Search results

Renewable energy is at the forefront of countries’ concerns due to its global economic and environmental impacts. Previous studies have thoroughly examined the impact of renewable energy on overall national income, and this paper aims to shed light on an indicator that has received insufficient attention in research regarding its impact on economic growth, using data from 2000 to 2018.

This study examines the causal relationship between trade balance, renewable energy consumption and CO₂ emissions per capita in Organization for Economic Cooperation and Development (OECD) countries using an auto regression distributed lag model (ARDL) and Johansen Cointegration Test.

The findings reveal that there is evidence of a long-run and short-run cointegrating relationship and that renewable energy consumption in the long run impacts the trade balance positively and in the short run negatively.

Therefore, bioenergy trade between countries and local investment should be prioritized to increase the trade balance surplus, since many of OECD countries suffer from deficit problems.

This study aims to investigate the intricate relationships between a community energy system, water resources and biodiversity conservation, with a specific focus on augmenting community energy resilience in Bondo. The primary objective is to gain an in-depth understanding of how community members perceive and experience the challenges related to balancing the often-conflicting demands of energy, water and biodiversity conservation within this context.

The research uses a qualitative approach to unravel the multifaceted dynamics of community energy systems, water resources and biodiversity conservation in Bondo. Data were collected through focus groups and direct observations, enabling a nuanced exploration of community perspectives and lived experiences. The subsequent analysis of this qualitative data follows established thematic analysis procedures.

The study's findings shed light on the formidable barriers that impede rural communities in Malawi from accessing electricity effectively. Even in communities fortunate enough to have electricity connections, the lack of knowledge regarding productive electricity use results in community energy systems operating at significantly reduced load factors. Furthermore, the intricate challenge of managing a biodiversity hotspot persists, exacerbated by the densely populated peripheral communities' continued reliance on forest, land and water resources. These activities, in turn, contribute to ecosystem degradation.

In a context where government-led management of forest reserves and game reserves has not yielded the expected results due to a multitude of factors, there arises a compelling need for innovative approaches. One such innovation involves fostering partnerships between the government and experienced trusts as lead organisations, providing a fresh perspective on addressing the complex interplay between community energy systems, water resources and biodiversity conservation. This novel approach opens doors to explore alternative pathways for achieving the delicate balance between human energy needs and the preservation of vital ecosystems.

This paper aims to develop a selective energy optimisation of the photovoltaic–thermal (PV/T) system performance. The PV cell inside the PV/T system could be periodically manipulated to produce domestic hot water without applying an external power supply.

A numerical simulation model of the proposed PV/T model was developed in MATLAB/Simulink to analyse the selective energy optimisation of the model. The extrinsic cell resistance (R_se) is adjusted to control the ratio of thermal to the electrical energy, generated from the PV cell inside the PV/T system. Therefore, the internal heat of the PV cell inside the PV/T system is periodically used as a thermal element to produce electrical power and hot water.

The optimisation of PV/T energy shows that the electrical power efficiency can increase by 11.6% when R_se was 0 Ω, and the 200 L water tank temperature increased by 22ºC when R_se was 50 Ω.

This study showed that the use of the PV cell could be extended to domestic hot water and space heating, and not only for electricity.

Background/Objectives: Protein-based meal replacements (MR) with viscous soluble fibre are known aids for weight loss. This study aims to compare the effects of new whey and vegan MR containing different amounts of PGX (PolyGlycopleX) on weight loss over 12 weeks, along with a calorie-restricted diet.

Subjects/Methods: Sixty-eight healthy adults of both sexes (53 women; 15 men; average age 47.1 years; BMI 31 ± 7.1 kg/m² and weight 85.05 ± 23.3 kg) were recruited. Participants consumed a whey or vegan MR twice/d (5–10 g/day PGX) with a low-energy diet (1,200 kcal/day), over 12 weeks. Weight, height, waist and hip circumference were recorded (four time periods).

Results: Forty-four participants completed the study. Results showed significant reductions in average body weight and at week 12, whey group was [−7.7 kg ± 0.9 (8.3%), p < 0.001] and vegan group was [−4.5 kg ± 0.8 (6.2%), p < 0.001)]. All participants (n = 44; BMI 27 to 33 kg/m²) achieved significant reductions in body measurements from baseline to week 12; p < 0.001. Conclusions: Supplementation of protein-based MR with PGX and a balanced, low-energy diet, appears to be an effective approach for short-term weight loss.

