Search results

The purpose of this paper is to test the performance of the control system developed for the helicopter automatic approach and landing on the moving vessel deck, when different values of backlashes are applied to the four control actuators.

The system consists of automatic control algorithm based on the linear quadratic regulator and the vessel motion prediction algorithm based on autoregressive method with parameters calculated using Burg’s method. Necessary navigation data is provided by on-board inertial navigation system/Global Positioning System. Calculated control commands are executed by four electromechanical actuators. Performance of the mission, which is based on selected procedure of approach and landing of the helicopter on the moving vessel deck, is analyzed taking into account different values of backlashes applied to the actuators.

In this paper, a description of the control system dedicated for automatic approach and landing of the helicopter on the moving vessel deck is shown. Necessary information about helicopter dynamic model, control system and vessel motion model is included. Tests showing influence of actuator backlashes on the mission performance are presented.

The developed control methodology can be adapted for selected helicopter and used in prospective development of an automatic flight control system (AFCS) or in a simulator. The system can be used to define in which conditions helicopter can perform safe and successful automatic approach and landing on a moving vessel deck.

In this paper, an integrated control system is presented; influence of the control actuator backlashes on the mission performance is analyzed.

The purpose of this study is to test the performance of the designed automatic control system based on the Linear Quadratic Regulator (LQR) and Linear Quadratic Gaussian (LQG) algorithms during landing of the helicopter on the ship deck. This paper is a further development of the series based on Topczewski et al. (2020).

The system consists of two automatic control algorithms based on LQR and the LQG. It is integrated with the ship motion prediction system based on autoregressive algorithm with parameters calculated using Burg’s method. It is assumed that the source of necessary navigation data is integrated Inertial Navigation System with Global Positioning System. Landing of the helicopter on the ship deck is performed in automatic way, based on the preselected procedure. Performance of the control system is analyzed when all necessary navigation data is available for the system and in case when one of the parameters is unavailable during performing the procedure.

In this paper, description of the designed control system developed for performing the approach and landing of the helicopter using selected procedure is presented. Helicopter dynamic model is validated using the manufacturer data and by test pilots, overview is presented. Necessary information about ship motion model is also included. Tests showing mission performance while using LQR and LQG algorithms applied to the control system are presented and analyzed, taking into account both situations when full navigation data is available/unavailable for the control system.

Results of the system performance analyses can be used for selection of the proper control methodology for prospective helicopters autopilots. Furthermore, the system can be used to analyze the mission safety when information about one of the navigation parameters is identified by the navigation system as unavailable or incorrect and therefore unavailable during landing on the ship deck.

In this paper, control system dedicated for the automatic landing of the helicopter on the ship deck, based on two different control algorithms is presented. Influence of lack of information about one of the navigation parameters on the mission performance is analyzed.

This study aims to investigate the suitability of a multi-step prototyping strategy for producing pneumatic rotary vane actuators (RVAs) for the development of lightweight robots and actuation systems.

RVAs typically have cast aluminum housings and injection-molded seals that consist of hard thermoplastic cores and soft elastomeric overmolds. Using a combination of additive manufacturing (AM), computer numerical control (CNC) machining and elastomer molding, a conventionally manufactured standard RVA was replicated. The standard housing design was modified, and polymeric replicas were obtained by selective laser sintering (SLS) or PolyJet (PJ) printing and subsequent CNC milling. Using laser-sintered molds, actuator seals were replicated by overmolding laser-sintered polyamide cores with silicone (SIL) and polyurethane (PU) elastomers. The replica RVAs were subjected to a series of leakage, friction and durability experiments.

The AM-based prototyping strategy described is suitable for producing functional and reliable RVAs for research and product development. In a representative durability experiment, the RVAs in this study endured between 40,000 and 1,000,000 load cycles. Frictional torques were around 0.5 Nm, which is 10% of the theoretical torque at 6 bar and comparable to that of the standard RVA. Models and parameters are provided for describing the velocity-dependent frictional torque. Leakage experiments at 10,000 load cycles and 6 bar differential pressure showed that PJ housings exhibit lower leakage values (6.8 L/min) than laser-sintered housings (15.2 L/min), and PU seals exhibit lower values (8.0 l/min) than SIL seals (14.0 L/min). Combining PU seals with PJ housings led to an initial leakage of 0.4 L/min, which increased to only 1.2 L/min after 10,000 load cycles. Overall, the PU material used was more difficult to process but also more abrasion- and tear-resistant than the SIL elastomer.

More work is needed to understand individual cause–effect relationships between specific design features and system behavior.

To date, pneumatic RVAs have been manufactured by large-scale production technologies. The absence of suitable prototyping strategies has limited the available range to fixed sizes and has thus complicated the use of RVAs in research and product development. This paper proves that functional pneumatic RVAs can be produced by using more accessible manufacturing technologies and provides the tools for prototyping of application-specific RVAs.

