Search results

In many of today’s manufacturing industries, such as automobile, aerospace, defence, die and mould making, medical and electrical discharge machining (EDM) has emerged as an effective material removal process. In this process, a series of discontinuous electric discharges is used for removing material from the workpiece in the form of craters generating a replica of the tool into the workpiece in a dielectric environment. Appropriate selection of the tool electrode material and combination of input parameters is an important requirement for performance enhancement of an EDM process. This paper aims to optimize an EDM process using single-valued neutrosophic grey relational analysis using Cu-multi-walled carbon nanotube (Cu-MWCNT) composite tool electrode.

This paper proposes the application of grey relational analysis (GRA) in a single-valued neutrosophic fuzzy environment to identify the optimal parametric intermix of an EDM process while considering Cu-MWCNT composite as the tool electrode material. Based on Taguchi’s L9 orthogonal array, nine experiments are conducted at varying combinations of four EDM parameters, i.e. pulse-on time, duty factor, discharge current and gap voltage, with subsequent measurement of two responses, i.e. material removal rate (MRR) and tool wear rate (TWR). The electrodeposition process is used to fabricate the Cu-MWCNT composite tool.

It is noticed that both the responses would be simultaneously optimized at higher levels of pulse-on time (38 µs) and duty factor (8), moderate level of discharge current (5 A) and lower level of gap voltage (30 V). During bi-objective optimization (maximization of MRR and minimization of TWR) of the said EDM process, the achieved values of MRR and TWR are 243.74 mm³/min and 0.001034 g/min, respectively.

Keeping in mind the type of response under consideration, their measured values for each of the EDM experiments are expressed in terms of linguistic variables which are subsequently converted into single-valued neutrosophic numbers. Integration of GRA with single-valued neutrosophic sets would help in optimizing the said EDM process with the Cu-MWCNT composite tool while simultaneously considering truth-membership, indeterminacy membership and falsity-membership degrees in a human-centric uncertain decision-making environment.

This study aims to examine the determinants of ethical decision-making (EDM) of professional accountants in Sri Lanka, drawing on Rest’s (1986) four-component EDM model. The level of corporate collapses and fraud, coupled with the high level of corruption in Sri Lanka, has highlighted the importance and the timely nature of this research in the EDM processes of Sri Lankan accountants.

Data was collected from a sample of 315 accountants through a questionnaire survey that included four written ethical vignettes and was analysed using partial least square-structural equation modelling techniques.

The findings revealed a significant relationship between ethical awareness and ethical judgement, providing support for Rest’s model. However, the study does not support Rest’s model on the direct relationship between ethical judgement and ethical intention. Intrinsic religiosity and moral intensity significantly influenced the ethical awareness of accountants. Several determinants including accountants’ age, education, intrinsic religiosity, organisational ethical culture, familiarity with the professional ethical code and moral intensity influenced ethical judgement. However, the findings did not report any significant relationships between the study’s variables and ethical intention.

The study adds to the existing literature by providing a bigger picture of how various determinants work together in one EDM model and demonstrating that the EDM of accountants is multifaceted. The new finding on an insignificant relationship between ethical judgement and ethical intention implies that the Rest’s EDM process may be mediated and moderated by other constraints blocking accountants’ intention to act due to various pressures in a corrupt society, Sri Lanka, where accountants operate.

Documentation plays a key role in navigating the costs of construction projects. Traditional document management systems (TDMS) used in developing countries, however, hinder the achievement of expected cost targets. Although the electronic document management system (EDMS) has been implemented to improve documentation, the Sri Lankan construction industry has failed to effectively adapt to it. Hence, this study aims to provide strategies for the effective application of EDMS to the cost management of Sri Lankan mega construction projects.

This study uses a qualitative approach followed by 12 semi-structured expert interviews. Quantity surveying experts were selected through judgemental sampling. Manual content analysis was used to analyse the data.

