Search results

The purpose of this paper is to analyse dynamic drape behaviours of 100% wool woven suiting fabrics considering real-time usage.

Dynamic drape coefficients of 100% wool woven fabrics were measured at different rotation speeds (25, 75, 125 and 175 rpm) with a commercially used fabric drape tester which works on image processing principle. Average daily walking speed of male and female volunteers was determined and the closest rotation speed was selected to calculate dynamic drape coefficient at walking (DDCw). Besides, bending rigidity and shear deformation properties, which are known to be related to the static drape behaviours of the fabrics, were also measured and the relationships between these parameters and DDCw were examined.

As a result of the experimental study, it was found that dynamic drape coefficients become greater, which means the fabrics take flatter position, with the increase of the rotation speed. In addition, it was also seen that parameters known to be related to static drape behaviours such as unit weight and bending stiffness have less effect on the dynamic drapes of fabrics. For the estimation of dynamic drape behaviour of fabrics, parameters such as static perimeter, dynamic perimeter, etc. are found more significant.

To date, although studies about dynamic drape behaviours of the fabrics claimed that dynamic drape gives more realistic results for in wearer experience, few of them focused on the rotation speed of dynamic drape tester for real-time usage. As dynamic drape behaviours of fabrics may differ for different rotation speed, determining appropriate speed in accordance with real-time usage gives more realistic results.

The purpose of this paper is to generate a virtual knee angle reference to be followed by a knee prosthesis control, using an adaptive central pattern generator (CPG). Also, to study the feasibility of this approach to implement a continuous control strategy on the prosthesis.

A CPG based on amplitude controlled phase oscillators (ACPOs) to track the current percentage of gait cycle on the prosthesis is proposed. Then, the virtual knee angle reference is generated along gait cycle, by interpolation with the corresponding angle of a sound knee. The structure and coupling of the CPG, as well as the control strategy are presented.

The coupling of the CPG with real gait on the prosthesis was proven, regardless of gait speed. Also, it was found that the maximum knee angle reached during walking is proportional to gait speed. Finally, generation of virtual knee angle reference to be followed by a prosthesis is demonstrated.

As only one event detected along gait cycle was used to update the CPG phase, the response to gait speed changes might be slow. Updating the CPG with more events remains for a future work.

The coupling of the CPG with real gait on the prosthesis results in a continuous gait cycle tracker, useful for any control strategy to be applied.

It is the first time a bio‐inspired concept as CPGs is applied to the prosthetic field. This could mean the beginning of a new era of cybernetic prostheses, which reproduce the lost limb and also the control functions of it.

The purpose of this paper is to introduce a quadruped robot strategy to avoid tipping down because of side impact disturbance and a control algorithm that guarantees the strategy can be controlled stably even in the presence of disturbances or model uncertainties.

A quadruped robot was developed. Trot gait is applied so the quadruped can be modelled as a compass biped model. The algorithm to find a correct stepping position after an impact was developed. A particle swarm optimization-based structure-specified mixed sensitivity (H₂/H_∞) robust is applied to reach the stepping position.

By measuring the angle and speed of the side tipping after an impact disturbance, a point location for the robot to step or the foothold recovery point (FRP) was successfully generated. The proposed particle swarm optimization-based structure-specified mixed sensitivity H₂/H_∞ robust control also successfully brought the legs to the desired point.

A traditional H_∞ controller synthesis usually results in a very high order of controller. This makes implementation on an embedded controller very difficult. The proposed controller is just a second-order controller but it can handle the uncertainties and disturbances that arise and guarantee that FRP can be reached.

The first contribution is the proposed low-order robust H₂/H_∞ controller so it is easy to be programmed on a small embedded system. The second is FRP, a stepping point for a quadruped robot after receiving side impact disturbance so the robot will not fall.

Autonomous mobile manipulation depends on a lot of effort at various levels. In general, the hardware design is as important as algorithm (or software) design. In particular, the absence of certain capabilities of hardware can seriously affect the feasibility and performance of algorithms. The purpose of this paper is to present work on developing hardware capability for mobile manipulation by low‐cost humanoids (LOCH) humanoid robot.

This paper presents research work on developing the hardware support which enables vision‐guided mobile manipulation realized on top of a biped humanoid robot called LOCH. One important goal which guides the development is to achieve the hardware capability with human‐like dexterity, modularity, functionality, and appearance.

This paper discusses the detail of solutions leading to the realization of the intended hardware capability, focusing in particular on the issues related to mechanism, actuation, distributed sensing, and distributed control of humanoid head, humanoid hands and humanoid arms. Finally, the paper shows the result of the actual prototype, which can be controlled by a remote control station through wireless connection.