The electromechanical brake system is leading the latest development trend in railway braking technology. The tolerance stack-up generated during the assembly and production process catalyzes the slight geometric dimensioning and tolerancing between the motor stator and rotor inside the electromechanical cylinder. The tolerance leads to imprecise brake control, so it is necessary to diagnose the fault of the motor in the fully assembled electromechanical brake system. This paper aims to present improved variational mode decomposition (VMD) algorithm, which endeavors to elucidate and push the boundaries of mechanical synchronicity problems within the realm of the electromechanical brake system.

The VMD algorithm plays a pivotal role in the preliminary phase, employing mode decomposition techniques to decompose the motor speed signals. Afterward, the error energy algorithm precision is utilized to extract abnormal features, leveraging the practical intrinsic mode functions, eliminating extraneous noise and enhancing the signal’s fidelity. This refined signal then becomes the basis for fault analysis. In the analytical step, the cepstrum is employed to calculate the formant and envelope of the reconstructed signal. By scrutinizing the formant and envelope, the fault point within the electromechanical brake system is precisely identified, contributing to a sophisticated and accurate fault diagnosis.

This paper innovatively uses the VMD algorithm for the modal decomposition of electromechanical brake (EMB) motor speed signals and combines it with the error energy algorithm to achieve abnormal feature extraction. The signal is reconstructed according to the effective intrinsic mode functions (IMFS) component of removing noise, and the formant and envelope are calculated by cepstrum to locate the fault point. Experiments show that the empirical mode decomposition (EMD) algorithm can effectively decompose the original speed signal. After feature extraction, signal enhancement and fault identification, the motor mechanical fault point can be accurately located. This fault diagnosis method is an effective fault diagnosis algorithm suitable for EMB systems.

By using this improved VMD algorithm, the electromechanical brake system can precisely identify the rotational anomaly of the motor. This method can offer an online diagnosis analysis function during operation and contribute to an automated factory inspection strategy while parts are assembled. Compared with the conventional motor diagnosis method, this improved VMD algorithm can eliminate the need for additional acceleration sensors and save hardware costs. Moreover, the accumulation of online detection functions helps improve the reliability of train electromechanical braking systems.

The paper presents a techno-economic analysis of the electromechanical equipment of traditional vertical axis water mills (VAWMs) to help investors, mill owners and engineers to preliminary estimate related benefits and costs of a VAWM repowering.

Two sustainable repowering solutions were examined with the additional aim to preserve the original status and aesthetics of a VAWM: the use of a vertical axis water wheel (VAWW) and a vertical axis impulse turbine. The analysis was applied to a database of 714 VAWMs in Basilicata (Italy), with known head and flow.

Expeditious equations were proposed for both solutions to determine: (1) a suitable diameter as a function of the flow rate; (2) the costs of the electromechanical equipment; (3) achievable power. The common operating hydraulic range of a VAWM (head and flow) was also identified. Reality checks on the obtained results are shown, in particular by examining two Spanish case studies and the available literature. The power generated by the impulse turbine (Turgo type) is twice that of a VAWW, but it is one order of magnitude more expensive. Therefore, the impulse turbine should be used for higher power requirements (>3 kW), or when the electricity is delivered to the grid, maximizing the long-term profit.

Since there is not enough evidence about the achievable performance and cost of a VAWM repowering, this work provides expeditious tools for their evaluation.

Different from manufacturing resources allocation problems, the prices and amounts of limited public service resources could not be changed with the consumers’ requirements and social fairness is the most important objective for improving allocation efficiency. To measure social fairness reasonably, the purpose of this paper is fourfold: first, divide social fairness into longitudinal comparative fairness and crosswise comparative fairness, therefore providing their calculation formula and describing the comprehensive fair degree by using the interval numbers. Second, the comparison regulations of interval numbers are given and the corresponding features are also described. Third, an extension of VIKOR method is put forward for evaluating social fairness of different allocation alternatives with interval numbers. Finally, a numerical example illustrates the proposed method and clarifies the main results developed in the paper.

In this paper, the author depicts the social fair degree as an interval number, and thus proposes the comparison method between any two interval numbers. Based on the basis procedure of the VIKOR method, the paper proposes an extension of the fuzzy VIKOR method with the interval numbers to rank and select the compromise allocation alternatives. Finally, a numerical example illustrates the practicability of the proposed method.

The comparison of interval numbers is very important when the author evaluates the decision alternatives. Through analyzing the present comparison methods, the paper proposes the simple method of comparing the interval numbers, which can obtain the same results with the above two methods. The fuzzy VIKOR method, a popular multi-criteria decision-making method, focusses on ranking and selecting from a set of alternatives in a fuzzy environment. For the fuzzy value, the paper also proposes the extension of the VIKOR method to perform an evaluation and get the compromise alternatives.

According to the huge customers’ requirement, how to improve their social fair degree has become the focus in public service resources allocation, where the social fair degree may be a comprehensive concept which includes the fair degree compared with all the other allocation alternatives and the fair degree compared with the other small group under the same allocation alternative. In the paper, the author defines the above two types of fair degree and then depicts the comprehensive fair degree as their integration, which will be interval numbers.

