Search results

This paper aims to formulate a new metal working fluid (MWF) composition including some eco-friendly emulsifiers, corrosion inhibitor, biocide, and non- edible vegetable oil (castor oil) as the base oil. To achieve this aim, five MWFs with different hydrophilic–lipophilic balance (HLB) value as 10, 9.5, 9, 8.5 and 8 were prepared to identify the optimum HLB value that gives a highly stable oil-in-water emulsion. The performance of castor oil based MWF was evaluated using tool chip tribometer and drill dynamometer. The surface morphology of steel disc and friction pin was performed using scanning electron microscope (SEM) and 3D profilometer. The results revealed that the use of the prepared cutting fluid (E1) caused the cutting force to decrease from 500 N for dry high-speed steel sample to 280N, while the same value for a commercial cutting fluid (COM) was recorded as 340 N at drilling speed and cutting feed force as 1120 rpm and 4 mm/min., respectively.

A castor oil-based metalworking fluid was prepared using nonionic surfactants. The composition of the metalworking fluid was further optimized by adding performance-enhancing additives. The performance of castor oil based MWF was analyzed using Tool chip tribometer and Drill dynamometer. The surface morphology of steel ball and a disc was done using 3D profilometer and SEM.

Studies revealed that castor oil-based MWF having Monoethanolamine (MEA) as corrosion inhibitor was found to be highly stable. The drilling dynamometer and tool chip tribometer studies showed that castor oil-based MWF performance was comparable to that of commercial MWF.

This study aims to explore the performance of the castor oil based metalworking fluid (MWF) using tool chip tribometer and drill dynamometer.

The conventional MWFs are petroleum derives and are unsustainable. Use of non-edible plant-based oils for preparing the MWF will not only be conserved environment but also add value addition to agricultural crops.

The social Implications is aiming to decrease the environmental impact that results from the using of mineral cutting fluids.

The originality of this work is to replace the mineral oil and synthetic oil based cutting fluids with more eco-friendly alternatives one. In addition, the investigation will focus on developing functional additives required for cutting fluids which are environmentally benign.

Poor maintenance management leads to non-negligible economic, environmental and social impacts and obstacles to the sustainable manufacturing paradigm. Studies evaluating maintenance impacts on sustainability underline growing interest in the topic, but reports on the industrial field are lacking. Therefore, this paper investigates the industrial environment and the indicators that manufacturing companies use for measuring their maintenance impacts.

In this pilot survey study, several stakeholders of production enterprises in the south of Italy were interviewed to unveil the spread of the measurement of maintenance impacts on sustainability and the indicators used by those companies.

The interview results showed a low level of awareness among stakeholders about maintenance impacts on sustainability. Maintenance stakeholders are mainly focused on technical and economic factors, whereas environmental, quality and safety stakeholders are becoming more aware of maintenance impacts on environmental and social factors. However, both groups need guidelines to define sustainability indicators to assess such impacts.

This exploratory study allowed us to investigate the current situation in industrial organisations and achieve the first variegated and diversified vision of the awareness of company stakeholders on maintenance impacts on the sustainability of several business functions. This paper provides a valuable contribution to “maintenance and sustainability” research area in production contexts and sheds light on non-negligible maintenance impacts on sustainability, providing preliminary insights on the topic and an effective basis for defining future research opportunities. Moreover, this study enables increased awareness among internal and external manufacturing company stakeholders on the role of maintenance in sustainable production.

This study aims to understand the role that family protocol can have in the succession planning process of family businesses.

For this purpose, the authors decided on a qualitative approach and performed an exploratory case study in Portugal: one firm with a family protocol. As data collection techniques, interviewing, direct observation and documentary analysis were used.

Based on the empirical evidence, it is concluded that a family protocol can help succession planning and favour the continuity and survival of the family business.

This study shows the relevance of a family protocol for the succession process that seems to be at the basis of family firms’ continuity, survival and minimising their failure.

Although family firms are many in number and central in the dynamics of the world economy, the family protocol has not been approached as a determinant of a successful succession process. This holds particularly for the realm of family firms.

This paper develops general purpose programmes for an electronic digital computer for use when the Argyris Matrix Method of Structural Analysis is employed. Programmes for both the force and displacement methods are given and they apply for arbitrarily large structures. The procedure to be followed in the particular case of the structural analysis of a delta wing is outlined and the advantages of using magnetic tape storage are considered.

This paper aims to study consumers’ visual attention and emotional experience with clothing design factors and their combinations from the perspective of cognition and emotion and propose an interaction phenomenon to evaluate the combined effect of clothing factors to better guide online clothing design and sales.

An eye movement physiology experiment was conducted, 33 participants screened by questionnaires were invited for this experiment. Hypotheses of visual attention were verified by the FIRST_FIXATION_TIME indicator, DWELL_TIME indicator and FIXATION_COUNT indicator. Hypotheses of emotional experience were verified by the PUPIL_SIZE indicator.

First, on the product list page, it is better to use only the three factors of clothing and a small number of stimulating factors. Second, when the stimulus is consistent with the cognitive task performed by the consumer, the efficiency of the task and the consumer's user experience will be improved. Third, the positive interaction phenomenon of clothing design factors and their combinations could significantly attract consumers' visual attention and improve their emotional experience.

This work argues consumer interest and emotional experience with online clothing can be expressed through eye movement physiological indicators, and the concept of interaction was proposed to evaluate the design and display of online clothing.

