Search results

This study investigates how media brand knowledge, defined as a structural feature of the message, influences emotional and attentional responses to, and memory of, news messages.

Self-reports, facial electromyography (EMG) and electroencephalography were used as indices of emotional valence, arousal and attention in response to 42 news messages, which varied along the valence and involvement dimensions and were framed with different media brands varying along the familiarity and credibility dimensions.

Compared to the no-brand condition, news framed with brands elicited more attention. The memory tests indicated that strong media brands override the effect of involvement in information encoding, whereas details of news presented with Facebook were not well encoded. However, the headlines of news framed with Facebook were well retrieved. In addition, negative and high-involvement news elicited higher arousal ratings and corrugator EMG activity. News framed with familiar and high-credibility brands elicited higher arousal ratings.

Relevant for both brand managers and audiences, the findings show that building credibility and familiarity both work as brand attributes to differentiate media brands and influence information processing.

The results highlight the importance of media brands in news reading: as a structural feature, the brand is used as a proxy to process the message content. The study contributes by investigating how the type of source influences the reception and encoding of the mediated information; by investigating the emotional effects of brands; and by confirming previous findings in media psychology literature.

This chapter provides an overview of the Department of Defense (DoD) laboratory structure to help equipment designers, modelers, and manufacturers determine where research, testing programs, or relevant findings can be found. The chapter includes a discussion of the performance measures and metrics typically used in DoD laboratories and concludes by considering the current state-of-the-art as well as the state-of-the-possible for human performance measurement.

To compare the electromyography (EMG) features during physical and imagined standing up in healthy young adults.

Twenty-two participants (ages ranged from 20–29 years old) were recruited to participate in this study. Electrodes were attached to the rectus femoris, biceps femoris, tibialis anterior and the medial gastrocnemius muscles of both sides to monitor the EMG features during physical and imagined standing up. The %maximal voluntary contraction (%MVC), onset and duration were calculated.

The onset and duration of each muscle of both sides had no statistically significant differences between physical and imagined standing up (p > 0.05). The %MVC of all four muscles during physical standing up was statistically significantly higher than during imagined standing up (p < 0.05) on both sides. Moreover, the tibialis anterior muscle of both sides showed a statistically significant contraction before the other muscles (p < 0.05) during physical and imagined standing up.

Muscles can be activated during imagined movement, and the patterns of muscle activity during physical and imagined standing up were similar. Imagined movement may be used in rehabilitation as an alternative or additional technique combined with other techniques to enhance the STS skill.

A contactless electromyography (EMG) electrodes design and development for prosthetics, particularly the Touch Hand 3, was the main objective of this paper. The correlation between EMG electrodes and patch antenna are described, with the problem relating to the dimensions of the covidien electrodes. The purpose of this paper is to improve the signal strength of the EMG electrodes and having them to not be in contact with the skin to cause irritation in the person.

A combination of the contact covidien electrodes and aluminium foil was used to develop electrodes that were in a similar configuration than a Yagi antenna. Different layers of patch elements were designed, developed and implemented.

Different layers of Yagi-patch electrodes are tested with different volunteers and compared with the average signal strengths obtained from the covidien electrodes. An improvement in signal strength with the Yagi-patch electrodes has been found.

The purpose of the work was to design, develop and test EMG electrodes that are cost-effective, reusable and able to improve the signal strengths that are recorded, for better functionality of prosthetic devices.

The integration of EMG and antennae theory to implement a Yagi-patch EMG electrode to improve on signal reception. The electrodes have the properties of being cheap, easy available, can eliminate direct contact and avoiding patches on the skin. Comparison of different layered electrodes with the contactless electrodes close to the skin. Comparison of the different electrodes on a silicone sleeve, which are commonly worn by amputees, placed between the skin and the prosthetic’s socket. Testing the Yagi-patch electrodes with an application with the prosthetic Touch Hand, to allow for the control of a system such as the Touch Hand.

The purpose of this paper is to propose a seamless active interaction control method integrating electromyography (EMG)-triggered assistance and the adaptive impedance control scheme for parallel robot-assisted lower limb rehabilitation and training.

