Search results

The purpose of this paper is to define the integration capability dimensions and create a model for self-assessing the integration capability in inter-organizational projects.

A theoretical construct of, referred in this study as integration capability framework is elaborated following a systematic literature review. Thereafter, an integration capability self-assessment model, based on maturity thinking, is derived from the theoretical framework. The self-assessment model is further developed and tested for validity within five inter-organizational project networks in cooperation with industry practitioners, representing construction, industrial engineering, and mining sectors.

The results show that inter-organizational projects can use the developed model in self-assessing the maturity levels of various integration mechanisms, thus the state of integration capability at any point in time during inter-organizational projects.

This study is an attempt to identify how the integration capability dimensions can be self-assessed in inter-organizational projects, through the maturity levels of various integration mechanisms. The results offer insights for both academics and project management practitioners.

This paper aims to perform thermal and mechanical characterization for silver-based sintered thermal joints. Layer quality affects thermal and mechanical performance, and it is important to achieve information about how materials and process parameters influence them.

Thermal investigation of the thermal joints analysis method was focused on determination of thermal resistance, where temperature measurements were performed using infrared camera. They were performed in two modes: steady-state analysis and dynamic analysis. Mechanical analysis based on measurements of mechanical shear force. Additional characterizations based on X-ray image analysis (image thresholding), optical microscope of polished cross-section and scanning electron microscope image analysis were proposed.

Sample surface modification affects thermal resistance. Silver metallization exhibits the lowest thermal resistance and the highest mechanical strength compared to the pure Si surface. The type of dynamic analysis affects the results of the thermal resistance.

Investigation of the layer quality influence on mechanical and thermal performance provided information about different joint types.

The purpose of the article is to assess the effectiveness, compliance, adoption and lessons learnt from the pilot implementation of a data integration solution between an acute care hospital information system (HIS) and a long-term care (LTC) home electronic medical record through a case report.

Utilization statistics of the data integration solution were captured at one-month post implementation and again one year later for both the emergency department (ED) and LTC home. Clinician feedback from surveys and structured interviews was obtained from ED physicians and a multidisciplinary LTC group.

The authors successfully exchanged health information between a HIS and the electronic medical record (EMR) of an LTC facility in Canada. Perceived time savings were acknowledged by ED physicians, and actual time savings as high as 45 min were reported by LTC staff when completing medication reconciliation. Barriers to adoption included awareness, training efficacy and delivery models, workflow integration within existing practice and the limited number of facilities participating in the pilot. Future direction includes broader staff involvement, expanding the number of sites and re-evaluating impacts.

A data integration solution to exchange clinical information can make patient transfers more efficient, reduce data transcription errors, and improve the visibility of essential patient information across the continuum of care.

Although there has been a large effort to integrate health data across care levels in the United States and internationally, the groundwork for such integrations between interoperable systems has only just begun in Canada. The implementation of the integration between an enterprise LTC electronic medical record system and an HIS described herein is the first of its kind in Canada. Benefits and lessons learnt from this pilot will be useful for further hospital-to-LTC home interoperability work.

This paper presents the concerns in manufacturing supply chain. Further this study investigates the role of information technology (IT) and information sharing (IS) in manufacturing supply chain and determines its impact towards supply chain integration (SCI), supply chain performance (SCP), and manufacturing firm performance (FP) in Malaysia. The theoretical framework was proposed for the study on the basis of existing literature. The study administered a survey questionnaire to collect data from manufacturing firms in Malaysia with 112 respondents. A multiple regression analysis is conducted to establish the relationship between IT, IS, SCI, and FP. The study finds that IT and sharing has significant positive effect towards and performance. Firms that use IT and practice IS across partners in the supply chain are more likely to integrate their internal and external value chain for better performance both within and across the manufacturing firms in the supply chain. This study can be of interest to the manufacturing industry as well as other industry practitioners interested in improving the performance of the organization and supply chain in total. For supply chain practitioners, this results indicate that the firms should adopt IT and IS practices to strategically improve SCI. This in turn will also improve the supply chain network and firm’s performance. This study employs a newly developed framework which depicts the causal relationship between IT, IS, SCI, Supply Chain Performance, and FP in Malaysia. Furthermore, it closes a gap in existing literature by examining the effect IT and communication (ICT) practices toward manufacturing firms’ performance and SCP in a single setting. In addition, the current study attempted to construct a model which would estimate and interpret SCP and FP simultaneously, and to evaluate this model in an empirical fashion.

