Search results

The purpose of this paper is to analyze the electric propulsion use in civil aviation and propose a framework for certification of electric propulsion subsystems. Although electric propulsion architectures are discussed as key technology for the future of aviation, the industry standards as well as regulations fail to cover the application in full extent, specifically for commercial large airplanes. This paper proposes an approach for the analyses of reliability and certification of the new-generation propulsion system by pointing out the “common structure” among the possible architectures.

The research process used in this paper consists of following steps: the challenges of the hybrid-electric propulsion is listed, the architectures of the hybrid-electric applications in the literature are identified, the differences of the hybrid architectures from the present applications by means of application and standardization are discovered, the architectures are analyzed and the two main subsystems are defined – the present combustion system and the common unit, which is a similar structure used in all-electric aircraft. For this purpose, the standards used for design basis and certification of the present propulsion system and their relationship with the subsystems of the architectures have been analyzed. The procedure for the reliability assessment of the system is given, a framework for the safety assessment and the certification of the propulsion systems is proposed to make it easier and without sacrificing the already accumulated experience. This study shows that by using the common unit, the present certification framework can be used, by focusing on the reliability of the common unit and its integration with the rest of the architecture.

A specific definition of common unit is proposed, to point out the difference in certification efforts of hybrid-electric propulsion architectures. Yet, there is no data available for propulsion-level airborne battery and electrical systems to assess the reliability. Thus, dividing the propulsion system into two main systems and providing a model for certification of the common unit sub-system would be beneficial for easy deployment of the hybrid architectures both for design and for certification. In this paper, it is proposed that by using this common unit, the present certification framework can be used as it is, by focusing on the reliability of the common unit and its integration with the rest of the architecture.

The aircraft certification regulations act in two ways: they provide a starting point for new design projects, and they are a basis for certification of the final system. This study aims to draw focus on certification issues on the new-generation hybrid-electric propulsion systems. With the introduction of hybrid-electric propulsion for large aircraft, the present standards (CS-25, CS-E, CS-P, CS-Battery and CS-APU) create an obstacle for further progress as their borders get into each other. Instead of developing a new set of standard(s), this paper proposes a new approach by dividing the propulsion system into two subsystems.

This research proposes a definition of “common unit” for simplification of the hybrid-electric propulsion architectures for large civil aircraft. The common unit consists of both battery and electrical components and their reliability shall be considered for hybrid-electric propulsion.

The purpose of this paper is to define reliability requirements to be imposed on electric engines to assure similar or higher value of mean time between failures (MTBF) for mixed piston-electric propulsion configurations when compared to classic and unconventional piston engine configurations.

Reliability estimation was done using mathematical model of safety of light aircraft commercial operations. The model was developed on the basis of Federal Aviation Administration and National Transport Safety Board data. The analysis was conducted for numerous piston and electric configurations. It allowed comparison of selected solutions and definition of relation between electric engine MTBF and MTBF calculated for entire mixed piston-electric propulsion system.

It was found that, from reliability point of view, mixed piston-electric engine propulsion is attractive alternative for classic single- and twin-piston configuration. It would allow to at least doubling of MTBF for propulsion without increase of operational cost.

Rationale behind exploiting electric propulsion in aviation is provided. Relation between electric engine reliability and entire propulsion reliability was identified and defined. Minimum requirements concerning MTBF value for electric engine application in aviation was assessed. Conclusions from this study can be used for definition of requirements for new aircraft and by the regulatory authorities.

Originality consists in use of real accident statistics included in mathematical model of safety for assessment of MTBF for various classic and novel piston and piston-electric engine configurations of light aircraft. Output from the study can be exploited by the industry.

This paper aims to present the main results achieved in the frame of the TIVANO national-funded project which may anticipate, in a stepped approach, the evolution and the design of the enabling technologies needed for a hybrid/electric medium altitude long endurance (MALE) unmanned aerial vehicle (UAV) to perform persistent intelligence surveillance reconnaissance (ISR) military operations.

Different architectures of hybrid-propulsion system are analyzed pointing out their operating modes to select the more suitable architecture for the reference aircraft. The selected architecture is further analyzed together with its electric power plant branch focusing on electric system architecture and the selected electric machine. A final comparison between the hybrid and standard propulsion is given at aircraft level.

The use of hybrid propulsion may lead to a reduction of the total aircraft mass and an increase in safety level. However, this result comes together with a reduced performance in climb phase.

This study can be used as a reference for similar studies and it provides a detailed description of propulsion operating modes, power management, electric system and machine architecture.

This study presents a novel application of hybrid propulsion focusing on a three tons class MALE UAV for ISR missions. It provides new operating modes of the propulsion system and a detailed electric architecture of its powertrain branch and machine. Some considerations on noise emissions and infra-red traceability of this propulsion, at aircraft level.