An active interaction control strategy based on EMG motion recognition and adaptive impedance model is implemented on a six-degrees of freedom parallel robot for lower limb rehabilitation. The autoregressive coefficients of EMG signals integrating with a support vector machine classifier are utilized to predict the movement intention and trigger the robot assistance. An adaptive impedance controller is adopted to influence the robot velocity during the exercise, and in the meantime, the user’s muscle activity level is evaluated online and the robot impedance is adapted in accordance with the recovery conditions.

Experiments on healthy subjects demonstrated that the proposed method was able to drive the robot according to the user’s intention, and the robot impedance can be updated with the muscle conditions. Within the movement sessions, there was a distinct increase in the muscle activity levels for all subjects with the active mode in comparison to the EMG-triggered mode.

Both users’ movement intention and voluntary participation are considered, not only triggering the robot when people attempt to move but also changing the robot movement in accordance with user’s efforts. The impedance model here responds directly to velocity changes, and thus allows the exercise along a physiological trajectory. Moreover, the muscle activity level depends on both the normalized EMG signals and the weight coefficients of involved muscles.

The idea is to exploit the natural stability and performance of the human arm during movement, execution and manipulation. The purpose of this paper is to remotely control a handling robot with a low cost but effective solution.

The developed approach is based on three different techniques to be able to ensure movement and pattern recognition of the operator’s arm as well as an effective control of the object manipulation task. In the first, the methodology works on the kinect-based gesture recognition of the operator’s arm. However, using only the vision-based approach for hand posture recognition cannot be the suitable solution mainly when the hand is occluded in such situations. The proposed approach supports the vision-based system by an electromyography (EMG)-based biofeedback system for posture recognition. Moreover, the novel approach appends to the vision system-based gesture control and the EMG-based posture recognition a force feedback to inform operator of the real grasping state.

The main finding is to have a robust method able to gesture-based control a robot manipulator during movement, manipulation and grasp. The proposed approach uses a real-time gesture control technique based on a kinect camera that can provide the exact position of each joint of the operator’s arm. The developed solution integrates also an EMG biofeedback and a force feedback in its control loop. In addition, the authors propose a high-friendly human-machine-interface (HMI) which allows user to control in real time a robotic arm. Robust trajectory tracking challenge has been solved by the implementation of the sliding mode controller. A fuzzy logic controller has been implemented to manage the grasping task based on the EMG signal. Experimental results have shown a high efficiency of the proposed approach.

There are some constraints when applying the proposed method, such as the sensibility of the desired trajectory generated by the human arm even in case of random and unwanted movements. This can damage the manipulated object during the teleoperation process. In this case, such operator skills are highly required.

The developed control approach can be used in all applications, which require real-time human robot cooperation.

The main advantage of the developed approach is that it benefits at the same time of three various techniques: EMG biofeedback, vision-based system and haptic feedback. In such situation, using only vision-based approaches mainly for the hand postures recognition is not effective. Therefore, the recognition should be based on the biofeedback naturally generated by the muscles responsible of each posture. Moreover, the use of force sensor in closed-loop control scheme without operator intervention is ineffective in the special cases in which the manipulated objects vary in a wide range with different metallic characteristics. Therefore, the use of human-in-the-loop technique can imitate the natural human postures in the grasping task.

The purpose of this study is to present a novel hybrid closed-loop control method together with its performance validation for the dexterous prosthetic hand.

The hybrid closed-loop control is composed of a high-level closed-loop control with the user in the closed loop and a low-level closed-loop control for the direct robot motion control. The authors construct the high-level control loop by using electromyography (EMG)-based human motion intent decoding and electrical stimulation (ES)-based sensory feedback. The human motion intent is decoded by a finite state machine, which can achieve both the patterned motion control and the proportional force control. The sensory feedback is in the form of transcutaneous electrical nerve stimulation (TENS) with spatial-frequency modulation. To suppress the TENS interfering noise, the authors propose biphasic TENS to concentrate the stimulation current and the variable step-size least mean square adaptive filter to cancel the noise. Eight subjects participated in the validation experiments, including pattern selection and egg grasping tasks, to investigate the feasibility of the hybrid closed-loop control in clinical use.