This study aims to explore how to apply and integrate the performance management (PM) process in humanitarian supply chains (HSCs) among and between humanitarian organizations (HOs) and donors so as to improve cost-efficiency (CE) and lead-time effectiveness (LTE) in the stage of natural disaster preparedness.

This study adapts and operationalizes a framework for the PM process used in commercial supply chains to assess HSCs. A multiple-case study with two types of actors – six HOs and three donors—is used to describe the applications of the PM process and analyze the level of integration between the actors.

The activities in the PM process could sometimes be only vaguely described. Both actors emphasized improving CE, with less emphasis on LTE. Both actors have a low level of integration in each PM process activity, decreasing the CE and LTE. Therefore, guidelines for improving the level of PM process integration are provided.

To the best of the authors’ knowledge, this study is one of the first to combine literature on HSCs and PM process integration, thereby contributing to both literature fields. The concrete contribution of this study is a framework for PM process application and integration among and between HOs and donors.

The PM process framework can be used to assess PM process application, as well as current and increased level of integration, to improve CE and LTE. The current applications can also inspire other HOs and donors.

Previous studies indicate the lack of frameworks in the PM domain of HSCs, especially in the stage of natural disaster preparedness.

This study aims to find out how the e-records management subject has been researched and tackled by researchers in the Eastern and Southern African Regional Branch of the International Council on Archives (ESARBICA).

This research paper applied a bibliometric survey, where a quantitative survey of the literature pertaining to the study of e-records management in the ESARBICA region, covering the period from 2000 to 2016, was conducted applying bibliometric methods. The survey aimed at providing descriptive data that cast a spotlight on the features and development of the e-records management base literature in the ESARBICA region.

The research data display a lamentable outlook in the contribution to the electronic records management body of knowledge from the ESARBICA region. Few research articles from professionals in the records and archives management are being published. These figures call for increased investments in electronic records management research by institutions in ESARBICA, as management of electronic content has become the centre of political and socio-economic development. Follow-up studies need to be done to counter limitations placed on this research paper. The findings show that there is under production of research publications in the ESARBICA region. The region only contributed 2 per cent of the total world output in the period under review and in the study of electronic records management from journals indexed by Scopus.

A bibliometric study places researchers at the mercy of analysing incomplete information due to limitations of resources. The variance in use of terminology (key words) by authors in published research articles may entail some being left out in an analysis of articles the same subject matter. As much as due diligence was placed on using Boolean search methods to counter such limitations they are unavoidable. An interpretation of bibliometric or citation analysis research is subjective as some analysts may label results incomplete or unreliable; hence, this paper finds itself in the same predicament. Inability to access the Thompson Reuters Web of Science database left the authors with Scopus as the only option, as Google Scholar was overlooked due to difficulties of having to rely on third-party software for analysing its indexed content that are mostly inaccurate and or ambiguous.

The findings of this study help uncover areas in e-records management, which have been researched over the years, and identify the prominent e-records management researchers in the ESARBICA region.

A number of bibliometric studies have been conducted; however, none has been conducted to establish e-records management research trends in the ESRABICA region.

The study explores how Taiwan’s electronic health data systems can be used to build algorithms that reduce or eliminate medical errors and to advance precision medicine.

This study is a narrative review of the literature.

