Search results

Scenarios have become a vital methodological approach in business as well as in public policy. When scenarios are used to guide analysis and decision-making, the aim is typically robustness and in this context we argue that two main problems at scenario set level is conservatism, i.e. all scenarios are close to a perceived business-as-usual trajectory and lack of balance in the sense of arbitrarily mixing some conservative and some extreme scenarios. The purpose of this paper is to address these shortcomings by proposing a methodology for generating sets of scenarios which are in a mathematical sense maximally diverse.

In this paper, we develop a systematic methodology, Scenario Diversity Analysis (SDA), which addresses the problems of broad span vs conservatism and imbalance. From a given set of variables with associated states, SDA generates scenario sets where the scenarios are in a quantifiable sense maximally different and therefore best span the whole set of feasible scenarios.

The usefulness of the methodology is exemplified by applying it to sets of storylines of the emissions scenarios of the Intergovernmental Panel on Climate Change. This ex-post analysis shows that the storylines were not maximally diverse and given the challenges ahead with regard to emissions reduction and adaptation planning, we argue that it is important to strive for diversity when developing scenario sets for climate change research.

The proposed methodology adds significant novel features to the field of systematic scenario generation, especially with regard to scenario diversity. The methodology also enables the combination of systematics with the distinct future logics of good intuitive logics scenarios.

The purpose of this paper is to identify and explore important quality-related challenges facing organizations, and investigate how current excellence models incorporate these challenges.

The paper is based on a Delphi study of Swedish organizations. Forty-nine challenges were generated and ranked according to importance and the ten top-ranked challenges were compared to the principles of four excellence models.

The excellence models still seem to be relevant since their content matches many of the identified challenges. The Malcolm Baldrige National Quality Award and the Swedish Institute for Quality models were found to have the most comprehensive coverage, while the International Organization for Standardization model had limited coverage.

Three areas for further research were identified: first, how quality management (QM) can evolve in different contexts that have varying needs in terms of adaptive and explorative capabilities; second, the interfaces of QM and sustainability, and ways to understand how customers and stakeholders can be active contributors to improvements; and third, the roles of the owners and board of directors regarding QM, and how to organize and distribute responsibilities of the QM work.

There are three important challenges that future revisions of excellence models could address: first, making QM a strategic issue for company owners; second, involving customers in the improvement activities; and third, developing processes that are robust yet still easily adaptable.

The Delphi study identified upcoming challenges in the QM area based on input from 188 quality professionals.

Strategic changes in an organization will face challenges not only related to the changes as such but also with regard to how the vision of the future is interpreted and understood by the organization. Visual management is a field of research that could contribute to change management research as a means to facilitate management of the dynamics in a change process and to facilitate the process of communication. The purpose of this paper is to problematize episodic change processes with regard to communication and to contribute with a proposed model on how to facilitate dynamic strategic change management using visual management.

The paper uses an interdisciplinary approach by linking change management literature to visual communication to be used for visual management.

A proposed model presents how a dynamic episodic change process can be managed in terms of visual management, potential pitfalls to avoid, and what ambidextrous capabilities are needed throughout the complete episodic change.

The proposed model is still yet theoretical, based on a literature review of dynamic change management and visual communication. Future research will validate the model in practice to confirm its robustness.

An implementation of visual management in Kotter’s (1995) eight steps on how to strategically manage change in combination with theories on ambidexterity and episodic change is suggested.

The paper contributes to how visual management can support change management by combining visual communication and change management.

The purpose of this paper is to identify client‐perceived barriers to a change towards increased client influence on the end result of the construction process. Additionally, the variables of size of clients' markets and the extent of external project management are investigated in order to see how they influence the perceptions concerning important barriers to change.

Empirical data were collected through a survey responded to by 87 Swedish construction clients.

Identified barriers are divided into three types: attitudinal, industrial and institutional. Attitudinal barriers (adversarial attitudes, lack of ethics and morality, focus on projects instead of processes and a short‐term focus) and industrial barriers (traditional organization of the construction process, conservative industry culture, industry structure and traditional production processes) are perceived to be important, whereas institutional barriers (standard contracts, laws and traditional procurement procedures) are not perceived to be critical. Each different type of barrier is tested against the use of internal or external project management and the sphere of activity of the client. Attitudinal barriers are perceived as being more critical by clients using external project management. “Nearness” in terms of the sphere of activity (e.g. how large is the client's market?) also has an effect on how clients perceive the barriers. Locally, active clients do not consider attitudinal barriers to be as influential on the end result of the construction process as nationally active clients.

Since the empirical results are based on data collected only from Swedish clients, international generalizations should be made with caution.

Clients wishing to act as change agents need to be aware that their use of internal versus external project management affects their chances to influence the other construction actors and implement change and innovation. Large national and international client organizations, which due to their size have significant opportunities to influence the industry, rely heavily on external project management, which may hamper their change agent role. Hence, such clients should make careful and purposeful selections of project management companies. Another more influential alternative is to strengthen their organisation and rely less on external project management.

This paper presents a unique investigation of the connections between the use of internal/external project management and perceived barriers to change.

Improving construction supply chain collaboration and performance is central for achieving short‐term business objectives as well as long‐term competitive advantage. Lean thinking is an approach that has been adopted in many different industrial settings as a means for improving supply chain performance. In the project‐based construction industry, lean thinking has, however, not yet been widely adopted. The purpose of this paper is to increase the understanding of how various aspects of lean thinking can be implemented in a construction project and how they affect supply chain actors and their performance.

