Search results

This study proposes targeted modernization of the Department of Defense (DoD's) Joint Forces Ammunition Logistics information system by implementing the optimized innovative information technology open architecture design and integrating Radio Frequency Identification Device data technologies and real-time optimization and control mechanisms as the critical technology components of the solution. The innovative information technology, which pursues the focused logistics, will be deployed in 36 months at the estimated cost of $568 million in constant dollars. We estimate that the Systems, Applications, Products (SAP)-based enterprise integration solution that the Army currently pursues will cost another $1.5 billion through the year 2014; however, it is unlikely to deliver the intended technical capabilities.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.

The purpose of this paper is to extend complex-shaped discrete element method simulations from a few thousand particles to millions of particles by using parallel computing on department of defense (DoD) supercomputers and to study the mechanical response of particle assemblies composed of a large number of particles in engineering practice and laboratory tests.

Parallel algorithm is designed and implemented with advanced features such as link-block, border layer and migration layer, adaptive compute gridding technique and message passing interface (MPI) transmission of C++ objects and pointers, for high performance optimization; performance analyses are conducted across five orders of magnitude of simulation scale on multiple DoD supercomputers; and three full-scale simulations of sand pluviation, constrained collapse and particle shape effect are carried out to study mechanical response of particle assemblies.

The parallel algorithm and implementation exhibit high speedup and excellent scalability, communication time is a decreasing function of the number of compute nodes and optimal computational granularity for each simulation scale is given. Nearly 50 per cent of wall clock time is spent on rebound phenomenon at the top of particle assembly in dynamic simulation of sand gravitational pluviation. Numerous particles are necessary to capture the pattern and shape of particle assembly in collapse tests; preliminary comparison between sphere assembly and ellipsoid assembly indicates a significant influence of particle shape on kinematic, kinetic and static behavior of particle assemblies.

The high-performance parallel code enables the simulation of a wide range of dynamic and static laboratory and field tests in engineering applications that involve a large number of granular and geotechnical material grains, such as sand pluviation process, buried explosion in various soils, earth penetrator interaction with soil, influence of grain size, shape and gradation on packing density and shear strength and mechanical behavior under different gravity environments such as on the Moon and Mars.

The present work aims to investigate the capabilities of accurately predicting the six-degrees-of-freedom (6DoF) trajectory and the flight behavior of a flare-stabilized projectile using computational fluid dynamics (CFD) and rigid body dynamics (RBD) methods.

Two different approaches are compared for calculating the trajectory. First, the complete matrix of static and dynamic aerodynamic coefficients for the projectile is determined using static and dynamic CFD methods. This discrete database and the data extracted from free-flight experiments are used to simulate flight trajectories with an in-house developed 6DoF solver. Second, the trajectories are simulated solving the 6DoF motion equations directly coupled with time resolved CFD methods.

Virtual fly-out simulations using RBD/CFD coupled simulation methods well reproduce the motion behavior shown by the experimental free-flight data. However, using the discrete database of aerodynamic coefficients derived from CFD simulations shows a slightly different flight behavior.

A discrepancy between CFD 6DoF/RBD simulations and results obtained by the MATLAB 6DoF-solver based on discrete CFD data matrices is shown. It is assumed that not all dynamic effects on the aerodynamics of the projectile are captured by the determination of the force and moment coefficients with CFD simulations based on the classical aerodynamic coefficient decomposition.

This paper aims to research the tribological and dynamic characteristics of aeroengine hybrid ceramic bearings through wear experiments and simulation analysis.

First, the authors carried out wear experiments on Si₃N₄–GCr15 and GCr15–GCr15 friction pairs through the ball-disc wear test rig to explore the tribological properties of their materials. Second, using ANSYS/LS-DYNA simulation software, the dynamic simulation analysis of hybrid bearings was carried out under certain working conditions, and the dynamic contact stress of all-steel bearings of the same size was simulated and compared. Finally, the change of the maximum contact stress of the main bearing under the change of load and rotation speed was studied.

The results show that the Si₃N₄–GCr15 pair has better tribological performance. At the same time, under the conditions of high speed and heavy load, the simulation analysis shows that the contact stress between the ceramic ball and the raceway of the ring is smaller than the steel ball. That is, hybrid bearings have better transient mechanical properties than all-steel bearings. With the speed increasing to 12,000 r/min, the maximum stress point will shift in the inner and outer rings.