In designing a machine, it is common to do motor‐sizing and material selection. Since these are standard procedures, these details are omitted because readers with the training in mechanical engineering should be able to work out such details in order to select the appropriate motors and materials. Also, this paper does not delve into the description of the biped system of LOCH humanoid, because such work requires another long paper in order to reveal major details.

This paper presents the major detail of research efforts toward developing hardware capabilities for achieving autonomous mobile manipulation by LOCH humanoid robot, focusing on three important modules, namely: perception head, human‐like hands, and arms. The uniqueness of this work is twofold. First, LOCH humanoid robot's perception head has the most versatile sensing capabilities, which are fully integrated into a compact and human‐like head. Second, each of LOCH humanoid robot's hands has 14 degrees of freedom, which are realized within a mechanism which is of human‐hand size and shape. In addition, the perception head, humanoid hands and humanoid arms are seamlessly integrated together owing to the adoption of a distributed system which supports networked sensing and control through the use of both control area network bus and transmission control protocol/internet protocol internet.

The purpose of this paper is to present the mechanical design and stability analysis of a new stair‐climbing robotic wheelchair.

A prototype stair‐climbing robotic wheelchair is constructed comprising a pair of rotational multi‐limbed structures pivotally mounted on opposite sides of a support base. The short arm, long arm, and triangular support structures within each rotational multi‐limbed structure rotate under the actuating effects of epicyclical gear trains.

The robotic wheelchair ascends and descends stairs in a statically stable manner and has an efficient planar navigation capability.

In its current state of development, the robotic wheelchair is controlled and powered remotely via umbilical cords rather than an onboard processor and power supply.

The robotic wheelchair provides an effective solution for enhancing the mobility of the elderly and disabled.

The rotational multi‐limbed mechanisms are developed to ensure the stability of the sitting base at all stages of the stair navigation maneuver without the need for additional servo‐mechanism. The proposed robotic wheelchair shows the simplification of the associated operation process.

Walking on inclined ground is an important ability for humanoid robots. In general, conventional strategies for walking on slopes lack technical analysis in, first, the waist posture with respect to actual robot and, second, the landing impact, which weakens the walking stability. The purpose of this paper is to propose a generic method for walking pattern generation considering these issues with the aim of enabling humanoid robot to walk dynamically on a slope.

First, a virtual ground method (VGM) is proposed to give a continuous and intuitive zero-moment point (ZMP) on slopes. Then, the dynamic motion equations are derived based on 2D and 3D models, respectively, by using VGM. Furthermore, the waist posture with respect to the actual robot is analyzed. Finally, a reformative linear inverted pendulum (LIP) named the asymmetric linear inverted pendulum (ALIP) is proposed to achieve stable and dynamical walking in any direction on a slope with lower landing impact.

Simulations and experiments are carried out using the DRC-XT humanoid robot platform with the aim of verifying the validity and feasibility of these new methods. ALIP with consideration of waist posture is practical in extending the ability of walking on slopes for humanoid robots.

A generic method called ALIP for humanoid robots walking on slopes is proposed. ALIP is based on LIP and several changes, including model analysis, motion equations and ZMP functions, are discussed.

While awareness of social, health and environmental consequences of our collective action are growing, additional efforts are required to deliver the changes needed to affect the greater good. A review of the literature indicates that research efforts may be misdirected. Drawing from empirical data where a total of 161 caregivers reported changes in their child’s walking behaviour following a month long social marketing program, the purpose of this paper is to illustrate differences between behaviour and behaviour change.

Data analyses involved use of multiple linear regression on static followed by dynamic measures of behaviour and behavioural change and their respective determinants. The static model used variables reported by caregivers after program participation, while the dynamic measures used change scores for all variables reported (T2-T1).

Results from the static model showed that only intentions and barriers explained behaviour at Time point 2. In contrast, findings from the dynamic data analysis indicated that a change in injunctive norms (important others’ approval of the child walking to school) explained a change in walking to and from school behaviour. Taken together, the results of the current paper suggest research attention needs to be directed towards dynamic methodologies to re-centre research attention on behavioural change and not behaviour, which dominates current practice.

This paper offers a foundational step to support the research community to redirect research efforts from understanding behaviour to focussing research design and theoretical development on behavioural change. Theories of behaviour change are needed to affect the greater good.

Planning and control of humanoid biped walking has been an active research topic for many years. But, there is no definite answer to the question of how to practicre‐examinedally achieve speedy and stable walking in real‐time and in a changing environment. The purpose of this paper is to re‐examine the issue of planning and controlling humanoid biped walking, then to propose two new ideas.