This paper conducted interaction research on online clothing design factors and their combinations from the perspective of cognition and emotion, which provided an objective quantitative method for online clothing designers and online clothing retailers.

This chapter uses an intellectual capital (IC) qualitative approach for assessing the bio health technologies entrepreneurial ecosystem of a university located in Southern Europe, aiming to identify the role played by IC in fostering the sustainable success of the entrepreneurial ecosystem. There has been limited research dedicated to deepening the knowledge of the entrepreneurial ecosystems’ dimensions, using an IC lens, in the context of university cities with different dimensions. Small cities may not have some dimensions, so developed, comparing with the ones of the ecosystems of large urban centers. This chapter uses a qualitative approach funded in a case study exploring internal and external stakeholders of a Portuguese entrepreneurial ecosystem, UBImedical, targeted at the bio health sector. The study is part of an exploratory study funded in the scope of a European Project, aiming to explore in a pioneering way the application of the dominant triad of capitals forming IC and, thus, identifying and understanding the dimensions of different entrepreneurial ecosystems. The case study reveals that the IC’s dimensions more critical for the success of the bio health entrepreneurial ecosystems are the structural capital and the relational capital, although human capital is perceived as a basic prerequisite for fostering the entrepreneurial ecosystem’s performance. The results are funded in primary and qualitative data collected from the interviews developed to previously identified external and internal stakeholders of this type of entrepreneurial ecosystem under study.

As one of the tomographic imaging techniques, electrical capacitance tomography (ECT) is widely used in many industrial applications. While most ECT sensors have electrodes placed around a cylindrical chamber, the planar ECT sensor has been investigated for depth and defect detection. However, the planar ECT sensor has limited height and depth sensing capability due to its single-sided assessment with the use of only a single-plane design. The purpose of this paper is to investigate a dual-plane miniature planar 3D ECT sensor design using the 3 × 3 matrix electrode array.

The sensitivity map of dual-plane miniature planar 3D ECT sensor was analysed using 3D visualisation, the singular value decomposition and the axial resolution analysis. Then, the sensor was fabricated for performance analysis based on 3D imaging experiments.

The sensitivity map analysis showed that the dual-plane miniature planar 3D ECT sensor has enhanced the height sensing capability, and it is less ill-posed in 3D image reconstruction. The dual-plane miniature planar 3D ECT sensor showed a 28% improvement in reconstructed 3D image quality as compared to the single-plane sensor set-up.

The 3 × 3 matrix electrode array has been proposed to use only the necessary electrode pair combinations for image reconstruction. Besides, the increase in number of electrodes from the dual-plane sensor setup improved the height reconstruction of the test sample.

The purpose of this paper is to investigate the microstructures, slag inclusions, morphology and composition of ancient Chinese iron coins exhumed from Emei Mountain and Baoji after 818‐966 years of being imbedded underground.

Metallography, scanning electron microscopy, energy dispersive spectrometry, X‐ray photoelectron spectrometry and Fourier transform infrared spectroscopy were employed.

The results showed that archaeological coins exhibited characteristics of a typical hypoeutectic white cast iron, with slag inclusions of FeS strips and phosphate. Porous or hexagonal platey corrosion products were discovered on the archaeological iron coin, which were mainly identified as Fe₂O₃, FeOOH, Fe_x(OH)_1−xCO₃ and Fe_x(OH)_1−xSO₄. The possible corrosion mechanisms for the iron coins were discussed based on the corrosion products.

This study revealed the characterization of corrosion products on archaeological iron coins and may provide guidance for the preservation of archaeological iron.

The purpose of this paper is to establish the minimum thickness required to provide stab protection in accordance with the United Kingdom Home Office Scientific Development Branch (HOSDB) standards while testing a series of laser sintered (LS) planar specimens using instrumented test apparatus.

Planar test specimens were LS in single-layer thicknesses ranging from 1.00 to 15.00 mm in four material powder categories – DuraForm® virgin, DuraForm 50/50 mix, DuraForm EX® virgin and DuraForm EX 50/50 mix. All specimens were tested using instrumented drop test apparatus and were impacted with established Stanley Tools 1992 trimming blades to the UK HOSDB KR1-E1 stab impact energy level.

The research demonstrated that a minimum single planar specimen thickness of 11.00 mm, manufactured from DuraForm EX 50/50 mix powder, was required to provide protection against the HOSDB KR1-E1 level of stab impact energy. The alternative powder mixes tested within this experiment demonstrated poor levels of stab protection, with virgin powder specimens demonstrating no protection up to 15.00 mm, whereas DuraForm 50/50 mix specimens demonstrating inconsistent performances.

This paper enhances on existing literature surrounding the manufacturing and testing of additive manufacturing (AM) stab-resistant armour by adding further rigour to the testing of AM body armour specimens. In addition, this research establishes key foundation characteristics which could be utilised for the future development of bespoke AM body armour garments.

One of the distinctive features in Korea and the U.S. trucking industries is the huge difference in the share of owner-operators. While it is around 10~15 percent in the U.S., 80~90% of drivers operate their own truck in Korea. Different from historical explanations of previous researches, this paper deals with this feature theoretically. We examine what brings the difference in asset ownership structures between the Korean and the U.S. trucking industries. Using an analytic framework, we investigate the determinants of truck ownership and the changes in ownership patterns. The model introduces several parameters related to productivities of drivers’ efforts and contractibility to affect drivers’ decision, and values of these parameters in both countries are discussed qualitatively and found to be consistent with the aforementioned characteristics.