As the authors were evaluating if the MR as a whole (i.e. with PGX) caused weight loss from baseline over the 12 weeks, no comparators, i.e. just the MR without PGX, were used. Formulation of these new MRs resulted in a whey product with 5 g PGX and a vegan product with 2.5 g PGX. Only 2.5 g PGX could be formulated with the vegan protein due to taste and viscosity limitations. Study participants were not randomized and no control groups (e.g. no MR or MR without PGX but with energy restricted diet) were used. Furthermore, it is not clear whether the sort of protein alone or the combination with a higher amount of PGX (whey with 5 g PGX/serving vs vegan with 2.5 g PGX/serving) has contributed to these significant greater weight-loss effects. This was something the authors were testing, i.e. could only 2.5 g PGX/serving have an effect on weight loss for a vegan MR. These limitations would be somethings to evaluate in a subsequent randomized controlled study. Hence, the results of this study may serve as a good starting point for further sophisticated randomized controlled trials that can demonstrate causality – which the authors acknowledge as one of the fundamental limitations of an observational study design. Participants tracked their calories but adherence and compliance were self-assessed and they were encouraged to keep their exercise routine consistent throughout the study. Hence, these are further limitations. No control group was used in this study to observe the effect of the dietary intervention and/or physical activity on weight loss alone. However, a goal of the authors was to keep this study as close to a real-life situation as possible, where people would not be doing any of these measurements, to see if with minimal supervision or intervention, people can still lose weight and alter their body composition. Furthermore, differences in gender and the corresponding weight loss effects in response to MR-protein-based treatments could be evaluated in follow-up studies.

This study indicates that the consumption of protein-based (animal, whey or plant, pea protein) MR incorporating the highly soluble viscous PGX is beneficial for weight loss when combined with a healthy-balanced, calorie-restricted diet. MRs at either 2.5 g or 5 g per serving (RealEasy^TM with PGX) proved to be a highly effective as a short-term solution for weight loss. The observed results are encouraging, however, further long-term studies (i.e. randomized clinical trials RCT) are needed to confirm the clinical relevance. RCTs should focus on the individual effects of PGX and/or the different protein sources used in MRs, on weight loss and the maintenance of the reduced body weight, and should measure detailed blood parameters (lipid profiles, glucose etc.) as well as collect detailed exercise and food consumption diaries.

To the authors’ knowledge, this is the first study comparing a whey versus vegan, (as pea) protein-based MR that is supplemented with fibre PGX; thus, this work adds information to the already existing literature on fibre (such as PGX) and MRs regarding their combined weight loss effects. The purpose of this study was to observe if the novel protein-based (either whey or vegan versions) MR RealEasy^TM with PGX at 2.5 or 5 g in addition to a calorie-restricted diet (total of 1,200 kcal/day) would aid in weight loss in individuals over a 12-weeks period. Adding increasing amounts of whey protein and soluble fibre can help reduce subsequent ad libitum energy intake which could help adherence to energy restricted diets, but whether similar effects are seen with vegan protein is unclear – this study does aim to address this.

This study aims to focus on understanding how different jet angles and Reynolds numbers influence the phase change materials’ (PCMs) melting process and their capacity to store energy. This approach is intended to offer novel insights into enhancing thermal energy storage systems, particularly for applications where heat transfer efficiency and energy storage are critical.

The research involved an experimental and numerical analysis of PCM with a melting temperature range of 22 °C–26°C under various conditions. Three different jet angles (45°, 90° and 135°) and two container angles (45° and 90°) were tested. Additionally, two different Reynolds numbers (2,235 and 4,470) were used to explore the effects of jet outlet velocities on PCM melting behaviour. The study used a circular container and analysed the melting process using the hot air inclined jet impingement (HAIJI) method.

The obtained results showed that the average temperature for the last time step at Ф = 90° and Re = 4,470 is 6.26% higher for Ф = 135° and 14.23% higher for Ф = 90° compared with the 45° jet angle. It is also observed that the jet angle, especially for Ф = 90°, is a much more important factor in energy storage than the Reynolds number. In other words, the jet angle can be used as a passive control parameter for energy storage.

This study offers a novel perspective on the effective storage of waste heat transferred with air, such as exhaust gases. It provides valuable insights into the role of jet inclination angles and Reynolds numbers in optimizing the melting and energy storage performance of PCMs, which can be crucial for enhancing the efficiency of thermal energy storage systems.

This paper proposes an intact framework for building life cycle energy estimation (LCEE), which includes three major energy sources: embodied, operational and mobile.

A systematic review is conducted to summarize the selected 109 studies published during 2012–2021 related to quantifying building energy consumption and its major estimation methodologies, tools and key influence parameters of three energy sources.

Results show that the method limitations and the variety of potential parameters lead to significant energy estimation errors. An in-depth qualitative discussion is conducted to identify research knowledge gaps and future directions.

With societies and economies developing rapidly across the world, a large amount of energy is consumed at an alarming rate. Unfortunately, its huge environmental impacts have forced many countries to take energy issues as urgent social problems to be solved. Even though the construction industry, as the one of most important carbon contributors, has been constantly and academically active, researchers still have not arrived at a clear consensus for system boundaries of life cycle energy. Besides, there is a significant difference between the actual and estimated values in countless current and advanced energy estimation approaches in the literature.

A few earlier studies presented infeasible heatline trajectories for natural convection within annular domains involving an inner circular cylinder and outer square/circular enclosure. The purpose of this paper is to revisit and illustrate the correct heatline trajectories for various test cases.

