Search results

Recently, there has been a shift toward the embodied energy assessment of buildings. However, the impact of material service life on the life-cycle embodied energy has received little attention. We aimed to address this knowledge gap, particularly in the context of the UAE and investigated the embodied energy associated with the use of concrete and other materials commonly used in residential buildings in the hot desert climate of the UAE.

Using input–output based hybrid analysis, we quantified the life-cycle embodied energy of a villa in the UAE with over 50 years of building life using the average, minimum, and maximum material service life values. Mathematical calculations were performed using MS Excel, and a detailed bill of quantities with >170 building materials and components of the villa were used for investigation.

For the base case, the initial embodied energy was 57% (7390.5 GJ), whereas the recurrent embodied energy was 43% (5,690 GJ) of the life-cycle embodied energy based on average material service life values. The proportion of the recurrent embodied energy with minimum material service life values was increased to 68% of the life-cycle embodied energy, while it dropped to 15% with maximum material service life values.

The findings provide new data to guide building construction in the UAE and show that recurrent embodied energy contributes significantly to life-cycle energy demand. Further, the study of material service life variations provides deeper insights into future building material specifications and management considerations for building maintenance.

While previous studies have highlighted the importance of incorporating environmental sustainability in building designs, there is a paucity of studies that assess the extent to which design teams in developing countries consider environmental sustainability at the building design stage. Therefore, using Zambia as a case study, this study examined the extent to which infrastructure design teams in a developing country consider environmental sustainability at the design stage.

The study used a qualitative research approach using structured interviews because there are hardly any studies which have explored the extent to which designers incorporate environmental sustainability in infrastructure designs in developing countries. The data is analysed thematically using the ATLAS.ti software.

The results show that environmental sustainability is not an important design consideration because it is secondary to functional, technical and aesthetic considerations. Environmental considerations are also made in an ad hoc manner and when it is cost-effective for the project. Regulatory requirements pertaining to environmental protection are adhered to without any cost considerations. It was, therefore, theorised that building design teams in developing countries make technical, functional and aesthetic consideration during the infrastructure design stage ahead of environmental considerations.

There is a paucity of studies that have investigated whether building infrastructure designers consider issues of environmental sustainability at the design stage in developing countries. The findings have practical implications on how developing countries can foster environmental sustainability at the design stage and avoid generating a building infrastructure stock that will require environmental resilience adaptation in the future.

The purpose of this paper is to develop a blockchain-based data capture and transmission system that will collect real-time power consumption data from a household electrical appliance and transfer it securely to a local server for energy analytics such as forecasting.

The data capture system is composed of two current transformer (CT) sensors connected to two different electrical appliances. The CT sensors send the power readings to two Arduino microcontrollers which in turn connect to a Raspberry-Pi for aggregating the data. Blockchain is then enabled onto the Raspberry-Pi through a Java API so that the data are transmitted securely to a server. The server provides real-time visualization of the data as well as prediction using the multi-layer perceptron (MLP) and long short term memory (LSTM) algorithms.

The results for the blockchain analysis demonstrate that when the data readings are transmitted in smaller blocks, the security is much greater as compared with blocks of larger size. To assess the accuracy of the prediction algorithms data were collected for a 20 min interval to train the model and the algorithms were evaluated using the sliding window approach. The mean average percentage error (MAPE) was used to assess the accuracy of the algorithms and a MAPE of 1.62% and 1.99% was obtained for the LSTM and MLP algorithms, respectively.

A detailed performance analysis of the blockchain-based transmission model using time complexity, throughput and latency as well as energy forecasting has been performed.

Contemporary technological disruptions are espoused as though they stimulate sustainable growth in the built environment through the Green Internet of Things (G-IoT). Learning from discipline-specific experiences, this paper articulates recent advancements in the knowledge and concepts of G-IoT in relation to the construction and smart city sectors. It provides a scoping review for G-IoT as an overlooked dimension. Attention was paid to modern circularity, cleaner production and sustainability as key benefits of G-IoT adoption in line with the United Nations’ Sustainable Development Goals (UN-SDGs). In addition, this study also investigates the current application and adoption strategies of G-IoT.

This study uses the Preferred Reporting Items for Systematic and Meta-Analyses (PRISMA) review approach. Resources are drawn from Scopus and Web of Science repositories using apt search strings that reflect applications of G-IoT in the built environment in relation to construction management, urban planning, societies and infrastructure. Thematic analysis was used to analyze pertinent themes in the retrieved articles.

