Search results

The purpose of this study is to utilize two types of gypsum mold wastes from two different factories as novel and economical reinforcing fillers for composites that may be useful for building materials and floors. Two types of gypsum mold wastes from two different factories as raw materials were incorporated into linear low density polyethylene (LLDPE) aiming to get rid of that waste in one hand and obtaining useful economical composites suitable for building materials and floors.

Composites were prepared from two types of gypsum mold wastes substituted with different ratios from raw gypsum and LLDPE throughout the melt blending technique. The physico-mechanical and electrical investigations in addition to the morphology of the composites were included.

The mechanical results illustrate that substituting commercial gypsum with gypsum mold waste positively affects tensile strength, flexural strength and hardness shore D for the LLDPE composites. The tensile strength increased from 5 MPa for LLDPE filled with commercial gypsum as blank samples to 11.2 and 13.2 MPa for LLDPE filled with D and S waste. Also, electrical properties which include both permittivity ɛ′ and dielectric loss ɛ″ increased with increasing the waste content in the LLDPE matrix. In addition to the electrical conductivity values, σ lies in the order of insulation materials. Consequently, it is possible to produce materials with a gypsum matrix by adding industrial waste, improving the behavior of the traditional gypsum and enabling those composites to be applied in various construction applications as eco-friendly tiles.

This study aims to prepare eco-friendly composites based on LLDPE and waste gypsum mold to preserve resources for the coming generations, other than lowering the environmental footprint and saving the costs of getting rid of it.

The imperative to conserve resources and minimize operational expenses has spurred a notable increase in the adoption of lean manufacturing within the context of the circular economy across diverse industries in recent years. However, a notable gap exists in the research landscape, particularly concerning the implementation of lean practices within the pharmaceutical industry to enhance circular economy performance. Addressing this void, this study endeavors to identify and prioritize the pivotal drivers influencing lean manufacturing within the pharmaceutical sector.

The outcome of this rigorous examination highlights that “Continuous Monitoring Process for Sustainable Lean Implementation,” “Management Involvement for Sustainable Implementation” and “Training and Education” emerge as the most consequential drivers. These factors are deemed crucial for augmenting circular economy performance, underscoring the significance of management engagement, training initiatives and a continuous monitoring process in fostering a closed-loop practice within the pharmaceutical industry.

The findings contribute valuable insights for decision-makers aiming to adopt lean practices within a circular economy framework. Specifically, by streamlining the process of developing a robust action plan tailored to the unique needs of the pharmaceutical sector, our study provides actionable guidance for enhancing overall sustainability in the manufacturing processes.

This study represents one of the initial efforts to systematically identify and assess the drivers to LM implementation within the pharmaceutical industry, contributing to the emerging body of knowledge in this area.

Green, lean and six sigma (GLSS) practices are widely used and well accepted techniques that have the capability to improve the economic, social and environmental performance of Pakistani small and medium enterprises (SMEs). However, implementation of these practices in an integrated approach has not yet been witnessed in Pakistani SMEs due to a variety of challenges. To overcome the implementation challenges, this study has analyzed the impact of GLSS implementation over the sustainability in Pakistani SMEs.

This study consists of two phases. In phase 1, interviews were conducted to scrutinize the elements of GLSS implementation to simplify the model and in phase 2, a questionnaire survey was conducted to collect the data from the SMEs. The partial least squares structural equation modeling (PLS-SEM) approach is used to analyze the relationships among the latent variables and constructs.

Results showed that, leadership for GLSS, understanding GLSS techniques and technology upgradation are considered the most important elements for GLSS implementation in Pakistani SMEs. The environmental and social perspectives have been given more weightage compared to economical perspective. This inferred that there is a need to focus more on environmental and social perspectives in SMEs as compared to economic perspectives to achieve sustainable growth. Moreover, the results of the hypothesis testing revealed that GLSS implementation has a significant positive impact over the sustainability in SMEs considering the Pakistani scenario (β = 0.529, STDEV = 0.078, t = 6.81, p = < 0.001).

This study is the first of its kind for Pakistani SMEs. The structural model developed in this study for Pakistani SMEs will help practitioners to understand the important elements of GLSS implementation and sustainability dimensions.

To contribute to the identification of the parameters influencing the behavior of textile-reinforced concrete (TRC), the purpose of this paper is to investigate the flexural behavior of TRC-based plates under four-point bending notably designed in the context of sustainable development and the substitution of mortar components with natural and abundant materials.

An extensive experimental campaign was focused about two main parameters. The first one emphases the textile reinforcements, such as the number of layers, the nature and the textile mesh size. In the second step, the composition of the mortar matrix was explored through the use of dune sand as a substitute of the river one.