The EDMS is more suitable for megaprojects than traditional methods of documentation in terms of functionality, neutrality, interoperability, space, reversibility and delivery speed. However, there are contradictory views about cost and security. Furthermore, five transitional challenges of EDMS have been identified under the three key themes of cost, stakeholder perception and technical difficulties. Four reasons were also identified as causing these five challenges. Seven suggestions were made to deal with these transitional challenges and three key feasible solutions for the Sri Lankan construction industry regarding the EDMS were identified. Development of Sri Lankan software with low initial cost was highlighted as the most feasible solution.

This is a novel study to investigate the applicability of EDMS to cost management mechanisms of megaprojects in Sri Lanka. The findings reveal transitional challenges and appropriate feasible solutions for EDMS adaptation. This can be applied to the cost management of megaprojects in other developing countries as well.

This study aims to review earned value management (EVM)-relative methods, including the original EVM, earned schedule method (ESM) and earned duration management (EDM(t)). This study then proposes a general implementation procedure and some basic principles for the selection of EVM-relative methods.

After completing an intensive literature review, this study conducts a case study to examine the forecasting performance of project duration using the EVM, ESM and EDM(t) methods.

When the project is expected to finish on time, ESM with a performance factor equal to 1 is the recommended method. EDM(t) would be the most reliable method during a project's entire lifetime if EDM(t) is expected to be delayed based on past experience.

As this research conducts a case study with only one building construction project, the results might not hold true for all types of construction projects.

EVM, ESM and EDM(t) are simple and data-accessible methods. With the help of a general implementation procedure, applying all three methods would be better. The power of the three methods is definitely larger than that of choosing only one for complex construction projects.

Previous studies have discussed the advantages and disadvantages of EVM, ESM and EDM(t). This study amends the available outcomes. Thus, for schedulers or researchers interested in implementing EVM, ESM and EDM(t), this study can provide more constructive instructions.

This study aims to understand the current production scenario emphasizing the significance of green manufacturing in achieving economic and environmental sustainability goals to fulfil future needs; to determine the viability of particular strategies and actions performed to increase the process efficiency of electrical discharge machining; and to uphold the values of sustainability in the nonconventional manufacturing sector and to identify future works in this regard.

A thorough analysis of numerous experimental studies and findings is conducted. This prominent nontraditional machining process’s potential machinability and sustainability challenges are discussed, along with the current research to alleviate them. The focus is placed on modifications to the dielectric fluid, choosing affordable substitutes and treating consumable tool electrodes.

Trans-esterified vegetable oils, which are biodegradable and can be used as a substitute for conventional dielectric fluids, provide pollution-free machining with enhanced surface finish and material removal rates. Modifying the dielectric fluid with specific nanomaterials could increase the machining rate and demonstrate a decrease in machining flaws such as micropores, globules and microcracks. Tool electrodes subjected to cryogenic treatment have shown reduced tool metal consumption and downtime for the setup.

The findings suggested eco-friendly machining techniques and optimized control settings that reduce energy consumption, lowering operating expenses and carbon footprints. Using eco-friendly dielectrics, including vegetable oils or biodegradable dielectric fluids, might lessen the adverse effects of the electrical discharge machine operations on the environment. Adopting sustainable practices might enhance a business’s reputation with the public, shareholders and clients because sustainability is becoming increasingly significant across various industries.

A detailed general review of green nontraditional electrical discharge machining process is provided, from high-quality indexed journals. The findings and results contemplated in this review paper can lead the research community to collectively apply it in sustainable techniques to enhance machinability and reduce environmental effects.

The purpose of this study is to explore the machining characteristics of electrical discharge machining (EDM) when a tool is fabricated using powder metallurgy. Because pure Cu tools obtained using conventional machining pose problems of high tool wear rate, tool oxidation causes loss of characteristics in tool shape.

The research investigation carried out experiments planned through Taguchi’s robust design of experiments and used analysis of variance (ANOVA) to carry out statistical analysis.

