (EPC) risk allocation model for commercial buildings based on the theory of Incomplete Contract. The purpose is to fill the policy vacuum and allow stakeholders to manage risks in energy conservation management by EPCs to better adapt to climate change in the building sector.
Design/methodology/approach
The article chooses a qualitative research approach to depict the whole risk allocation picture of EPC projects and establish a dynamic EPC risk allocation model for commercial buildings in China. It starts with a comprehensive literature review on risks of EPCs. By modifying the theory of Incomplete Contract and adopting the so-called bow-tie model, a theoretical EPC risk allocation model is developed and verified by interview results. By discussing its application in the commercial building sector in China, an operational EPC three-stage risk allocation model is developed.
Findings
This study points out the contract incompleteness of the risk allocation for EPC projects and offered an operational method to guide practice. The reasonable risk allocation between building owners and Energy Service Companies can realize their bilateral targets on commercial building energy-saving benefits, which makes EPC more attractive for energy conservation.
Originality/value
Existing research focused mainly on static risk allocation. Less research was directed to the phased and dynamic risk allocation. This study developed a theoretical three-stage EPC risk allocation model, which provided the theoretical support for dynamic EPC risk allocation of EPC projects. By addressing the contract incompleteness of the risk allocation, an operational method is developed. This is a new approach to allocate risks for EPC projects in a dynamic and staged way.
Details
Keywords
Matthew Li, David Allinson and Kevin Lomas
The purpose of this paper is to identify the impact of traditionally unmonitored energy sources and sinks on assessment of the as-built thermal performance of occupied homes. The…
Abstract
Purpose
The purpose of this paper is to identify the impact of traditionally unmonitored energy sources and sinks on assessment of the as-built thermal performance of occupied homes. The analysis aims to demonstrate the potential scale of uncertainties introduced in a heat balance estimation of the heat transfer coefficient (HTC) when using in-use monitored data.
Design/methodology/approach
Energy flows for two UK homes – one a 1930s dwelling with high heat loss, the second a higher-performing 2014-built home – are predicted using the UK Government’s standard assessment procedure (SAP) and visualised using Sankey diagrams. Selected modelled energy flows are used as inputs in a quasi-steady state heat balance to calculate in-use HTCs as if from measured data sets gathered in occupied homes. The estimated in-use HTCs are compared against SAP-calculated values to illustrate the impact of including or omitting various heat sources and sinks.
Findings
The results demonstrate that for dwellings with low heat loss, the increased proportion of heating demand met by unmetered internal and solar gains informs a greater sensitivity of a heat balance estimation of the HTC to their omission. While simple quasi-steady state heat balance methods may be appropriate for dwellings with very high heat loss, alternative approaches are likely to be required for those with lower heat loss.
Originality/value
A need to understand the impacts of unmetered heat flows on the accuracy with which a building’s thermal performance may be inferred from in-use monitored data is identified: this paper illustrates the scale of these impacts for two homes at opposite ends of the energy performance scale.
Details
Keywords
Mohammed S. Al-kahtani, Lutful Karim and Nargis Khan
Designing an efficient routing protocol that opportunistically forwards data to the destination node through nearby sensor nodes or devices is significantly important for an…
Abstract
Designing an efficient routing protocol that opportunistically forwards data to the destination node through nearby sensor nodes or devices is significantly important for an effective incidence response and disaster recovery framework. Existing sensor routing protocols are mostly not effective in such disaster recovery applications as the networks are affected (destroyed or overused) in disasters such as earthquake, flood, Tsunami and wildfire. These protocols require a large number of message transmissions to reestablish the clusters and communications that is not energy efficient and result in packet loss. This paper introduces ODCR - an energy efficient and reliable opportunistic density clustered-based routing protocol for such emergency sensor applications. We perform simulation to measure the performance of ODCR protocol in terms of network energy consumptions, throughput and packet loss ratio. Simulation results demonstrate that the ODCR protocol is much better than the existing TEEN, LEACH and LORA protocols in term of these performance metrics.
Details
Keywords
Mohammed Jawad Abed and Anis Mhalla
The paper aims to present a grid-connected multi-inverter for solar photovoltaic (PV) systems to enhance reliability indices after selected the placement and level of PV solar.