Test results in terms of load-displacement response and failure patterns were highlighted, discussed and confronted to literature ones. As key findings, an increase of the load-bearing capacity and ductility, comparable to the use of an industrially produced second textile layer was recorded with the use of dune sand in the mortar mix design. The designed ecofriendly samples with economic concerns denote the significance of obtained outcomes in this research study.

The novelty of the present work was to valorize the use of natural dune sand to design new TRC samples to respond to the environmental and economical requirements. The obtained values provide an improved textiles–matrix interface performance compared to classical TRC samples issued from the literature.

Night lighting reflects the prosperous development of economic and the increasingly rich and colorful cultural life. Currently, various technical standards, protocols and management specifications have been developed to build a safe, comfortable and economical lighting environment. However, prevailing evaluation systems focus on objective indexes of illumination and have ignored environmental characteristics and subjective feelings and lacked consideration of regional culture, economic benefit, management and maintenance. In this context, a lighting evaluation system combining subjective and objective is proposed for the first time in this study to explore approaches to guide the development of a healthy and comfortable urban night-time environment.

Existing research and relevant lighting standards are analyzed and an evaluation model with a logical hierarchy is constructed by combining with the evaluation theory that is set based on people and the environment. The index weights were scientifically determined on the basis of the analytic hierarchy process (AHP) and fuzzy comprehensive evaluation method. The rationality and validity of the proposed evaluation system is verified in accordance with field projects and case studies.

Taking into account traditional and cultural factors, the evaluation model established has an acceptable accuracy. Evaluation based on subjective-objective combination can provide a scientific basis for the management and optimization of night lighting.

The proposed evaluation system can serve as a guiding reference for other areas of cultural identity and esthetic perspective.

The objective of this research is to evaluate the influence of mineral additions on the mechanical performances of polymer concrete. This study aims to propose a novel approach formulation of polymer concrete based on reduction in the quantity of the binder and disposal of large quantities of industrial by-products and household waste such as the marble, the brick and silica fume whose valuation in polymer concrete could be an interesting ecological and economical alternative. The incorporation of a rate of 10% brick powder affects the distribution of pores inside polymer concrete, that is, the pore diameters become thinner and decrease and the porosity becomes evenly distributed. The recycled mineral brick powder addition in polymer concrete mix improved the mechanical properties.

This polymer concrete was prepared by using polyester resin and two different types of sand, following a new formulation based on an empirical method. Furthermore, the optimal binder percentage was of 20% resin and a mixture of 52% dune sand and 48% quarry sand according to the Abrams method. To achieve our objective, five rates (from 2% to 10%) of brick powder, marble powder and silica fume were examined. Afterwards, its mechanical characteristics were evaluated via a three-point flexural with compressive resistance. The findings indicated that the addition of brick, marble and silica fume to polymer concrete increases the flexural strength with 21.84%, 12.76% and 9.07%, respectively.

Concerning the compressive strength, the best resistance is that of polymer concretes based on brick powder, and this economic formulation of polymer concrete serves the optimal cost/resistance ratio criteria. It allows an improvement in the mechanical resistance of concrete are obtained by adding brick powder that exceed that of the reference concrete.

In the past few decades, there has been several contribution concerning the subject of the reduction of the binder quantity in polymer concretes and adding the industrial and household wastes. However, previous studies revolving around the same area disregarded the effect of the brick powder, which appears scientifically of great importance for enriching the literature.

Corporate social responsibility (CSR) practices frequently result in increased costs for Chinese international contractors (CICs), where profitability is the primary objective; therefore, internal corporate drivers and external pressures play a crucial role in encouraging them to engage in sustainable CSR practices. This study systematically examines the dynamic impact of internal and external stakeholders on the CSR practices of CICs.

This study adopted a structural equation model (SEM) to identify and validate a correlation between stakeholders and CSR practices. Standardized causal coefficients estimated in SEM were used to construct a fuzzy cognitive map (FCM) model to illustrate the effect of stakeholders on CSR practices with linkage direction and weights. Predictive, diagnostic, and hybrid analyses were performed to dynamically model the variation in stakeholders on the evolution of CSR practices.

The empirical results demonstrate that (1) employee participation in CSR has the greatest impact on CSR practices, followed by CSR strategies, partner and customer expectations, and finally government regulations. (2) In the early stage of CSR fulfillment, CSR strategies have the greatest influence on CSR practices; in the later stage of CSR fulfillment, employee participation in CSR has the greatest influence on CSR practices. (3) In the long run, the most effective and economical integrated interventions are those that address employee participation in CSR, partner expectations and customer expectations, and intervention in CSR strategies is needed if the level of CSR practice needs to be improved in the short term.

This study contributes to the research on the influence mechanisms of CSR practices of CICs and systematically analyzes their dynamic influence on CSR practices of CICs from the perspective of stakeholders.