It has been found that copper and chromium electrodes give less metal removal rate as compared to the pure Cu tool. Analytical outcomes of ANOVA demonstrated that MRR is notably affected by the variable’s polarity, peak current, pulse on time and electrode type in the machining of EN9 steel with EDM, whereas the variables pulse on time, gap voltage and electrode type have a significant influence on EWR. Furthermore, the process also showed that the use of powder metallurgy tool effectively reduces the value of SR of the machined surface as well as the tool wear rate. The investigation exhibited the possibility of the use of powder metallurgy electrodes to upgrade the machining efficiency of EDM process.

There is no major limitation or implication of this study. However, the composition of the powders used in powder metallurgy for the fabrication of tools needs to be precisely controlled with careful control of process variables during subsequent fabrication of electrodes.

To the best of the authors’ knowledge, this is the first study that investigates the effectiveness of copper and chromium electrodes/tools fabricated by means of powder metallurgy in EDM of EN9 steel. The effectiveness of the tool is assessed in terms of productivity, as well as accuracy measures of MRR and surface roughness of the components in EDM machining.

This paper aims to understand employees’ propensity to blow the whistle in two East African countries. This study develops a model of ethical decision-making (EDM) to assist management in predicting the probability of whistleblowing in Kenya and Uganda. It also seeks to find the moderating effect of perceived retaliation on whistleblowing intention.

This study administers a standardized questionnaire to employees in Kenya and Uganda to measure their perceptions about whistleblowing in their organizations. This study uses partial least square structural equation modeling to test the hypotheses. This study uses four constructs, namely, awareness, judgment, retaliation and likelihood, of blowing the whistle. These constructs are measured with multiple-item scales.

The results show that ethical awareness and judgment significantly increase willingness to engage in whistleblowing in East Africa. However, this study does not find a significant retaliation effect on whistleblowing intention. Instead, this study finds that awareness and judgment mediate between retaliation and willingness to engage in whistleblowing.

This study contributes to EDM topics. It advances the understanding of the whistleblowing concept, the retaliation effect and the reasons to encourage blowing the whistle in Africa. However, this study did not consider cultural factors, such as nationality, patriotism and ethnicity. Moreover, the results are only based on data from Uganda and Kenya and may not apply to other sub-Saharan nations.

These findings are particularly significant for managers and policymakers in East Africa, where fear of retaliation and lack of awareness are the main barriers to whistleblowing. The results may help managers develop human resource practices to include policies to support moral behavior. It may also provide insights to the policymakers to understand the factors that facilitate whistleblowing practices and help them to adopt new strategies or policies to stimulate whistleblowing culture.

This study is one of the initial empirical studies in the East Africa context to explore the EDM predictors and the impact of retaliation on the whistleblowing intention.

This study highlights the crucial significance of stakeholder participation in the creation of a comprehensive energy and electrical master plan for Mozambique. The purpose of this study is to deliver a practical insights that transcend theoretical concerns by digging into the subtleties of stakeholder relationships and strategic collaborations, paving the path for pragmatic and meaningful solutions that connect with real-life conditions. This debate lays the groundwork for educated decision-making, propelling Mozambique’s energy industry towards a more sustainable and prosperous future.

The study used a combined approach of stakeholder analysis (SA) and social network analysis (SNA) to enhance our understanding of the stakeholder landscape in Mozambique’s energy sector. This methodological approach offers a unique vantage point to examine the individual stakeholders’ roles and the intricate web of connections, partnerships, collaborations and information-sharing activities. By integrating SA and SNA, this study aims to provide a more comprehensive and dynamic depiction of stakeholder interactions, contributing methodologically to the existing body of literature.

The findings also highlight the need to develop frameworks that promote private investment and joint endeavours with entities such as Cahora Bassa Dam/Mozambique Transmission Company. A consistent legal framework ensures uniform performance and a robust monitoring system for ongoing projects, improving accountability and progress tracking. Furthermore, the discussion includes enhancing the competence of the regulatory agency regulating the electricity industry. This includes tackling complex concerns with electricity pricing and other regulatory aspects relevant to private investment. A highly empowered regulatory agency is critical to creating an atmosphere conducive to long-term private sector involvement.