When comparing and contrasting different types of fixed-wing military aircraft on the basis of an energetic efficiency figure-of-merit, unmanned aerial vehicles (UAVs) dedicated to tactical medium-altitude long-endurance (MALE) operations appear to have significant potential when hybrid-electric propulsion and power systems (HEPPS) are implemented. Beginning with a baseline Eulair drone, this paper aims to examine the feasibility of retro-fitting with an Autarkic-Parallel-HEPPS architecture to enhance performance of the original single diesel engine.

In view of the low gravimetric specific energy performance attributes of batteries in the foreseeable future, the best approach was found to be one in which the Parallel-HEPPS architecture has the thermal engine augmented by an organic rankine cycle (ORC). For this study, with the outer mould lines fixed, the goal was to increase endurance without increasing the Eulair drone maximum take-off weight beyond an upper limit of +10%. The intent was to also retain take-off distance and climb performance or, where possible, improve upon these aspects. Therefore, as the focus of the work was on power scheduling, two primary control variables were identified as degree-of-hybridisation for useful power and cut-off altitude during the en route climb phase. Quasi-static methods were used for technical sub-space modelling, and these modules were linked into a constrained optimisation algorithm.

Results showed that an Autarkic-Parallel-HEPPS architecture comprising an ORC thermal energy recovery apparatus and high-end year-2020 battery, the endurance of the considered aircraft could be increased by 11%, i.e. a total of around 28 h, including de-icing system, in-flight recharge and emergency aircraft recovery capabilities. The same aircraft with the de-icing functionality removed resulted in a 20% increase in maximum endurance to 30 h.

Although the adoption of Series/Parallel-HEPPS only solutions do tend to generate questionable improvements in UAV operational performance, combinations of HEPPS with energy recovery machines that use, for example, an ORC, were found to have merit. Furthermore, such architectural solutions could also offer opportunity to facilitate additional functions like de-icing and emergency aircraft recovery during engine failure, which is either not available for UAVs today or prove to be prohibitive in terms of operational performance attributes when implemented using a conventional PPS approach.

This technical paper highlights a new degree of freedom in terms of power scheduling during climbing transversal flight operations. A control parameter of cut-off altitude for all types of HEPPS-based aircraft should be introduced into the technical decision-making/optimisation/analysis scheme and is seen to be a fundamental aspect when conducting trade-studies with respect to degree-of-hybridisation for useful power.

The purpose of this article is to provide an outline of the challenges of thermal management for more-electric, hybrid-electric and all-electric aircraft, and to notionally discuss potential solutions.

A code algorithm was developed to facilitate architecture-level analysis of the coupled relationship between the propulsion system, the thermal management system, and the takeoff gross weight of aircraft with advanced propulsion systems.

A variety of coupled relationships between the propulsion and thermal management systems are identified, and their impact on the conceptual design choices for electric aircraft are discussed qualitatively.

This conceptual article merely illuminates some driving factors associated with thermal management. The software is still in its adolescence and is experiencing ongoing development.

Thermal regulation in electric aircraft is shown to be a topic that should be addressed in tandem with propulsion system architecture definition and component selection. High-power electronics are expected to emit an immense amount of heat, and the common avenues of heat dissipation could substantially impact the aircraft’s weight, drag and performance. Conversely, strategic management of this waste heat could support subsystems or even produce additional thrust.

This paper aims to direct the attention of researchers and designers in the field of hybrid- or all-electric aircraft design toward the challenges and potential benefits of thermal management.

This paper describes a novel conceptual design software and discusses its logic flow and implications.

This paper aims to create a terminal area operations (TAO) analysis software that can accurately appreciate the nuances of hybrid electric distributed propulsion (HEDP), including unique failure modes and powered-lift effects.

The program was written in Visual Basic with a user interface in Microsoft Excel. It integrates newly defined force components over time using a fourth order Runge-Kutta scheme.

Powered-lift, HEDP failure modes and electrical component thermal limitations play significant roles on the performance of aircraft during TAO. Thoughtful design may yield better efficiency; however, care must be given to address negative implications. Reliability and performance can be improved during component failure scenarios.

This program has and will support the investigation of novel propulsion system architectures and aero-propulsive relationships through accurate TAO performance prediction.

Powered-lift and HEDP architectures can be employed to improve takeoff and climb performance, both during nominal and component failure scenarios, however, reliance on powered-lift may result in faster approach speeds. High-lift and system failure behavior may also allow new approaches to design and sizing requirements.

This program is unique in both the public and private sectors in its broad capabilities for TAO analysis of aircraft with HEDP systems and powered-lift.

This paper aims to review national aeronautics and space administration (NASA’s) broad investments in electrified aircraft propulsion (EAP). NASA investments are guided by an assessment of potential market impacts, technical key performance parameters, and technology readiness attained through a combination of studies, enabling fundamental research and flight research.