G-IoT is an overlooked dimension in construction and smart cities so far. Thirty-three scholarly articles were reviewed from a total of 82 articles retrieved, from which five themes were identified: G-IoT in buildings, computing, sustainability, waste management and tracking and monitoring. Among other applications, findings show that G-IoT is prominent in smart urban services, healthcare, traffic management, green computing, environmental protection, site safety and waste management. Applicable strategies to hasten adoption include raising awareness, financial incentives, dedicated work approaches, G-IoT technologies and purposeful capacity building among stakeholders. The future of G-IoT in construction and smart city research is in smart drones, building information modeling, digital twins, 3D printing, green computing, robotics and policies that incentivize adoption.

This study adds to the normative literature on envisioning potential strategies for adoption and the future of G-IoT in construction and smart cities as an overlooked dimension. No previous study to date has reviewed pertinent literature in this area, intending to investigate the current applications, adoption strategies and future direction of G-IoT in construction and smart cities. Researchers can expand on the current study by exploring the identified G-IoT applications and adoption strategies in detail, and practitioners can develop implementation policies, regulations and guidelines for holistic G-IoT adoption.

A positive outlook on the impact of Industry 4.0 (I4.0) on sustainability prevails in the literature. However, some studies have highlighted potential areas of concern that have not yet been systematically addressed. The goal of this study is to challenge the assumption of a sustainable Fourth Industrial Revolution by (1) identifying the possible unintended negative impacts of I4.0 technologies on sustainability; (2) highlighting the underlying motivations and potential actions to mitigate such impacts; and (3) developing and evaluating alternative assumptions on the impacts of I4.0 technologies on sustainability.

Building on a problematization approach, a systematic literature review was conducted to develop potential alternative assumptions about the negative impacts of I4.0 on sustainability. Then, a Delphi study was carried out with 43 experts from academia and practice to evaluate the alternative assumptions. Two rounds of data collection were performed until reaching the convergence or stability of the responses.

The results highlight various unintended negative effects on environmental and social aspects that challenge the literature. The reasons behind the high/low probability of occurrence, the severity of each impact in the next five years and corrective actions are also identified. Unintended negative environmental effects are less controversial than social effects and are therefore more likely to generate widely accepted theoretical propositions. Finally, the alternative hypothesis ground is partially accepted by the panel, indicating that the problematization process has effectively opened up new perspectives for analysis.

This study is one of the few to systematically problematize the assumptions of the I4.0 and sustainability literature, generating research propositions that reveal several avenues for future research.

The paper aims to describe the positive and negative effects of night lights in historical sites, as well as the most salient challenges faced by the visitors of these sites and determine ways to address them. The study aims to suggest several light-and-shadow approaches and designs to enhance the experience of visiting historical sites.

This study identifies problems of nightlife in historical sites with an online international questionnaire to determine the preferences and difficulties faced by visitors of historical sites during day and night. After that Egypt was determined as a sample case of a developing country; its archaeological sites need to be improved. The main problems of historical Egyptian sites were investigated and approaches in developing historical sites with interactive lighting design were presented after an online questionnaire to the Egyptian society.

The paper shows that archaeological sites need some development, especially in their technological and lighting aspects, to overcome visitors’ low night-time interest in archaeological sites. Research has found certain limitations in the effects of constructing artificial illumination. The study provides modern sustainable solution for some light challenges in historical sites with approaches and solutions to solve it.

The results of that research could be applied in developing countries, but with larger specific studies to the historical urban locations according to the politics of the country.

The paper includes sustainable approaches in developing historical sites with technological lighting design required to enhance historical sites at night-time and make visits more interactive and interesting.

This paper presents an identified need of historical sites visitors’ to study applying modern approaches in enhancing urban historical sites.

This systematic literature review investigates the contribution of design thinking (DT) as a process and tool to drive innovation in a sustainable built environment (SBE) and develops a new model for sustainability research integrating DT and future thinking approaches toward achieving a unified DT and foresight notion for future research and applications.

This review was based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Open-access English articles published between 2000 and 2022 identified using the EBSCOhost, Emerald Insight, DOJA, JSTOR, Scopus and Taylor and Francis database searches were reviewed. The review framework deploys a previously proposed modified Ansoff matrix with an integrated innovation matrix to identify and analyze the challenges and opportunities for innovation growth in SBE. Additionally, a citation analysis was conducted to explore the impact of DT for innovation in SBE, and a proposed framework based on design by drawing on foresight theory was developed.