While the study emphasises the need to integrate multiple stakeholders, it may not detail specific issues or impediments that may develop during the engagement process. Additional research could look into potential tensions or barriers to effective collaboration. Furthermore, the study emphasises the necessity of addressing environmental impacts; it must thoroughly examine specific environmental concerns such as carbon emissions, deforestation or renewable energy possibilities. Future research could assess the suggested policies’ environmental impact more extensively. Additionally, while the conclusion briefly mentions economic prosperity, a more thorough consideration of the possible economic and social implications of various energy policies could provide a greater understanding of their practicality and potential benefits.

In terms of practical contributions, this study aspires to shed light on how stakeholder interactions can shape energy policy interventions that ensure reliable and affordable energy sources for economic development and societal well-being. By unveiling the complex network of relationships and partnerships, this study seeks to provide actionable insights for policymakers, industry players and other stakeholders involved in Mozambique’s energy sector. By taking this action, this research aims to pave the way for more effective and inclusive energy policies that align with circular economy principles, thus addressing a critical need in scholarly discourse and practical implementation.

The study underscores the critical role of energy stakeholders in shaping energy policies and projects, given their influential positions and impact on decision-making processes. While existing literature acknowledges this influence, a discernible research gap exists in comprehensively understanding how stakeholder interactions and collaborations in the energy sector affect policy interventions within a context such as Mozambique. This study seeks to bridge this gap by delving into the intricacies of stakeholder involvement and its implications for energy policy development in Mozambique.

Information management workflow in building information modelling (BIM)-based collaboration is based on using a common data environment (CDE). The basic premise of a CDE is exposing all relevant data as a single source of truth and facilitating continuous collaboration between stakeholders. A multitude of tools can be used as a CDE, however, it is not clear how the tools are used or if they fulfil the users’ needs. Therefore, this paper aims to investigate current practices of using CDEs for information management during the whole built asset’s life cycle, through a state-of-the-art literature review and an empirical study.

Literature data is collected according to the PRISMA 2020 guideline for reporting systematic reviews. This paper includes 46 documents in the review and conduct a bibliometric and thematic analysis to identify the main challenges of digital information management. To understand the current practice and the views of the stakeholders using CDEs in their work, this paper used an empirical approach including semi-structured interviews with 15 BIM experts.

The results indicate that one of the major challenges of CDE adoption is project complexity and using multiple CDEs simultaneously leading to data accountability, transparency and reliability issues. To tackle those challenges, the use of novel technologies in CDE development such as blockchain could be further investigated.

The research explores the major challenges in the practical implementation of CDEs for information management. To the best of the authors’ knowledge, this is the first study on this topic combining a systematic literature review and fieldwork.

There is a wealth of value hidden in regional cultural heritage, but its preservation status is not optimistic. This study introduces a method that focuses on the inherent cultural value of regional cultural heritage to preserve it by value construction and release.

Based on the great value of regional cultural heritage due to spatial adjacency and temporal continuity, this paper focuses on its inherent cultural value to explore the preservation path and chooses Shichahai cultural heritage digital resources for a case study. This paper draws lessons from the narrative method of ancient Chinese historiography, constructs a cultural space and tells cultural stories. A linked data organization model for digital resources is created to construct a conceptual cultural space. Then, the space is materialized by linked dataset creation. The authors tell cultural stories discovered from the space, which are presented by various user interfaces using visualization technologies.

A cultural space promotes the development of a fine-grained description of regional cultural heritage and aids in relationship discovery to enhance the value construction ability. Additionally, storytelling via interactive user interfaces is helpful in the utilization and dissemination of knowledge extracted from a cultural space and enhances the value release of regional cultural heritage. In this way, a path with the inherent cultural value of regional cultural heritage as the core is established, and preservation is achieved.

This study focuses on the inherent cultural value of regional cultural heritage and proposes a new path to preserve these resources. This approach will enrich research on the preservation of regional cultural heritage and contribute to the construction and release of its cultural value.