Search results
1 – 4 of 4Selma Bahi and Mohamed Nabil Houhou
This study aims to investigate the behavior of different types of stone columns, including the short and floating columns, as well as the ordinary and the geosynthetic encased…
Abstract
Purpose
This study aims to investigate the behavior of different types of stone columns, including the short and floating columns, as well as the ordinary and the geosynthetic encased stone columns (OSC and GESC). The effectiveness of the geosynthetic encasement and the impact of the installation using the lateral expansion method on the column performance is evaluated through a three-dimensional (3D) unit cell numerical analysis.
Design/methodology/approach
A full 3D numerical analysis is carried out using the explicit finite element code PLAXIS 3D to examine the installation influence on settlement reduction (ß), lateral displacement (Ux) and vertical displacement (Uz) relative to different values of lateral expansion of the column (0% to 15%).
Findings
The findings demonstrate the superior performance of GESC, particularly short columns outperforming floating counterparts. This enhanced performance is attributed to the combined effects of geosynthetic encasement and increased lateral expansion. Notably, these strategies contribute significantly to decreasing lateral displacement (Ux) at the column’s edge and reducing vertical displacement (Uz) under the rigid footing.
Originality/value
In contrast to previous studies that examined the installation effect of OSC contexts, this paper presents a comprehensive investigation into the effect of geosynthetic encasement and the installation effects using the lateral expansion method in very soft soil, using 3D numerical simulation. The study emphasizes the significance of the consideration of geosynthetic encasement and lateral expansion of the column during the design process to enhance column performance.
Details
Keywords
Daniel E.S. Rodrigues, Jorge Belinha and Renato Natal Jorge
Fused Filament Fabrication (FFF) is an extrusion-based manufacturing process using fused thermoplastics. Despite its low cost, the FFF is not extensively used in high-value…
Abstract
Purpose
Fused Filament Fabrication (FFF) is an extrusion-based manufacturing process using fused thermoplastics. Despite its low cost, the FFF is not extensively used in high-value industrial sectors mainly due to parts' anisotropy (related to the deposition strategy) and residual stresses (caused by successive heating cycles). Thus, this study aims to investigate the process improvement and the optimization of the printed parts.
Design/methodology/approach
In this work, a meshless technique – the Radial Point Interpolation Method (RPIM) – is used to numerically simulate the viscoplastic extrusion process – the initial phase of the FFF. Unlike the FEM, in meshless methods, there is no pre-established relationship between the nodes so the nodal mesh will not face mesh distortions and the discretization can easily be modified by adding or removing nodes from the initial nodal mesh. The accuracy of the obtained results highlights the importance of using meshless techniques in this field.
Findings
Meshless methods show particular relevance in this topic since the nodes can be distributed to match the layer-by-layer growing condition of the printing process.
Originality/value
Using the flow formulation combined with the heat transfer formulation presented here for the first time within an in-house RPIM code, an algorithm is proposed, implemented and validated for benchmark examples.
Details
Keywords
Rajneesh Kumar and Pradeep Kumar Jha
The purpose of this study is to explore how a time-varying electromagnetic stirring (EMS) affects the fluid flow and solidification behavior in a slab caster continuous casting…
Abstract
Purpose
The purpose of this study is to explore how a time-varying electromagnetic stirring (EMS) affects the fluid flow and solidification behavior in a slab caster continuous casting mold. Further, the study of inclusion movements in the mold is carried out under the effect of a time-varying electromagnetic field.
Design/methodology/approach
A three-dimensional coupled numerical model of solidification and magnetohydrodynamics has been developed for slab caster mold to investigate the inclusions transport by discrete phase model with the use of user-defined functions. Enthalpy porosity and the Lagrangian approach are applied to analyze the behavior of solidification and inclusion.
Findings
The study shows that the magnetic field density distribution has a radial symmetry in relation to the stirrer’s center. As the EMS current intensity increases, the strength of the lower recirculation zone gradually decreases and nearly disappears at higher intensities. Additionally, the area of localized remelting zone expands in the solidification front with rising current intensity. The morphology of inclusions and EMS current intensity have a significant impact on the behavior and movement of inclusions within the molten steel.
Practical implications
By using the model, one can optimize the EMS parameter to enhance the quality of steel casting through the elimination of impurities and by improving the microstructure of cast that mainly depend on solidification and flow patterns of molten steel.
Originality/value
Until now, the use of time-varying EMS in the slab caster mold to study solidification and inclusion behavior has not been explored.
Details
Keywords
Mohammad Saeid Aghighi, Christel Metivier and Sajad Fakhri
According to the research, viscoplastic fluids are sensitive to slipping. The purpose of this study is to determine whether slip affects the Rayleigh–Bénard convection of…
Abstract
Purpose
According to the research, viscoplastic fluids are sensitive to slipping. The purpose of this study is to determine whether slip affects the Rayleigh–Bénard convection of viscoplastic fluids in cavities and, if so, under what conditions.
Design/methodology/approach
The wall slip was evaluated using a model created for viscoplastic (Bingham) fluids. The coupled conservation equations were solved numerically using the finite element method. Simulations were performed for various parameters: the Rayleigh number, yield number, slip yield number and friction number.
Findings
Wall slip determines two essential yield stresses: a specific yield stress value beyond which wall slippage is impossible (S_Yc); and a maximum yield stress beyond which convective flow is impossible (Y_c). At low Rayleigh numbers, Y_c is smaller than S_Yc. Hence, the flow attained a stable (conduction) condition before achieving the no-slip condition. However, for more significant Rayleigh numbers Y_c exceeded S_Yc. Thus, the flow will slip at low yield numbers while remaining no-slip at high yield numbers. The possibility of slipping on the wall increases the buoyancy force, facilitating the onset of Rayleigh–Bénard convection.
Originality/value
An essential aspect of this study lies in its comprehensive examination of the effect of slippage on the natural convection flow of viscoplastic materials within a cavity, which has not been previously investigated. This research contributes to a new understanding of the viscoplastic fluid behavior resulting from slipping.
Details