The first idea is to treat the supporting foot of a biped to be part of the ground. In this way, there is a foot reaction force acting at a fixed virtual joint, which can be at, or below, the ankle joint. And, a new concept is come our that is named as in‐foot ZMP in contrast to the existing concept of on‐ground ZMP. The unique benefit with this new concept of in‐foot ZMP is that the ZMP control is no longer an issue because the in‐foot ZMP can be controlled so as to to be at a fixed virtual joint during a stable walking. Such a fixed virtual joint can be called a ZMP joint.

The second idea is to focus on hip's trajectory (instead of on‐ground ZMP's trajectory) and to split a hip's dynamic response into two independent parts: one is the steady‐state response contributing to the stability of walking (or standing), and the other is the transient response contributing to the speed of walking. This idea allows us to explicitly postulate the necessary and sufficient condition for achieving leg stability as well as the necessary and sufficient condition for achieving foot stability. The paper shows that the implementation of these two new ideas help realize a unified framework for task‐guided, intention‐guided, and sensor‐guided, planning and control of humanoid biped walking.

This paper first re‐examines the issue of planning and controlling humanoid biped walking, then proposes two new ideas. The first idea is to treat the supporting foot of a biped to be part of the ground. The second idea is to focus on hip's trajectory (instead of on‐ground ZMP's trajectory) and to split a hip's dynamic response into two independent parts: one is the steady‐state response contributing to the stability of walking (or standing), and the other is the transient response contributing to the speed of walking.

This paper aims to present a step-exchange strategy for balance control of a walking biped robot when a lateral impact acts suddenly. A step-out strategy has been recently proposed for balance control when an unknown lateral force acts to a biped robot during walking. This step-out strategy causes a robot to absorb the impact kinetic energy and efficiently maintain balance without falling down. Nevertheless, it was found that the previous strategies have drawbacks that the two foots should always be on the ground (double-support mode) after being balanced and the authors think it is difficult to continue walking after being balanced. Unlike the existing balance strategies, the proposed step-exchange strategy is to not only maintain balance but also to lift one leg in the air (single-support mode) after being balanced so that it is easy for a biped robot to keep walking after being balanced.

In the proposed step-exchange strategy, forward Newton–Euler equation, angular momentum and energy conservation equation were derived. Hill-climbing algorithm is utilized for numerically finding a solution. To verify the proposed strategy, a biped robot by Open Dynamics Engine was stimulated, and experiments with a real biped robot (LRH-1) were also conducted.

The proposed step-exchange strategy enables a walking biped robot under a lateral impact to keep balance and to keep a single-support mode after exchanging a leg. It is helpful for a biped robot to continue walking without any stop. It is found that the proposed step-exchange strategy can be applicable for maintaining balance even if a biped robot is moving. Even though this proposal seems immature yet, it is the first attempt to exchange the supporting foot itself. This strategy is very straightforward and intuitive because humans are also likely to exchange their supporting foot onto the opposite side when an unexpected force is acting.

The proposed step-exchange strategy described in this paper can be applicable in the situation when the external force is applied in the +Y direction, the left leg is the swing leg and the right leg is the stance leg, or it can also be applicable in the situation when the external force is applied in −Y direction, the right leg is the swing leg and the left leg is the stance leg (Figure 2 for ±Y force direction). If an impact force acts to the side of the swing leg, the other step-exchange strategy is needed. The authors are studying this issue as a future work.

The authors have originated the proposed step-exchange strategy for balance control of a walking biped robot under lateral impact. The strategy is genuine and superior in comparison with the state-of-the-art strategy because not only can a biped robot be balanced but it can also easily continue walking by using the step-exchange strategy.

Ongoing research in computational design synthesis of passive dynamic systems aims to automatically generate robotic configurations based on a given task. However, an automated design-to-fabrication process also requires a flexible fabrication method. This paper aims to explore designing and fabricating passive dynamic walking robots and all necessary components using single-material fused deposition modeling (FDM). Being able to fabricate all components of a robot using FDM is a step toward the goal of automated design and fabrication of passive dynamic robots.

Two different configurations of passive dynamic walking robots are re-designed to be fabricated using FDM. Different robotic joint assemblies are designed and tested. To arrive at feasible solutions, a modular design approach is chosen and adjustability of components after printing is integrated in the design.

The suitability of FDM for printing passive dynamic robots is shown to depend heavily on the sensitivity of the configuration. For one robot configuration, all components are printed in one job and only little assembly is needed after printing. For the second robot configuration, which has a more sensitive gait, a metal bearing is found to increase the performance substantially.

Printable, monolithic mechatronic systems require multi-material printing, including electronics. In contrast, passive dynamic systems not only have the potential to save energy and component cost compared to actuated systems but can also be fabricated using single-material FDM as demonstrated in this paper.