Wearing clothes requires specifications for feeling comfortable, derived from the fibres, fabrics and finishing properties. This study aims to deal with the effect of economic blends containing hollow fibres, bamboo and cotton/polyester waste on the mechanical properties of the produced fabrics and the appropriate end use.

This research included two blends: one consisted of cotton/polyester wastes blended with bamboo and the other to which Chorisia fibres were added. Two weft counts 10,6/1 Ne were made from each blend, which were used to produce four fabric samples (S1 Chorisia-free and S2 with Chorisia); additionally, another two samples were dyed that contain Chorisia (S3) from each count. The six samples were tested by Kawabata Evaluation System (KES).

The samples gave a good total hand value (THV) for use as men's winter suits, where the thicker count 6/1, with and without Chorisia had better properties, also both counts 6, 10/1 with dye. The hollow fibres affected the fabrics’ properties, including thickness, shear, bending, thermal conductivity and weight. Both blends had a positive effect on THV.

Cotton/polyester waste, Chorisia and bamboo fibres were tested, and 2% Remazol Yellow GNL dye was used.

The ratio of blending, weft counts and dye affected the fabric’s properties, with consequences for the use of the Kawabata system and its applications.

The fabrics used in this research may be considered to be economical and have good THV.

The study proved the usefulness of fabrics made of two blends. The Chorisia component may be seen as a good alternative to cotton fibres to reduce the cost of producing high-consumption winter suit fabrics.

Efforts to implement supplier selection and order allocation (SSOA) approaches in small and medium-sized enterprises (SMEs) are quite restricted due to the lack of affordable and simple-to-use strategies. Although there is a huge amount of literature on SSOA techniques, very few studies have attempted to address the issues faced by SMEs and develop strategies from their point of view. The purpose of this study is to provide an effective, practical, and time-tested integrated SSOA framework for evaluating the performance of suppliers and allocating orders to them that can improve the efficiency and competitiveness of SMEs.

This study was conducted in two stages. First, an integrated supplier selection approach was designed, which consists of the analytic hierarchy process and newly developed measurement alternatives and ranking using compromise solution to evaluate supplier performance and rank them. Second, the Wagner-Whitin algorithm is used to determine optimal order quantities and optimize inventory carrying and ordering costs. The joint impact of quantity discounts is also evaluated at the end.

Insights derived from the case study proved that the proposed approach is capable of assisting purchase managers in the SSOA decision-making process. In addition, this case study resulted in 10.89% total cost savings and fewer stock-out situations.

Criteria selected in this study are based on the advice of the managers in the selected manufacturing organizations. So the methods applied are limited to manufacturing SMEs. There were some aspects of the supplier selection process that this study could not explore. The development of an effective, reliable supplier selection procedure is a continuous process and it is indeed certainly possible that there are other aspects of supplier selection that are more crucial but are not considered in the proposed approach.

Purchase managers working in SMEs will be the primary beneficiaries of the developed approach. The suggested integrated approach can make a strategic difference in the working of SMEs.

A practical SSOA framework is developed for professionals working in SMEs. This approach will help SMEs to manage their operations effectively.

The purpose of this paper is to investigate the unexplored part of the historical evolution of travel agencies in Spain, from the end of the 20th century to the 21st century. When examining promotion strategies, the study focuses on the change in marketing and public relations strategies based on the incorporation of information and communication technologies and, in particular, the use of the internet.

This study draws on a qualitative analysis of the different strategies used by traditional agencies and online agencies in Spain from the mid-19th century to the present. This analysis shows how traditional communication strategies survived at the beginning of the 21st century, together with other more innovative ones, while some disappeared, being eliminated by the new online travel agencies, which created a particular conception of marketing and communication. This paper is divided into the following parts: the introduction; the beginnings of travel agency promotion in the 20th century; the evolution of promotion in travel agencies since the late 20th century; communication innovation at the beginning of the 21st century; online travel agencies; and conclusions.

This study shows that although online agencies did not manage to position themselves with a large turnover, they generated advantages and sharpened their imagination to create a new, more economical advertising model, eliminating the costs of public relations and advertising campaigns. In addition, they allowed clients to have greater independence when making their reservations, while enabling them to monitor the tastes of potential and real clients and add blogs so that consumers could express their degree of satisfaction with the product or services provided by the agency.

The focus of attention is the travel agency sector in Spain and, more specifically, communication. Studies on travel agencies and their marketing have been very scarce and partial, impeding professionals in the tourism sector from having a broad vision to direct their promotional and public relations actions. The originality of this article lies in its making a comparison between two different visions of tourism marketing and, specifically, of travel agencies, that is, the traditional vision and the innovative one. It thus helps all professionals in the sector to value and improve their marketing and communication strategies.