Abstract
Purpose
The paper aims to present a grid-connected multi-inverter for solar photovoltaic (PV) systems to enhance reliability indices after selected the placement and level of PV solar.
Design/methodology/approach
In this study, the associated probability is calculated based on the solar power generation capacity levels and outages conditions. Then, based on this probability, dependability indices like average energy not supplied (AENS), expected energy not supplied and loss of load expectations (LOLE) are computed, also, another indices have been computed such as (customer average interruption duration index (CAIDI), system average interruption frequency index (SAIFI) and system average interruption duration index (SAIDI)) addressing by affected customers with distribution networks reliability assessment, including PV. On the basis of their dependability indices and active power flow, several PV solar modules installed in several places are analyzed. A mechanism for assessing the performance of the grid's integration of renewable energy sources is also under investigation.
Findings
The findings of this study based on data extracted form a PV power plant connected to the power network system in Diyala, Iraq 132 kV, attempts to identify the system's weakest points in order to improve the system's overall dependability. In addition, enhanced reliability indices are given for measuring solar PV systems performance connected to the grid and reviewed for the benefit of the customers.
Originality/value
The main contributions of this study are two methods for determining the reliability of PV generators taking into consideration the system component failure rates and the power electronic component defect rates in a PV system which depend on the power input and the power loss using electrical transient analysis program (ETAP) program.
Details
Keywords
Kamalakshi Dayal and Vandana Bassoo
The performance of Wireless Sensor Networks (WSNs) applications is bounded by the limited resources of battery-enabled Sensor Nodes (SNs), which include energy and computational…
Abstract
Purpose
The performance of Wireless Sensor Networks (WSNs) applications is bounded by the limited resources of battery-enabled Sensor Nodes (SNs), which include energy and computational power; the combination of which existing research seldom focuses on. Although bio-inspired algorithms provide a way to control energy usage by finding optimal routing paths, those which converge slower require even more computational power, which altogether degrades the overall lifetime of SNs.
Design/methodology/approach
Hence, two novel routing protocols are proposed using the Red-Deer Algorithm (RDA) in a WSN scenario, namely Horizontal PEG-RDA Equal Clustering and Horizontal PEG-RDA Unequal Clustering, to address the limited computational power of SNs. Clustering, data aggregation and multi-hop transmission are also integrated to improve energy usage. Unequal clustering is applied in the second protocol to mitigate the hotspot problem in Horizontal PEG-RDA Equal Clustering.
Findings
Comparisons with the well-founded Ant Colony Optimisation (ACO) algorithm reveal that RDA converges faster by 85 and 80% on average when the network size and node density are varied, respectively. Furthermore, 33% fewer packets are lost using the unequal clustering approach which also makes the network resilient to node failures. Improvements in terms of residual energy and overall network lifetime are also observed.
Originality/value
Proposal of a bio-inspired algorithm, namely the RDA to find optimal routing paths in WSN and to enhance convergence rate and execution time against the well-established ACO algorithm. Creation of a novel chain cluster-based routing protocol using RDA, named Horizontal PEG-RDA Equal Clustering. Design of an unequal clustering equivalent of the proposed Horizontal PEG-RDA Equal Clustering protocol to tackle the hotspot problem, which enhances residual energy and overall network lifetime, as well as minimises packet loss.
Details
Keywords
Oluwadamilola Esan, Nnamdi I. Nwulu, Love Opeyemi David and Omoseni Adepoju
This study aims to investigate the impact of the 2013 privatization of Nigeria’s energy sector on the technical performance of the Benin Electricity Distribution Company (BEDC…
Abstract
Purpose
This study aims to investigate the impact of the 2013 privatization of Nigeria’s energy sector on the technical performance of the Benin Electricity Distribution Company (BEDC) and its workforce.
Design/methodology/approach
This study used a questionnaire-based approach, and 196 participants were randomly selected. Analytical tools included standard deviation, Spearman rank correlation and regression analysis.
Findings
Before privatization, the energy sector, managed by the power holding company of Nigeria, suffered from inefficiencies in fault detection, response and billing. However, privatization improved resource utilization, replaced outdated transformers and increased operational efficiency. However, in spite of these improvements, BEDC faces challenges, including unstable voltage generation and inadequate staff welfare. This study also highlighted a lack of experience among the trained workforce in emerging electricity technologies such as the smart grid.