The purpose of this paper is to propose a new simplified numerical model, based on a very compact semi-empirical formulation, able to simulate the fluid dynamics behaviors of an electrohydraulic servovalve taking into account several effects due to valve geometry (e.g. flow leakage between spool and sleeve) and operating conditions (e.g. variable supply pressure or water hammer).

The proposed model simulates the valve performance through a simplified representation, deriving from the linearized approach based on pressure and flow gains, but able to evaluate the mutual interaction between boundary conditions, pressure saturation and leak assessment. Its performance was evaluated comparing with other fluid dynamics numerical models (a detailed physics-based high-fidelity one and other simplified models available in the literature).

Although still showing some limitations attributable to its simplified formulation, the proposed model overcomes several deficiencies typical of the most common fluid dynamic models available in the literature, describing the water hammer and the nonlinear dependence of the delivery differential pressure with the spool displacement.

Although still based on a simplified formulation with reduced computational costs, the proposed model introduces a new nonlinear approach that, approximating with suitable precision the pressure-flow fluid dynamic characteristic of a servovalve, overcomes the shortcomings typical of such models.

This paper describes a two-month summer intensive course designed to introduce participants with a hands-on technical craft on robotics and to acquire experience in the low-level details of embedded systems. Attendants started this course with a brief introduction to robotics; learned to draw, design and create a personalized 3D structure for their mobile robotic platform and developed skills in embedded systems. They were familiarize with the practices used in robotics, learning to connect all sensors and actuator, developing a typical application on differential kinematic using Arduino, exploring ROS features under Raspberry Pi environment and Arduino – Raspberry Pi communication. Different paradigms and some real applications and programming were addressed on the topic of Artificial Intelligence. Throughout the course, participants were introduced to programming languages (including Python and C++), advanced programming concepts such as ROS, basic API development, system concepts such as I2C and UART serial interfaces, PWM motor control and sensor fusion to improve robotic navigation and localization. This paper describes not just the concept, layout and methodology used on RobotCraft 2017 but also presents the participants knowledge background and their overall opinions, leading to focus on lessons learned and suggestions for future editions.

The electrical properties of piezoelectric vibrators have a crucial influence on the operating state of ultrasonic motors. In order to solve the problem that the current piezoelectric vibrator generates a large amount of heat during vibration to degrade its performance, which in turn affects the normal operation of ultrasonic motors, this paper prepares a novel piezoelectric vibrator and tests its maximum vibration velocity under the working condition, which is more than twice as much as that of the current commercial PZT-8.

The crystal structures of the samples were analyzed by using an X-ray diffractometer. For microstructure observation, samples were observed by scanning electron microscope (SEM). The quasi-static piezoelectric coefficient meter (ZJ-3AN) was used for piezoelectric measurement. Dielectric properties were measured by utilizing an impedance analyzer (Agilent 4294A) with a laboratory heating unit. Ferroelectric hysteresis loops were obtained using a ferroelectric analyzer (Radiant, Multiferroic 100). A Doppler laser vibrometer (Polytec PSV-300F, Germany) and a power amplifier were used for piezoelectric vibration measurements, during which the temperature rise was determined by an infrared radiation thermometer (Victor 303, China).

The ceramics exhibit enhanced piezoelectric performance at 0.1–0.4 mol% of Yb doping contents. The ceramic of 0.4 mol% Yb reaches the maximal internal bias field and presents a larger mechanical quality factor of 1,692 compared with that of 0.2 mol% Yb-doped ceramic, in spite of a slightly decreased dielectric constant of 439 pC/N, the unit of the piezoelectric constant, which is the ratio of the local charge (pC) to the frontal force (N) and electromechanical coupling coefficient of 0.63. The vibrator with this large mechanical quality factor ceramic displays a vibration velocity of up to 0.81 m/s under the constraint of 20 °C temperature rising, which is much higher than commercial high-power piezoelectric ceramics PZT-8.

The enhanced high-power properties of the piezoelectric vibrator by Yb doping may provide a potential application for the high-performance USM and offer the possibility of long-term stable operation under high power for special equipment like USM. In the subsequent phase of research, the novel PZT-based high-power piezoelectric vibrator can be utilized in the USM, and the motor's performance will be evaluated under aerospace conditions to objectively assess the reliability of the piezoelectric vibrator.

This study aims to model scale effects in nano-beams under torsion.

The elastostatic problem of a nano-beam is formulated by a novel stress-driven nonlocal approach.

Unlike the standard strain-driven nonlocal methodology, the proposed stress-driven nonlocal model is mathematically and mechanically consistent. The contributed results are useful for the design of modern devices at nanoscale.

The innovative stress-driven integral nonlocal model, recently proposed in literature for inflected nano-beams, is formulated in the present submission to study size-dependent torsional behavior of nano-beams.