Search results

This paper aims to obtain the evolution law of dynamic performance of CR400BF electric multiple unit (EMU).

Using the dynamic simulation based on field test, stiffness of rotary arm nodes and damping coefficient of anti-hunting dampers were tested. Stiffness, damping coefficient, friction coefficient, track gauge were taken as random variables, the stochastic dynamics simulation method was constructed and applied to research the evolution law with running mileage of dynamic index of CR400BF EMU.

The results showed that stiffness and damping coefficient subjected to normal distribution, the mean and variance were computed and the evolution law of stiffness and damping coefficient with running mileage was obtained.

Firstly, based on the field test we found that stiffness of rotary arm nodes and damping coefficient of anti-hunting dampers subjected to normal distribution, and the evolution law of stiffness and damping coefficient with running mileage was proposed. Secondly stiffness, damping coefficient, friction coefficient, track gauge were taken as random variables, the stochastic dynamics simulation method was constructed and applied to the research to the evolution law with running mileage of dynamic index of CR400BF EMU.

With the help of multi-body dynamics software UM, the paper uses Kik–Piotrowski model to simulate wheel-rail contact and Archard wear model for rail wear.

The CRH5 vehicle-track coupling dynamics model is constructed for the wear study of rails of small radius curves, namely 200 and 350 m in Guangzhou East EMU Depot and those 250 and 300 m radius in Taiyuan South EMU Depot.

Results show that the rail wear at the straight-circle point, the curve center point and the circle-straight point follows the order of center point > the circle-straight point > the straight-circle point. The wear on rail of small radius curves intensifies with the rise of running speed, and the wearing trend tends to fasten as the curve radius declines. The maximum rail wear of the inner rail can reach 2.29 mm, while that of the outer rail, 10.11 mm.

With the increase of the train passing number, the wear range tends to expand. The rail wear decreases with the increase of the curve radius. The dynamic response of vehicle increases with the increase of rail wear, among which the derailment coefficient is affected the most. When the number of passing vehicles reaches 1 million, the derailment coefficient exceeds the limit value, which poses a risk of derailment.

In order to systematically grasp the changes and matching characteristics of wheel and rail profiles of high speed railway (HSR) in China, 172 rail profile measurement points and 384 wheels of 6 high-speed electric motive unites (EMUs) were selected on 6 typical HSR lines, including Beijing–Shanghai, Wuhan–Guangzhou, Harbin–Dalian, Lanzhou–Xinjiang, Guiyang–Guangzhou and Dandong–Dalian for a two-year field test.

Based on the measured data, the characteristics of rail and wheel wear were analyzed by mathematical statistics method. The equivalent conicity of wheel and rail matching in a wheel reprofiling cycle was analyzed by using the measured rail profile.

Results showed that when the curve radius of HSR was larger than 2,495 m, the wear rate of straight line and curve rail was almost the same. For the line with annual traffic gross weight less than 11 Mt, the vertical wear of rail was less than 0.01 mm. The wear rate of the rail with the curve radius less than 800 m increased obviously. The wheel tread wear of EMUs on Harbin–Dalian line, Lanzhou–Xinjiang line and Dandong–Dalian line was relatively large, and the average wear rate of tread was about 0.05–0.06 mm·(10,000 km)⁻¹, while that of Beijing–Shanghai line, Wuhan–Guangzhou line and Guiyang–Guangzhou line was about 0.03–0.035 mm·(10,000 km)⁻¹. When the wear range was small, the equivalent conicity increased with the increase of wheel tread wear. When the wear range of wheel was wide, the wheel–rail contact points were evenly distributed, and the equivalent conicity did not increase obviously.

This research proposes the distribution range of the equivalent conicity in one reprofiling cycle of various EMU trains, which provides guidance for the condition-based wheel reprofiling.

This study aims to analyze the development direction of train speed, density and weight in China.