The proposed noise cancellation method largely reduces the ES noise artifacts in the EMG electrodes by 18.5 dB on average. Compared with the open-loop control, the proposed hybrid closed-loop control method significantly improves both the pattern selection efficiency and the egg grasping success rate, both in blind operating scenarios (improved by 1.86 s, p < 0.001, and 63.7 per cent, p < 0.001) or in common operating scenarios (improved by 0.49 s, p = 0.008, and 41.3 per cent, p < 0.001).

The proposed hybrid closed-loop control method can be implemented on a prosthetic hand to improve the operation efficiency and accuracy for fragile objects such as eggs.

The primary contribution is the proposal of the hybrid closed-loop control, the spatial-frequency modulation method for the sensory feedback and the noise cancellation method for the integrating of the myoelectric control and the ES-based sensory feedback.

The purpose of this paper is to present gait analysis for five different terrains: level ground, ramp ascent, ramp descent, stair ascent and stair descent.

Gait analysis has been carried out using a combination of the following sensors: force-sensitive resistor (FSR) sensors fabricated in foot insole to sense foot pressure, a gyroscopic sensor to detect the angular velocity of the shank and MyoWare electromyographic muscle sensors to detect muscle’s activities. All these sensors were integrated around the Arduino nano controller board for signal acquisition and conditioning purposes. In the present scheme, the muscle activities were obtained from the tibialis anterior and medial gastrocnemius muscles using electromyography (EMG) electrodes, and the acquired EMG signals were correlated with the simultaneously attained signals from the FSR and gyroscope sensors. The nRF24L01+ transceivers were used to transfer the acquired data wirelessly to the computer for further analysis. For the acquisition of sensor data, a Python-based graphical user interface has been designed to analyze and display the processed data. In the present paper, the authors got motivated to design and develop a reliable real-time gait phase detection technique that can be used later in designing a control scheme for the powered ankle-foot prosthesis.

The effectiveness of the gait phase detection was obtained in an open environment. Both off-line and real-time gait events and gait phase detections were accomplished for the FSR and gyroscopic sensors. Both sensors showed their usefulness for detecting the gait events in real-time, i.e. within 10 ms. The heuristic rules and a zero-crossing based-algorithm for the shank angular rate correctly identified all the gait events for the locomotion in all five terrains.

This study leads to an understanding of human gait analysis for different types of terrains. A real-time standalone system has been designed and realized, which may find application in the design and development of ankle-foot prosthesis having real-time control feature for the above five terrains.

The noise-free data from three sensors were collected in the same time frame from both legs using a wireless sensor network between two transmitters and a single receiver. Unlike the data collection using a treadmill in a laboratory environment, this setup is useful for gait analysis in an open environment for different terrains.

The purpose of this paper is to design and develop a new robotic device for the rehabilitation of the upper limbs. The authors are focusing on a new symmetrical robot which can be used to rehabilitate the right upper limb and the left upper limb. The robotic arm can be automatically extended or reduced depending on the measurements of the patient's arm. The main idea is to integrate electrical stimulation into motor rehabilitation by robot. The goal is to provide automatic electrical stimulation based on muscle status during the rehabilitation process.

The developed robotic arm can be automatically extended or reduced depending on the measurements of the patient's arm. The system merges two rehabilitation strategies: motor rehabilitation and electrical stimulation. The goal is to take the advantages of both approaches. Electrical stimulation is often used for building muscle through endurance, resistance and strength exercises. However, in the proposed approach the electrical stimulation is used for recovery, relaxation and pain relief. In addition, the device includes an electromyography (EMG) muscle sensor that records muscle activity in real time. The control architecture provides the ability to automatically activate the appropriate stimulation mode based on the acquired EMG signal. The system software provides two modes for stimulation activation: the manual preset mode and the EMG driven mode. The program ensures traceability and provides the ability to issue a patient status monitoring report.

