Search results

1 – 10 of over 1000
To view the access options for this content please click here
Article
Publication date: 1 June 1996

E.A.M Youssef

Highly efficient heat‐resistant paint formulations based on Egyptian manganese ore (high and medium grades) and silicon resin were prepared. The heat‐resistance efficiency…

Abstract

Highly efficient heat‐resistant paint formulations based on Egyptian manganese ore (high and medium grades) and silicon resin were prepared. The heat‐resistance efficiency as well as the physico‐mechanical properties of the painted films were evaluated. Promising results were deduced, showing that manganese ore imparts heat‐resistance protection for painted substrate up to 450°C. The anticorrosive properties of these paint formulations were moderate but their efficiency as heat‐resistant anticorrosive paints was improved by adding 1 per cent of melamine to the paint constituents.

Details

Anti-Corrosion Methods and Materials, vol. 43 no. 6
Type: Research Article
ISSN: 0003-5599

To view the access options for this content please click here
Article
Publication date: 1 August 2003

E.A.M. Youssef, D.E. El‐Nashaar and M.A. Abd El‐Ghaffar

Itaconic acid was reacted with phenylene diamine (ortho, meta and para) and o‐tolidine in boiling dekalin, using Dean and Stark apparatus. The polymers prepared were…

Abstract

Itaconic acid was reacted with phenylene diamine (ortho, meta and para) and o‐tolidine in boiling dekalin, using Dean and Stark apparatus. The polymers prepared were evaluated for their suitability as antioxidants for natural rubber vulcanizates. The amide polymers prepared showed high efficiency as antioxidants for rubber vulcanizates, exceeding the performance of commercial antioxidants. In addition, the results obtained are encouraging and support the use of these polymers from both the environmental and economical points of view.

Details

Pigment & Resin Technology, vol. 32 no. 4
Type: Research Article
ISSN: 0369-9420

Keywords

To view the access options for this content please click here
Article
Publication date: 1 February 1997

AA.M.A. Nada, E.A.M. Youssef and K.N. Abdel‐Nour

Presents findings from a study of the effects of treating unbleached bagasse paper sheets with different resin solutions. Unbleached kraft bagasse paper sheets were…

Abstract

Presents findings from a study of the effects of treating unbleached bagasse paper sheets with different resin solutions. Unbleached kraft bagasse paper sheets were treated with different resin solutions such as nitrocellulose, melamine formaldehyde, silicone, short and medium alkyd resin and the physico‐mechanical properties of the modified paper sheets were tested. The strength properties of treated paper sheets were highly improved especially in the case of treatment with melamine formaldehyde and silicone resin solutions. The effect of dipping time of paper sheets in different concentrations of resin solution on the strength properties was also investigated. Physico‐mechanical properties of thermally treated modified paper sheets with resins were also clarified. Concludes that promising results in the improvement of insulation of treated paper sheets with resin are obtained by studying the dielectric‐electric properties.

Details

Pigment & Resin Technology, vol. 26 no. 1
Type: Research Article
ISSN: 0369-9420

Keywords

To view the access options for this content please click here
Article
Publication date: 1 June 1996

M.A. Abd El‐Ghaffar, E.A.M. Youssef, M.M.H. Abo‐Shosa and N.A. Ibrahim

Modifies short and medium alkyd resins using perfluori‐nated urethane toluene isocyanate (PFUTI), and incorporates the modified resins in a set of paint formulations…

Abstract

Modifies short and medium alkyd resins using perfluori‐nated urethane toluene isocyanate (PFUTI), and incorporates the modified resins in a set of paint formulations containing different ratios of zinc phosphate as an inhibitive pigment. Achieves promising results and illustrates corrosion‐protective properties in various paint formulations and also a paint formulation free of the inhibitive pigment. Shows enhancement of the corrosion protection efficiencies by the improvement in the hydrophobicity of alkyd resin modified with PFUTI. In view of these results, minimizes or neglects the most expensive inhibitive pigments from an economical standpoint.

Details

Pigment & Resin Technology, vol. 25 no. 6
Type: Research Article
ISSN: 0369-9420

Keywords

To view the access options for this content please click here
Article
Publication date: 1 February 1990

A.A. Abd El‐Hakim, M.A. Abd El‐Ghaffar, M.M. Abd El‐Malek and E.A.M. Youssef

Results and discussion Adsorption isotherms of stearic acid on the surface of manganese ore samples:

Abstract

Results and discussion Adsorption isotherms of stearic acid on the surface of manganese ore samples:

Details

Anti-Corrosion Methods and Materials, vol. 37 no. 2
Type: Research Article
ISSN: 0003-5599

To view the access options for this content please click here
Article
Publication date: 1 June 1996

M.A. Abd El‐Ghaffar, E.A.M. Youssef, M.M.H. Abo‐Shosha and N.A. Ibrahim

Short and medium alkyd resins were modified using perfluorinated urethane toluene isocyanate (PFUTI). The modified resins were incorporated in a set of paint formulations…

Abstract

Short and medium alkyd resins were modified using perfluorinated urethane toluene isocyanate (PFUTI). The modified resins were incorporated in a set of paint formulations containing different ratios of zinc phosphate as an inhibitive pigment. Promising results were achieved and corrosion protective properties were illustrated in various paint formulations and also in a paint formulation free of the inhibitive pigment. The corrosion protection efficiencies were enhanced by the improvement in the hydrophobicity of alkyd resin modified with perfluorinated toluene isocyanate (PFUTI). These results encourage us to minimize or neglect the most expensive inhibitive pigments from the economic point of view.