The development of China's railway in the past 40 years can be divided into 3 stages. At the stage of potential tapping and capacity expansion, it is important to improve the train weight and density by upgrading the existing lines, and improving transportation capacity rapidly. At the stage of railway speed increase, the first priority is to increase train speed, reduce the travel time of passenger train, and synchronously take into account the increase of train density and weight. At the stage of developing high-speed railway, train speed, density and weight are co-developing on demand.

The train speed of high-speed railway will be 400 km h⁻¹, the interval time of train tracking will be 3 min, and the traffic density will be more than 190 pairs per day. The running speed of high-speed freight EMU will reach 200 km h⁻¹ and above. The maximum speed of passenger train on mixed passenger and freight railway can reach 200 km h⁻¹. The minimum interval time of train tracking can be compressed to 5 min. The freight train weight of 850 m series arrival-departure track railway can be increased to 4,500–5,000 t and that of 1,050 m series to 5,500–6,400 t. EMU trains should gradually replace ordinary passenger trains to improve the quality of railway passenger service. Small formation trains will operate more in intercity railway, suburban railway and short-distance passenger transportation.

The research can provide new connotations and requirements of railway train speed, density and weight in the new railway stage.

When a railway emergency occurs, it often leads to unexpected consequences, especially for trains of higher speed and larger passenger flow. Therefore, the railway emergency plan, a pre-established plan to deal with emergencies, plays an important role in reducing injuries and losses. However, the existing railway emergency plans remain as plain-text documents, requiring lots of manual work to capture the important regulations. This paper aims to propose a visualized, formal and digital railway emergency plan modeling method based on hierarchical timed Petri net (HTPN), which is also of better interpretability.

First, the general railway emergency plan was analyzed. Second, the HTPN-based framework model for the general railway emergency plan was proposed. Then, the instantiated model of electric multiple units rescue emergency plan was built by ExSpect, a Petri net simulation tool.

The experiments show that the proposed model is more digital and of better readability, visualization and performability, and, meanwhile, can generally conform to the practice well, offering a promising reference for future analysis of the optimization of railway emergency plans.

This study offers a promising reference for future analysis of the optimization of railway emergency plans.

In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface, this study aims to analyze the utilization of wheel-rail adhesion coefficient under different medium conditions and propose relevant measures for reasonable and optimized utilization of adhesion to ensure the traction/braking performance and operation safety of trains.

Based on the PLS-160 wheel-rail adhesion simulation test rig, the study investigates the variation patterns of maximum utilized adhesion characteristics on the rail surface under different conditions of small creepage and large slip. Through statistical analysis of multiple sets of experimental data, the statistical distribution patterns of maximum utilized adhesion on the rail surface are obtained, and a method for analyzing wheel-rail adhesion redundancy based on normal distribution is proposed. The study analyzes the utilization of traction/braking adhesion, as well as adhesion redundancy, for different medium under small creepage and large slip conditions. Based on these findings, relevant measures for the reasonable and optimized utilization of adhesion are derived.

When the third-body medium exists on the rail surface, the train should adopt the low-level service braking to avoid the braking skidding by extending the braking distance. Compared with the current adhesion control strategy of small creepage, adopting appropriate strategies to control the train’s adhesion coefficient near the second peak point of the adhesion coefficient-slip ratio curve in large slip can effectively improve the traction/braking adhesion redundancy and the upper limit of adhesion utilization, thereby ensuring the traction/braking performance and operation safety of the train.

Most existing studies focus on the wheel-rail adhesion coefficient values and variation patterns under different medium conditions, without considering whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train. Therefore, there is a risk of traction overspeeding/braking skidding. This study analyzes whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train and whether there is redundancy. Based on these findings, relevant measures for the reasonable and optimized utilization of adhesion are derived to further ensure operation safety of the train.

The purpose of this paper is to summarize the status and characteristics of rail technology of high-speed railway in China, and point out the development direction of rail technology of high-speed railway.