Galerkin finite element based methodology and space adaptive grid have been used to simulate natural convective flows within the annular domains. The prediction of heatlines involves derivatives at the nodes, which are evaluated based on finite element basis functions and contributions from neighboring elements.

The heatlines in the earlier work indicate infeasible heat flow paths such as heat flow from one portion to the other of isothermal hot walls and heat flow across the adiabatic walls. Current results illustrate physically consistent heat flow paths involving perpendicularly emerging heatlines from hot to cold walls for conductive transport, long heat flow paths around the closed-loop heatline cells for convective transport and parallel layout of heatlines to the adiabatic walls. Results also demonstrate complex heatlines involving multiple flow vortices and complex flow structures.

Current work translates heatfunctions from energy flux vectors, which are determined by using basis sets. This work demonstrates the expected heatline trajectories for various scenarios involving conductive and convective heat transport within enclosures with an inner hot object as a first attempt, and the results are precursors for the understanding of energy flow estimates.

Privacy preservation is a significant concern in Internet of Things (IoT)-enabled event-driven wireless sensor networks (WSNs). Low energy utilization in the event-driven system is essential if events do not happen. When events occur, IoT-enabled sensor network is required to deal with enormous traffic from the concentration of demand data delivery. This paper aims to explore an effective framework for safeguarding privacy at source in event-driven WSNs.

This paper discusses three algorithms in IoT-enabled event-driven WSNs: source location privacy for event detection (SLP_ED), chessboard alteration pattern (SLP_ED_CBA) and grid-based source location privacy (GB_SLP). Performance evaluation is done using simulation results and security analysis of the proposed scheme.

The sensors observe bound events or sensitive items within the network area in the field of interest. The open wireless channel lets an opponent search traffic designs, trace back and reach the start node or the event-detecting node. SLP_ED and SLP_ED_CBA provide better safety level results than dynamic shortest path scheme and energy-efficient source location privacy protection schemes. This paper discusses security analysis for the GB_SLP. Comparative analysis shows that the proposed scheme is more efficient on safety level than existing techniques.

The authors develop the privacy protection scheme in IoT-enabled event-driven WSNs. There are two categories of occurrences: nominal events and critical events. The choice of the route from source to sink relies on the two types of events: nominal or critical; the privacy level required for an event; and the energy consumption needed for the event. In addition, phantom node selection scheme is designed for source location privacy.

The extent to which sustainability is integrated into conventional accounting practices, in the light of a more integrated thinking perspective, requires further exploration. This paper aims to investigate how management control systems (MCSs) and sustainability-specific control systems (SCSs) are mobilised and how they interact to support the environmental sustainability strategy of a small- and medium-sized entity (SME).

Through a case study in a waste disposal firm, this paper examines the influence of cognitive, organisational and technical factors on the interaction and integration of MCSs and SCSs to bolster an environmental sustainability strategy.

The MCSs that are mobilised vary according to the type of strategy that is pursued. Even though the technical integration of MCSs with SCSs was not achieved, interaction between them supported strategic decision-making and the pursuit of environmental performance in the light of a more integrated thinking perspective. The role of multidisciplinary teams formed by accountants and environmental scientists to support sustainability management control at the SME also enabled interaction and provided steps for integrated thinking.

Although based on single case study, this research offers practitioners useful knowledge about the potential levers and obstacles relating to the mobilisation of MCSs when a sustainability strategy is conceived and its impact on the development of integrated thinking.

The paper provides insight into how SMEs can mobilise their MCSs to support an environmental sustainability strategy, shedding light on the factors that enhance interaction among MCSs and SCSs.

The human service triad (i.e. the relationship between the customer, frontline employee (FLE) and managerial employee) experiences a range of well-being challenges when faced with the introduction of service robots. Despite growth in service robot scholarship, understanding of the well-being challenges affecting the human service triad remains fragmented. Hence, the purpose of this paper is to synthesise the literature and offer a research agenda aligned with the proposed Robotic-Human Service Trilemma. By taking a job performance approach (which considers the actions, behaviours and outcomes linked to organisational goals), the Robotic-Human Service Trilemma conceptualises three well-being challenges (intrusion, sideline and interchange). These challenges are realised via the realistic capabilities and constraints of service robot implementation.

This research relies on a systematic review of all disciplines concerning service robots. In total, 82 articles were analysed using thematic coding and led to the development of the Robotic-Human Service Trilemma and research agenda.

The analyses reveal the Robotic-Human Service Trilemma consists of three challenges: intrusion, sideline and indifference. The findings demonstrate that FLEs are required to counterbalance the constraints of service robots, leading to an uneven well-being burden within the human service triad. This paper suggests a research agenda for investigation of the challenges that underpin the Robotic-Human Service Trilemma.

Through the conceptualisation of the Robotic-Human Service Trilemma, this study is the first to explore how states of well-being equilibrium exist within the human service triad and how these states are challenged by service robots. The authors present a balanced centricity perspective to well-being that contrasts previous trade-off approaches and that enhances the body of service robot literature with a well-being lens.