Research on DT for innovation in SBE faces the challenge of unanticipated impacts. According to the average number of citations per document, innovation associated with new solutions within a new context seems to become highly influential. Additionally, research gaps exist in the integration of foresight and DT into sustainability research to identify new contexts and solutions to SBE. A model of foresight design thinking (FDT) is proposed to guide future research and support the practical application of DT in sustainability.

This analysis was limited by the selection criteria as only certain keywords were used and English-only articles were selected. Future research should consider the use of DT for innovation in SBE using various important keywords, which would improve research findings and expand the contribution of DT to SBE.

The FDT model offers a new holistic framework for the iterative process of reframing and reperception, focusing on divergent and convergent thinking with the goal of contributing to SBE practices.

The integrated framework of DT and foresight can contribute to the study and development of sustainable innovation and a strategic shift toward a sustainable society.

The integration of DT, foresight and sustainability can broaden the horizons of sustainability research by systematically addressing future challenges related to SBE, which can be translated into feasible and innovative solutions. Thus, the FDT model complements the application of DT in sustainable innovation in this research field.

Digital twin (DT) and building information modeling (BIM) are interconnected in some ways. However, there has been some misconception about how DT differs from BIM. As a result, industry professionals reject DT even in BIM-based construction projects due to reluctance to innovate. Furthermore, researchers have repeatedly developed tools and techniques with the same goals using DT and BIM to assist practitioners in construction projects. Therefore, this study aims to assist industry professionals and researchers in understanding the relationship between DT and BIM and synthesize existing works on DT and BIM.

A systematic review was conducted on published articles related to DT and BIM. A total record of 54 journal articles were identified and analyzed.

The analysis of the selected journal articles revealed four types of relationships between DT and BIM: BIM is a subset of DT, DT is a subset of BIM, BIM is DT, and no relationship between BIM and DT. The existing research on DT and BIM in construction projects targets improvements in five areas: planning, design, construction, operations and maintenance, and decommissioning. In addition, several areas have emerged, such as developing geo-referencing approaches for infrastructure projects, applying the proposed methodology to other construction geometries and creating 3D visualization using color schemes.

This study contributed to the existing body of knowledge by overviewing existing research related to DT and BIM in construction projects. Also, it reveals research gaps in the body of knowledge to point out directions for future research.

This paper proposes an Information and Communication Technology (ICT) platform to increase the sustainability and resilience of smallholders to face supply chain disruptions in the event of COVID-like crises. The platform facilitates interactions between smallholders and buyers, workers and freight transport companies in agri-food ecosystems. Furthermore, this research work presents the implementation of the freight transport companies’ platform module.

The research work begins with a literature review aiming at analyzing current available ICT solutions supporting smallholders and other actors in the agri-food supply chain. This analysis identifies the research gaps which have to be filled by the platform. Then, the authors proceed with the analysis of the operational scenarios of each platform actor by interacting with experts and operators working in the agri-food sector. The results of such analysis resulted in a comprehensive, unambiguous and consistent set of specification being used to define the platform structure and modules architecture. The platform modules have been developed by using the web-application framework Laravel.

Preliminary tests show that the proposed platform is usable and promises to improve the resilience and economic, social and environmental sustainability of agri-food supply chains, with a focus on smallholders.

The research work allows players in the agri-food supply chain and in particular small local producers to react and mitigate the impact of COVID-like crises through development of a platform in which smallholders, citizens (buyers and workers) and freight transport companies are simultaneously present.

There is a renowned interest in adaptability as an important principle for achieving circularity in the built environment. Circular building adaptability (CBA) could enable long-term building utilisation and flexible use of space with limited material flows. This paper identifies and analyses design strategies facilitating CBA to propose a framework for enhancing the implementation of the concept.

Interviews were conducted with professionals experienced in circular building design to explore the questions “How do currently applied design strategies enable CBA?” and “How can CBA be implemented through a conceptual design framework?”. The interviews encircled multi-residential building examples to identify currently applied circular design strategies. The interviews were analysed through qualitative content analysis using CBA determinants as a coding framework.

The results show that all ten CBA determinants are supported by design strategies applied in current circular building design. However, some determinants are more supported than others, and design strategies are often employed without explicitly considering adaptability. The design strategies that enable adaptability offer long-term solutions requiring large-scale modifications rather than facilitating low-impact adaptation by dwelling occupants. The proposed conceptual design framework could aid architects in resolving these issues and implementing CBA in their circular building design.

This paper’s contribution to CBA is threefold. It demonstrates design strategies facilitating CBA, proposes a conceptual design framework to apply the concept and identifies the need for a more comprehensive application of available adaptability strategies.