Action research was performed in a case study of a lean construction pilot project. Empirical data were collected through three surveys and follow‐up workshops, document studies, and interviews of 12 project participants.

The findings show that many of the lean‐related aspects identified in the literature review were utilized in the pilot project. These aspects have mostly focused on increasing the cooperation among supply chain actors, for which reason the pilot project is very similar to a partnering project. Hence, much work remains in order to obtain full‐fledged lean construction, but the pilot project may serve as a starting point for continuous improvements and development of lean construction in future projects.

The research results are based on one empirical case study for which reasonable generalisations could be made, albeit cautiously.

The frame of reference can serve as an illustration of important aspects and core elements of lean construction and the case study findings show how various lean related aspects can be implemented and how they affect supply chain actors and their performance in a construction project context.

The action research approach based on both qualitative and quantitative data collection in a lean construction pilot project provides a valuable opportunity to study both the process of implementing lean construction and its outcomes.

Investigates managers’ perceptions of service quality in the international market. Eight propositions are developed using the relationship approach in industrial marketing and the internationalization process model. A structural LISREL‐based model is developed on the basis of a sample of 196 firms which supply business services abroad. The results suggest that customer relationships, industry relationships and unique competence strongly influence supplier‐perceived service quality in international markets.

The purpose of this paper is to understand how a continuous improvement (CI) approach like lean production (LP) integration is affected by dynamic conditions and to propose how LP integration can be adaptable to dynamic conditions.

A longitudinal case study has been conducted in which data were collected through participative observations, observations, documents and an in-depth semi-structured interview.

The adaptability is related to the maturity level of the LP integration, where more mature organisations are better equipped to deal with the challenges occurring due to their learning and experimentation capabilities. The main problem is that the LP integration needs to be adapted, like compromising with just-in-time. This creates challenges to more immature organisations; they do not seem to be able to adapt the LP integration since the skills are lacking.

The research limitations are associated with the research design and therefore might limit generalisation of the context studied.

The management needs to stay focused on the LP integration to continue building CI capability. There is a need to adapt the LP concept, which includes assessing how proposed changes and the LP concept interact in order to make them reinforce each other. This involves creating guidelines concerning adaptation and facilitating a transition from mainly single-loop learning to double-loop learning.

This paper contributes by describing challenges that have an impact on LP integration and related organisational adaptability under dynamic conditions.

Mortality statistics are an important source of information concerning variations in time and place, identification of risk factors and the evaluation of treatment programs. In this study, a new death certificate was completed “blind” on the basis of hospital records from the last episode of care, across a random sample of 1,376 cases. The results showed that the overlap between the official register’s underlying cause of death and that of a panel was 72 per cent at the three‐digit level. The official underlying cause of death from cerebrovascular diseases (CVD) was 72 cases in this sample, while 93 were deemed to have CVD by a panel. Additionally, of the 1,233 cases originally reported as non‐CVD, the panel deemed non‐CVD to be the true underlying cause in 1,176 cases. The paper concludes that CVD was most often correctly reported as the underlying cause of death in the investigated ages up to 75 years but plain differences were found between specialities and in different hospital size.

The study draws on the resource-based view and the contingency view of strategy. The purpose of this paper is to contribute to international strategy literature by extending the current understanding of foreign subsidiary’s competitive strategy in terms of cost leadership and product differentiation.

Hypotheses concern associations between corporate support building on product and skills relatedness and subsidiary strategies. Also, it is hypothesized that strategies are due to the type of local competitive intensity. The hypotheses were tested on wholly owned subsidiaries of Swedish industrial firms in Germany, the UK and the USA.

Product and skills relatedness between the subsidiary and the corporate core unit are positively associated with the subsidiary’s emphasis on cost leadership. Also, a positive association was found between skills relatedness and product differentiation, and extensive competitive intensity strengthens the relationship.

The study specifies what business relatedness is needed for a subsidiary’s competitive strategy; skills relatedness is more important than product relatedness; the type of local competitive intensity is important; corporate support and local strategy operate simultaneously.

Management is advised to implement a foreign subsidiary’s competitive strategy by recognizing the mechanisms identified in this study.

In a unique way, the study captures the role of corporate support of a foreign subsidiary’s competitive strategy relying on business relatedness and the importance of aligning the strategy with competitive intensity.

The purpose of this paper is to introduce a special issue about the construction industry and the management of its supply chains. It aims to discuss and point to some differences and possible similarities with traditional manufacturing and its supply chains.

The paper is mostly a literature review and contains official statistics.

The market of the construction company is mostly local and highly volatile. The long durability of the construction “product” contributes to the volatility. The product specification process before the customer order arrives shows different degrees of specifications: engineer to order, modify to order, configure to order, select a variant. (The common make‐to‐stock in traditional manufacturing does not exist.) A construction company only executes a small part of the project by its own personnel and capacity. This is a way of risk spreading and risk mitigation and to compensate for an unstable market. If a construction company wants to establish a new concept, from “engineer to order” to e.g. “configure to order”, it must be engaged earlier in the business process and with other than usual customers, which might complicate the process.

Experiences from Sweden and Swedish developments are the main source of information.

The paper introduces the articles that are a source of scientifically generated knowledge regarding various problems and opportunities associated with supply chain management in the project‐based construction industry.