The developed robotic device is symmetrical and reconfigurable. The presented rehabilitation system includes a muscle stimulator associated with the robot to improve the quality of the rehabilitation process. The integration of neuromuscular electrical stimulation into the physical rehabilitation process offers effective rehabilitation sessions for neuromuscular recovery of the upper limb. A laboratory-made stimulator is developed to generate three modes of stimulation: pain relief, massage and relaxation. Through the control software interface, the physiotherapist can set the exercise movement parameters, define the stimulation mode and record the patient training in real time.

There are certain constraints when applying the proposed method, such as the sensitivity of the acquired EMG signals. This involves the use of professional equipment and mainly the implementation of sophisticated algorithms for signal extraction.

Functional electrical stimulation and robot-based motor rehabilitation are the most important technologies applied in post-stroke rehabilitation. The main objective of integrating robots into the rehabilitation process is to compensate for the functions lost in people with physical disabilities. The stimulation technique can be used for recovery, relaxation and drainage and pain relief. In this context, the idea is to integrate electrical stimulation into motor rehabilitation based on a robot to obtain the advantages of the two approaches to further improve the rehabilitation process. The introduction of this type of robot also makes it possible to develop new exciting assistance devices.

The proposed design is symmetrical, reconfigurable and light, covering all the joints of the upper limbs and their movements. In addition, the developed platform is inexpensive and a portable solution based on open source hardware platforms which opens the way to more extensions and developments. Electrical stimulation is often used to improve motor function and restore loss of function. However, the main objective behind the proposed stimulation in this paper is to recover after effort. The novelty of the proposed solution is to integrate the electrical stimulation powered by EMG in robotic rehabilitation.

The aim of this study is to investigate subject independent emotion recognition capabilities of EEG and peripheral physiological signals namely: electroocoulogram (EOG), electromyography (EMG), electrodermal activity (EDA), temperature, plethysmograph and respiration. The experiments are conducted on both modalities independently and in combination. This study arranges the physiological signals in order based on the prediction accuracy obtained on test data using time and frequency domain features.

DEAP dataset is used in this experiment. Time and frequency domain features of EEG and physiological signals are extracted, followed by correlation-based feature selection. Classifiers namely – Naïve Bayes, logistic regression, linear discriminant analysis, quadratic discriminant analysis, logit boost and stacking are trained on the selected features. Based on the performance of the classifiers on the test set, the best modality for each dimension of emotion is identified.

 The experimental results with EEG as one modality and all physiological signals as another modality indicate that EEG signals are better at arousal prediction compared to physiological signals by 7.18%, while physiological signals are better at valence prediction compared to EEG signals by 3.51%. The valence prediction accuracy of EOG is superior to zygomaticus electromyography (zEMG) and EDA by 1.75% at the cost of higher number of electrodes. This paper concludes that valence can be measured from the eyes (EOG) while arousal can be measured from the changes in blood volume (plethysmograph). The sorted order of physiological signals based on arousal prediction accuracy is plethysmograph, EOG (hEOG + vEOG), vEOG, hEOG, zEMG, tEMG, temperature, EMG (tEMG + zEMG), respiration, EDA, while based on valence prediction accuracy the sorted order is EOG (hEOG + vEOG), EDA, zEMG, hEOG, respiration, tEMG, vEOG, EMG (tEMG + zEMG), temperature and plethysmograph.

Many of the emotion recognition studies in literature are subject dependent and the limited subject independent emotion recognition studies in the literature report an average of leave one subject out (LOSO) validation result as accuracy. The work reported in this paper sets the baseline for subject independent emotion recognition using DEAP dataset by clearly specifying the subjects used in training and test set. In addition, this work specifies the cut-off score used to classify the scale as low or high in arousal and valence dimensions. Generally, statistical features are used for emotion recognition using physiological signals as a modality, whereas in this work, time and frequency domain features of physiological signals and EEG are used. This paper concludes that valence can be identified from EOG while arousal can be predicted from plethysmograph.