In this study, the tribological and transient mechanical properties of Si₃N₄ material were comprehensively analyzed through wear experiments and dynamic simulation analysis, which provided a reference for the design of hybrid bearings for next-generation aeroengines.

This paper investigates the potential of dynamic process modelling as an approach for addressing the problem of information systems (ISs) evaluation in the context of organisational change.

A real‐life case study is discussed, showing how dynamic simulation models that incorporate the effects of a proposed IS on existing business processes can help analysts and decision makers arrive at more informed choices for system design and evaluation.

Based on the case findings, we postulate that the design and implementation of organisational systems could be augmented by the development of dynamic process models depicting business operations before and after the introduction of an IS, and the subsequent experimentation with such models to achieve maximum fit between organisational needs and system capabilities.

The study findings imply that dynamic process modelling may be of help in the endeavour of developing ISs that are aligned with the overall business strategy and objectives.

Shows how dynamic simulation models that incorporate the effects of a proposed IS on existing business processes can help analysts and decision makers arrive at more informed choices for system design and evaluation.

Lean implementation is vastly incorporated in core manufacturing processes; however, its applicability in the supply chain and service industry is still in its infancy. To acquire performance excellence and thrive in the global competitive market, many firms are adopting newer methodologies. But, there is a stringent need for production simulation systems to analyze supply chains both inbound and outbound. The era of face validation is slowly disappearing. Lean tools and procedures that provide future state assumptions need advanced tools and techniques to measure, quantify, analyze and validate them. The purpose of this study is to enable dynamic quantification and visualization of the future state of a warehouse supply chain value stream map using discrete event simulation (DES) technique.

This study aimed to apply an integrated approach of the value stream mapping (VSM) and DES in a Malaysian pharmaceutical production warehouse. The main focus is diverted towards reducing the warehouse supply chain lead time by initially constructing a supply chain value stream map (both present state and future state) and integrating its data in a DES modelling and simulation software to dynamically visualize the changes in future state value stream map.

The DES simulation was able to mimic the future state lead time reductions successfully, which assists in better decision-making. Improvements were seen related to total lead time, process time, value and non-value-added percentage. Warehouse performance metrics such as receiving, put away and storage rates were substantially improved along with pallet processing time, worker and forklift throughput usage percentage. Detailed findings are clearly stated at the end of this paper.

This study is limited to the warehouse environment and further additional process models and functional upgrades in the DES software systems are very much needed to directly visualize and quantify all the possible Lean assumptions such as radio frequency image identification/Andon (Jidoka), 5S, Kanban, Just-In-Time and Heijunka. However, DES has a leading edge in extracting dynamic characteristics out of a static VSM timeline and capture details on discrete events precisely by picturizing facility modification and lead time related to it.

This paper includes all the fundamental pharmaceutical warehouse supply chain processes and the simulations of the future state VSM in a real-life context by successfully reducing supply chain lead time and allowing managers in inculcating near-optimal decision-making, controlling and coordinating warehouse supply chain activities as a whole.

This integrated approach of DES and VSM can involve managers and top management to support the adoption of anticipated changes. This study also has the potential to engage practitioners, researchers and decision-makers in the warehouse industry.

This study involves a powerful DES software package that can mimic the real situation as a virtual simulation and all the data and model building are based on a real warehouse scenario in the pharmaceutical industry.

Nowadays, the determination of the acoustic radiation of electric machines is of particular interest, because legal regulations restrict the maximum audible noise radiated by technical devices such as electrical machinery. The purpose of this paper is to analyze the electromagnetic excited structure‐borne sound and air‐borne noise of an AC servo drive.

This paper presents the required steps for the multiphysics acoustic simulation of electrical machines to evaluate its noise behaviour. This numerical approach starts with the electromagnetic force‐wave simulation. The computation by a structure dynamic model determines the deformation of the mechanical structure due to the force‐waves. The final step of the simulation approach consists of the computation of the acoustic radiation.

For the electromagnetic simulation analytical and numerical methods are combined to gain some acceleration of the entire multiphysics simulation approach. This combination offers additionally a detailed understanding of the noise generation mechanism in electrical machines.

Particular attention is paid to the structural‐dynamic model. Modelling of microstructures, such as the laminated iron core or insulated coils, is memory and computational expensive. A systematic material homogenisation technique, based on experimental‐ and numerical modal analyses, yields a higher accuracy at lower computational costs when compared to standard numerical approaches. The presented multiphysics simulation is validated by measurements. The methods are presented by means of a case study.