This study reviews the evolution of high-speed rail standards in China, comparing their chemical composition, mechanical attributes and geometric specifications with EN standards. It delves into the status of rail production technology, shifts in key performance indicators and the quality characteristics of rails. The analysis further examines the interplay between wheels and rails, the implementation of grinding technology and the techniques for inspecting rail service conditions. It encapsulates the salient features of rail operation and maintenance within the high-speed railway ecosystem. The paper concludes with an insightful prognosis of high-speed railway technology development in China.

The rail standards of high-speed railway in China are scientific and advanced, highly operational and in line with international standards. The quality and performance of rail in China have reached the world’s advanced level. The 60N profile guarantees the operation quality of wheel–rail interaction effectively. The rail grinding technology system scientifically guarantees the long-term good service performance of the rail. The rail service state detection technology is scientific and efficient. The rail technology will take “more intelligent” and “higher speed” as the development direction to meet the future needs of high-speed railway in China.

The development direction of rail technology for high-speed railway in China is defined, which will promote the continuous innovation and breakthrough of rail technology.

This study aims to improve the rules and regulations system of high-speed rail emergency disposal.

Based on the analysis of the demands, rules and regulations of China concerning on-site high-speed rail emergency disposal, basic principles for revising the regulations on railway technical management (RRTM) are proposed and suggestions and evaluation methods according to the main clauses are put forward.

Basic principles for revising the RRTM are proposed, namely “to meet the actual needs of on-site high-speed railway emergency disposal, standardize the emergency disposal process, improve the efficiency of emergency disposal and keep the consistency between provisions of emergency disposal”. Existing provisions related to emergency disposal efficiency, scenarios, safety and service quality are made up for the deficiencies. To make up for the deficiencies of the existing provisions related to emergency disposal efficiency, improvement of emergency disposal scenarios and guarantee of emergency disposal safety and quality, this paper puts forward suggestions on revising 15 emergency disposal provisions of the RRTM with regard to earthquake monitoring and warning, in-station foreign body invasion warning, air conditioning failure of EMU trains and forced parking of trains in sections. A fuzzy comprehensive evaluation model based on the analytic hierarchy process (AHP) is constructed to evaluate the proposed revision scheme and suggestions, which has been highly recognized by experts.

This study implements the goal of high-quality railway development.

This paper aims to provide top-level design and basic platform for intelligent application in China high-speed railway.

Based on the analysis for the future development trends of world railway, combined with the actual development needs in China high-speed railway, The definition and scientific connotation of intelligent high-speed railway (IHSR) are given at first, and then the system architecture of IHSR are outlined, including 1 basic platform, 3 business sectors, 10 business fields, and 18 innovative applications. At last, a basic platform with cloud edge integration for IHSR is designed.

The rationality, feasibility and implementability of the system architecture of IHSR have been verified on and applied to the Beijing–Zhangjiakou high-speed railway, providing important support for the construction and operation of the world’s first IHSR.

This paper systematically gives the definition and connotation of the IHSR and put forward the system architecture of IHSR for first time. It will play the most important role in the design, construction and operation of IHSR.

The study sought to examine the impacts of COVID-19 on tourism from the stakeholder perspective in the case of Famagusta town in Northern Cyprus.

Via a qualitative research approach, data are collected through face-to-face interviews from direct and indirect tourism stakeholders operating in Famagusta. A judgmental sampling strategy was employed to collect data from tourism stakeholders on the impacts of COVID-19 on tourism. Descriptive data analysis is engaged to report the results.

Results of the study showed that the novel coronavirus has hampered the tourism sector in Famagusta, Northern Cyprus. Indeed, as the globe suffered its effects in terms of economic gains, business and business closure. It has been the same with Famagusta, while a few private sectors positively gained (Internet and Technology), all other tourism-reliant sectors such as hotels, restaurants, travel agencies and the transport sector massively suffered as a result of the global lockdown due to COVID-19 pandemic.

Given the ever-changing state of knowledge and scarcity of literature, the current study seeks to summarize what has been learned from previous crises and back it up with qualitative research including senior industry stakeholders.