Details

Anti-Corrosion Methods and Materials, vol. 43 no. 6
Type: Research Article
ISSN: 0003-5599

To view the access options for this content please click here
Article
Publication date: 1 February 1997

This article has been withdrawn as it was published elsewhere and accidentally duplicated. The original article can be seen here: 10.1108/eb007406. When citing the…

Abstract

This article has been withdrawn as it was published elsewhere and accidentally duplicated. The original article can be seen here: 10.1108/eb007406. When citing the article, please cite: E.A.M Youssef, (1996), “Heat-resistant anticorrosive paints based on Egyptian manganese ore”, Anti-Corrosion Methods and Materials, Vol. 43 Iss: 6, pp. 17 - 21.

Details

Pigment & Resin Technology, vol. 26 no. 1
Type: Research Article
ISSN: 0369-9420

To view the access options for this content please click here
Article
Publication date: 1 December 2004

R.A. El‐Adly, E.A.M. Youssef, S.M. El‐Sayed and M.A. Abd El‐Ghaffar

This paper reports on the preparation of six formulations (G1‐G6) containing mixed soap greases based on cotton soap stock, aromatic extract, heavy alkylate and lube base…

Abstract

This paper reports on the preparation of six formulations (G1‐G6) containing mixed soap greases based on cotton soap stock, aromatic extract, heavy alkylate and lube base oil. The physicochemical properties of these ingredients were characterised. The consistency, dropping point and mechanical stability of the formulated greases were assessed and tested in accordance with the National Laboratory for Grease Institute standards, and compared with the Egyptian Standards. The properties of the formulated grease G4 proved to be the best. The work reported also includes preparation of itaconyl‐o‐tolidine‐, itaconyl bisaniline‐ and itaconyl m‐phenylene‐ amide polymers. The structure of these polymers was investigated using infrared spectroscopy, micro analysis and gel permeation chromatography. The polymers prepared were evaluated as antioxidants for the optimum formulated grease G4. The study revealed that the itaconyl m‐phenylene amide polymer was a weak antioxidant, while itaconyl bisaniline‐ and itaconyl‐o‐tolidine amide polymers showed good anti‐oxidation property.

Details

Pigment & Resin Technology, vol. 33 no. 6
Type: Research Article
ISSN: 0369-9420

Keywords

To view the access options for this content please click here
Article
Publication date: 6 July 2010

M.A. Abd El‐Ghaffar, N.A. Abdelwahab and E.A.M. Youssef

The purpose of the paper is to examine the synthesis of polyaniline (PAn) and poly(m‐toluidine) (PmT) via an inverse emulsion polymerisation pathway and evaluate of the…

Abstract

Purpose

The purpose of the paper is to examine the synthesis of polyaniline (PAn) and poly(m‐toluidine) (PmT) via an inverse emulsion polymerisation pathway and evaluate of the synthesised polymers as corrosion inhibitors for steel protection in surface coatings.

Design/methodology/approach

PAn and PmT were prepared by inverse emulsion polymerisation using ammonium persulphate as an initiator and sodium dodecylbenzene sulphonate (SDBS) as an emulsifier. Spectrophotometric measurements were conducted to characterise the prepared polymers. Latex paint formulations were prepared and dry paint films were evaluated for their physical, mechanical and corrosion protection performance.

Findings

The prepared conducting polymers of PAn and PmT are good candidates for enhancing the corrosion protection of steel. They showed good performance as corrosion inhibitors in latex paints without bad side effects on the physico‐mechanical properties of paint films.

Practical implications

Recent advances in corrosion protection of steel by coatings via inverse emulsion polymerisation of aniline and m‐toluidine have improved performance of anti‐corrosive water‐borne paints. Using formulations based on this new technology, offer uncompromised high performance eco‐friendly anti‐corrosive water‐borne systems that answer the future industrial demands from the economical and environmental points of view.

Originality/value

PAn and PmT prepared by inverse emulsion polymerisation showed promising results as corrosion inhibitors for steel protection. The polymerisation process was conducted in water (emulsion polymerisation) and the polymer lattices were incorporated in water borne paints from ecological and economical points of view.

Details

Pigment & Resin Technology, vol. 39 no. 4
Type: Research Article
ISSN: 0369-9420

Keywords

To view the access options for this content please click here
Article
Publication date: 1 October 1988

M.A. Abd El‐Ghaffar, A.Z. Gomaa, M.M. Abd El‐Malek, E.A.M. Youssef and A.A. Abd El‐Hakim

The corrosion protective properties of the primer films prepared from Egyptian manganese ore (high and medium grades) and epoxy resin have been determined by immersing…

Abstract

The corrosion protective properties of the primer films prepared from Egyptian manganese ore (high and medium grades) and epoxy resin have been determined by immersing coated films in artificial sea water for 28 days. The good corrosion protective properties indicate that the Egyptian manganese ore can be satisfactorily used in anticorrosive primer formulations for steel surface protection.

Details

Anti-Corrosion Methods and Materials, vol. 35 no. 10
Type: Research Article
ISSN: 0003-5599

1 – 10 of over 1000