Research limitations/implications
This study’s focus on BEDC may limit its generalizability to other energy companies. It does not delve into energy sector privatization’s broader economic and policy implications.
Practical implications
The positive outcomes of privatization, such as improved resource utilization and infrastructure investment, emphasize the potential benefits of private ownership and management. However, voltage generation stability and staff welfare challenges call for targeted interventions. Recommendations include investing in voltage generation enhancement, smart grid infrastructure and implementing measures to enhance employee well-being through benefit plans.
Social implications
Energy sector enhancements hold positive social implications, uplifting living standards and bolstering electricity access for households and businesses.
Originality/value
This study contributes unique insights into privatization’s effects on BEDC, offering perspectives on preprivatization challenges and advancements. Practical recommendations aid BEDC and policymakers in boosting electricity distribution firms’ performance within the privatization context.
Details
Keywords
Tarig Zeinelabdeen Yousif Ahmed, Mawahib Eltayeb Ahmed, Quosay A. Ahmed and Asia Adlan Mohamed
The Gulf Cooperation Council (GCC) of countries has some of the highest electricity consumptions and carbon dioxide emissions per capita in the world. This poses a direct…
Abstract
Purpose
The Gulf Cooperation Council (GCC) of countries has some of the highest electricity consumptions and carbon dioxide emissions per capita in the world. This poses a direct challenge to the GCC government’s ability to meet their CO2 reduction targets. In this review paper the current household electricity consumption situation in the GCC is reviewed.
Design/methodology/approach
Three scenarios for reducing energy consumption and CO2 emissions are proposed and evaluated using strengths, weaknesses, opportunities and threats (SWOT) as well as the political, economic, social, technical, legal and environmental (PESTLE) frameworks.
Findings
The first scenario found that using solar Photovoltaic (PV) or hybrid solar PV and wind system to power household lighting could save significant amounts of energy, based on lighting making up between 8% to 30% of electricity consumption in GCC households. The second scenario considers replacement of conventional appliances with energy-efficient ones that use around 20% less energy. The third scenario looks at influencing consumer behavior towards sustainable energy consumption.
Practical implications
Pilot trials of these scenarios are recommended for a number of households. Then the results and feedback could be used to launch the schemes GCC-wide.
Social implications
The proposed scenarios are designed to encourage responsible electricity consumption and production within households (SDG12).
Originality/value
All three proposals are found viable for policymakers to implement. However, to ensure successful implementation GCC Governments are recommended to review all the opportunities and challenges associated with these schemes as laid out in this paper.
Details
Keywords
Vera Amicarelli, Christian Bux and Giovanni Lagioia
The purpose of this paper is to measure food loss and waste by material flow analysis (MFA) tool. Applying this methodology, the authors estimate wastage-related losses and…
Abstract
Purpose
The purpose of this paper is to measure food loss and waste by material flow analysis (MFA) tool. Applying this methodology, the authors estimate wastage-related losses and discuss opportunities for more circular and sustainable practices in the Italian potato industry.
Design/methodology/approach
MFA is applied to two specific typologies as follows: ready-to-eat (chips) and dried potato products produced in Italy. The analysis refers to the year 2017 as the complete dataset useful for this study includes measurements until this year. A bottom-up and top-down mixed approach is applied, and functional unit refers to 1 t of potatoes consumed as final product.
Findings
MFA is applied to quantify and qualify material balance associated with 1 t of potatoes consumed as final product. In Italy, in 2017, more than 22,000 t of fresh tubers were lost, including 3,500–4,800 t of starch, equivalent to 52,800–72,600 GJs. Moreover, fewer than 23,000 t of skins and scraps were produced within industrial plants, not available for food but suitable for animal feed (dry skins are an excellent carbohydrates source in cattle and poultry feed), starch industry and bioenergy production (biogas and/or bioethanol).
Originality/value
This research is one of the few studies proposing MFA methodology as a tool to measure food waste. This analysis shows its utility in terms of food waste quality/quantity evaluation, supporting both company management and policymakers.
Details