The body of medical knowledge has grown far too large for human clinicians to parse. In theory, electronic health records could augment clinical decision-making with electronic clinical decision support systems (CDSSs). However, computer scientists and clinicians have made remarkably little progress in building CDSSs, because health data tend to be siloed across many different systems that are not interoperable and cannot be linked using common identifiers. As a result, medicine in the USA is often practiced inconsistently with poor adherence to the best preventive and clinical practices. Poor information technology infrastructure contributes to medical errors and waste, resulting in suboptimal care and tens of thousands of premature deaths every year. Taiwan’s national health system, in contrast, is underpinned by a coordinated system of electronic data systems but remains underutilized. In this paper, the authors present a theoretical path toward developing artificial intelligence (AI)-driven CDSS systems using Taiwan’s National Health Insurance Research Database. Such a system could in theory not only optimize care and prevent clinical errors but also empower patients to track their progress in achieving their personal health goals.

While research teams have previously built AI systems with limited applications, this study provides a framework for building global AI-based CDSS systems using one of the world’s few unified electronic health data systems.

This paper investigates the development of efficiency and the progress of banking integration in the European Union by checking for convergence among banks of European and Eurozone countries as well as contrasting the results with those of United States banks.

Initially, we employ the two-stage semi-parametric double bootstrap DEA method, which absorbs the effects of possible integration barriers in the measurement of efficiency. Afterwards, we apply a panel data model, in order to investigate the process of banking integration by testing for convergence and for convergent clusters in banking efficiency.

Our main findings show that the bank efficiency of the US is considerably higher than that of the Eurozone and the European Union. Although there is no evidence of convergence across the banking groups, our results indicate the presence of club convergence. We also conclude that the US banking system is closer to convergence than the Eurozone and the European Union banks. Nevertheless, this outcome is subject to change in the future due to the fact that Eurozone and European Union banks' speed of convergence is higher than that of US banks.

Our survey is unique in trying to check for convergence while controlling for country-specific and bank-specific factors that affect the efficiency of European and Eurozone banks. Moreover, recent literature does not compare the convergence of efficiency of Eurozone, European and US banking. Finally, in our paper special consideration was given to the comparison of commercial, cooperative and savings banks, as subsets of our banking groups.

The primary objective of this paper is to show a systematic and methodological approach for the digitalization of critical clinical pathways (CPs) within the healthcare domain.

The methodology entails the integration of service design (SD) and action research (AR) methodologies, characterized by iterative phases that systematically alternate between action and reflective processes, fostering cycles of change and learning. Within this framework, stakeholders are engaged through semi-structured interviews, while the existing and envisioned processes are delineated and represented using BPMN 2.0. These methodological steps emphasize the development of an autonomous, patient-centric web application alongside the implementation of an adaptable and patient-oriented scheduling system. Also, business processes simulation is employed to measure key performance indicators of processes and test for potential improvements. This method is implemented in the context of the CP addressing transient loss of consciousness (TLOC), within a publicly funded hospital setting.

The methodology integrating SD and AR enables the detection of pivotal bottlenecks within diagnostic CPs and proposes optimal corrective measures to ensure uninterrupted patient care, all the while advancing the digitalization of diagnostic CP management. This study contributes to theoretical discussions by emphasizing the criticality of process optimization, the transformative potential of digitalization in healthcare and the paramount importance of user-centric design principles, and offers valuable insights into healthcare management implications.

The study’s relevance lies in its ability to enhance healthcare practices without necessitating disruptive and resource-intensive process overhauls. This pragmatic approach aligns with the imperative for healthcare organizations to improve their operations efficiently and cost-effectively, making the study’s findings relevant.

The purpose of this paper is to review possibilities of implementing ceramic additive manufacturing (AM) into electronic device production, which can enable great new possibilities.

A short introduction into additive techniques is included, as well as primary characterization of structuring capabilities, dielectric performance and applicability in the electronic manufacturing process.

Ceramic stereolithography (SLA) is suitable for microchannel manufacturing, even using a relatively inexpensive system. This method is suitable for implementation into the electronic manufacturing process; however, a search for better materials is desired, especially for improved dielectric parameters, lowered sintering temperature and decreased porosity.

Relatively inexpensive ceramic SLA, which is now available, could make ceramic electronics, currently restricted to specific applications, more available.

Ceramic AM is in the beginning phase of implementation in electronic technology, and only a few reports are currently available, the most significant of which is mentioned in this paper.