The impact of EAP varies by market and NASA is considering three markets as follows: national/international, on-demand mobility and short-haul regional air transport. Technical advances in key areas have been made that indicate EAP is a viable technology. Flight research is underway to demonstrate integrated solutions and inform standards and certification processes.

A key finding is that sufficient technical advances in key areas have been made, which indicate EAP is a viable technology for aircraft. Significant progress has been made to reduce EAP adoption barriers and further work is needed to transition the technology to a commercial product and improve the technology, so it is applicable to large transonic aircraft.

Significant progress has been made to reduce EAP adoption barriers and further work is needed to transition the technology to a commercial product and improve the technology, so it is applicable to large transonic aircraft.

This paper will review the activities of the hybrid gas-electric subproject of the Advanced Air Transport Technology Project, the Revolutionary Vertical Lift Technology Project and the X-57 Flight Demonstration Project, and discuss the potential EAP benefits for commercial and military applications. This paper focuses on the vehicle-related activities, however, there are related NASA activities in air space management and vehicle autonomy activities, as well as a breakthrough technology project called the Convergent Aeronautics Solutions Project. The target audience is people interested in EAP.

The aim of this paper is to assess the potential of fuel-battery hybrid narrow-body (180PAX) transport aircraft according to different design ranges for an entry-into-service (EIS) of 2035.

The philosophy used in the design of the twin-engine fuel-battery hybrid concept is to use the power of an electric motor during cruise to drive a single propulsive device, whereas the other one is powered conventionally by an advanced gas turbine. A methodology for the sizing and performance assessment of hybrid energy aircraft was previously proposed by the authors. Based on this methodology, the overall sizing effects at aircraft level are considered to size the hybrid aircraft to different range applications. To evaluate the hybrid concept, performance was contrasted against a conventional aircraft projected to EIS 2035 and sized for identical requirements. Additionally, sensitivity of the prospects against different battery technology states was analysed.

The best suited aircraft market for the application of the fuel-battery hybrid transport aircraft concept considered is the regional segment. Under the assumption of a battery-specific energy of 1.5 kWh/kg, block fuel reduction up to 20 per cent could be achieved concurrently with a gate-to-gate neutral energy consumption compared to an advanced gas-turbine aircraft. However, a large increase in maximum take-off weight (MTOW) occurs resulting from battery weight, the additional electrical system weight, and the cascading sizing effects. It strongly counteracts the benefit of the hybrid-electric propulsion technology used in this concept for lower battery-specific energy and for longer design ranges.

The findings will contribute to the evaluation of the feasibility and impact of hybrid energy transport aircraft as potential key enablers of the European and US aeronautical program goals towards 2035.

The paper draws its value from the consideration of the overall sizing effects at aircraft level and in particular the impact of the hybrid-electric propulsion system to investigate the prospects of fuel-battery hybrid narrow-body transport aircraft sized at different design ranges.

Recent advancements in electrified transportation have been necessitated by the need to reduce environmentally harmful emissions. Accordingly, several aviation organisations and governments have introduced stringent emission reduction targets for 2050. One of the most promising technologies proposed for achieving these targets is turboelectric distributed propulsion (TeDP). The objective of this study was to explore and identify key indicators for enhancing the applicability of TeDP in air transportation.

An enhancement valuation method was proposed to overcome the challenges associated with TeDP in terms of technological, economic and environmental impacts. The result indicators (RIs) were determined; the associated performance indicators (PIs) were analysed and the key RIs and PIs for TeDP were identified. Quantitative measurements were acquired from a simulated TeDP case study model to estimate the established key PIs.

It was determined that real-world TeDP efficiency could be enhanced by up to 8% by optimising the identified key PIs.

This study is the first to identify the key PIs of TeDP and to include a techno-economic environmental risk analysis (TERA) based on the identified key PIs. The findings could guide developers and researchers towards potential focus areas to realise the adoption of TeDP.

Velomobiles or bicycles cars are human-powered vehicles, enclosed for improving aerodynamic performance and protection from weather and collisions. The purpose of this paper is to design and develop a three-wheeled velomobile equipped with a hybrid human-electric propulsion system.

The mechanical layout has been developed in order to improve safety, a CAD code has been used for the design and the dynamic performances have been studied by means of specific multi-body codes. The electric propulsion system has been designed both with analytical and FEM methods.

A special three-wheeled tilting vehicle layout equipped with a four-bar linkage connection has been developed. A particular synchronous reluctance machine has been developed, which is very suitable for human-electric hybrid propulsion. A MATLAB code for integrated mechanical and electrical analysis has been developed.

A new kind of light vehicle has been conceived. A new synchronous reluctance machine with high efficiency has been developed. A performance analysis in electric, human and hybrid working modes has been presented, which takes into account the specific features of both the electric motor and the pedaling legs. A prototype of the vehicle has been built.