Search results

1 – 10 of 167
Article
Publication date: 2 February 2024

Dawu Shu, Shaolei Cao, Yan Zhang, Wanxin Li, Bo Han, Fangfang An and Ruining Liu

This paper aims to find a suitable solution to degrade the C.I. Reactive Red 24 (RR24) dyeing wastewater by using sodium persulphate to recycle water and inorganic salts.

Abstract

Purpose

This paper aims to find a suitable solution to degrade the C.I. Reactive Red 24 (RR24) dyeing wastewater by using sodium persulphate to recycle water and inorganic salts.

Design/methodology/approach

The effects of temperature, the concentration of inorganic salts and Na2CO3 and the initial pH value on the degradation of RR24 were studied. Furthermore, the relationship between free radicals and RR24 degradation effect was investigated. Microscopic routes and mechanisms of dye degradation were further confirmed by testing the degradation karyoplasmic ratio of the product. The feasibility of the one-bath cyclic dyeing in the recycled dyeing wastewater was confirmed through the properties of dye utilization and color parameters.

Findings

The appropriate conditions were 0.3 g/L of sodium persulphate and treatment at 95°C for 30 min, which resulted in a decolorization rate of 98.4% for the dyeing wastewater. Acidic conditions are conducive to rapid degradation of dyes, while ·OH or SO4· have a destructive effect on dyes under alkaline conditions. In the early stage of degradation, ·OH played a major role in the degradation of dyes. For sustainable cyclic dyeing of RR24, inorganic salts were reused in this dyeing process and dye uptake increased with the times of cycles. After the fixation, some Na2CO3 may be converted to other salts, thereby increasing the dye uptake in subsequent cyclic staining. However, it has little impact on the dye exhaustion rate and color parameters of dyed fabrics.

Originality/value

The recommended technology not only reduces the quantity of dyeing wastewater but also enables the recycling of inorganic salts and water, which meets the requirements of sustainable development and clean production.

Details

Pigment & Resin Technology, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0369-9420

Keywords

Article
Publication date: 24 October 2023

Raphael Kanyire Seidu, Benjamin Eghan, Emmanuel Abankwah Ofori, George Kwame Fobiri, Alex Osei Afriyie and Richard Acquaye

The purpose of this study is to investigate the physical, ultraviolet (UV), colour appearance and colour fastness properties of selected fabrics dyed with natural dyes from Daboya…

Abstract

Purpose

The purpose of this study is to investigate the physical, ultraviolet (UV), colour appearance and colour fastness properties of selected fabrics dyed with natural dyes from Daboya and Ntonso communities of Ghana. The study further highlights the rich cultural heritage of traditional dyeing from these two communities. Craftsmen in West Africa especially Ghana, have sustained the traditional dyeing methods to produce textile products for consumers.

Design/methodology/approach

In this study, two sample fabrics were purchased from craftsmen at Ntonso and Daboya communities in Ghana. These fabrics were analysed at the laboratory under standard test methods for their physical, UV, colour appearance and colour fastness properties.

Findings

Results showed that all the sample fabrics have good UV shielding performance (ratings above 50+). Daboya sample fabrics (dyed with indigo dyes) produced more colour stains than the sample fabrics from Ntonso (dyed with black “kuntunkuni” dyes). The K/Ssum value or colour yield reduced after washing but that alternatively increased the calculated ultraviolet protection factor.

Practical implications

Findings from this study exposed the unique UV performance of dyed traditional fabrics (using natural dyes) from Ntonso and Daboya communities in Ghana. This inspires and enforces the need for craftsmen to improve their production cycle to produce these fabrics in different sizes which provides the necessary UV shielding abilities for consumers in the wake of climate changes.

Originality/value

This study demonstrated that the natural dyeing process at the two communities produced relatively good UV and colour fastness properties of the sample fabrics. These eco-friendly dyeing practices have survived over time to maintain and promote the concept of sustainability within the textile and fashion industry in Ghana.

Details

Research Journal of Textile and Apparel, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1560-6074

Keywords

Article
Publication date: 20 October 2023

Junling Wu, Longfei Sun and Long Lin

This study aims to dye silk with natural pigments extract of Coreopsis tinctoria, by treating the fabrics with appropriate mordant under suitable dyeing conditions, to achieve…

22

Abstract

Purpose

This study aims to dye silk with natural pigments extract of Coreopsis tinctoria, by treating the fabrics with appropriate mordant under suitable dyeing conditions, to achieve good dyeing depth, fastness and ultraviolet (UV) protection.

Design/methodology/approach

Firstly, single factor experiments were used to determine the basic dyeing conditions of Coreopsis tinctoria. The optimal process conditions for direct dyeing were determined through orthogonal experiments. After that, the dyeing with mordant was used. Based on the previously determined optimal process conditions, silk fabrics were dyed with different mordanting methods, with different mordants and mordant dosages. The dyeing results were compared, in terms of the K/S values of the dyed fabrics, to determine the most appropriate dyeing conditions with mordant.

Findings

The extract of Coreopsis tinctoria can dye silk fabrics satisfactorily. Good dyeing depth and fastness can be obtained by using suitable dyeing methods and dyeing conditions, especially when using the natural mordant pomegranate rind and the rare earth mordant neodymium oxide. The silk fabrics dyed with Coreopsis tinctoria have good UV resistance, which allows a desirable finishing effect to be achieved while dyeing, using a safe and environmentally friendly method.

Research limitations/implications

The composition of Coreopsis tinctoria is complex, and the specific composition of colouring the silk fibre has not been determined. There are many factors that affect the dyeing experiment, which have an impact on the experimental results.

Practical implications

The results of this study may help expand the application of Coreopsis tinctoria beyond medicine.

Originality/value

To the best of the authors’ knowledge, this paper is the first report on dyeing silk with the extract of Coreopsis tinctoria achieving good dyeing results. Its depth of staining and staining fastness were satisfactory. Optimum dyeing method and dyeing conditions have been identified. The fabric dyed with Coreopsis tinctoria has good UV protection effect, which is conducive to improving the application value of the dyeing fabric. The findings help offer a new direction for the application of medicinal plants in the eco-friendly dyeing of silk.

Details

Pigment & Resin Technology, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0369-9420

Keywords

Article
Publication date: 31 March 2022

Xuemei Guan, Wenfeng Li and Jingyi Huang

The purpose of this paper is to improve the dyeing effect of fast-growing fir wood dyed with reactive dyes.

Abstract

Purpose

The purpose of this paper is to improve the dyeing effect of fast-growing fir wood dyed with reactive dyes.

Design/methodology/approach

In this study, five factors including temperature, the dosage of dye accelerator, dyeing time, the dosage of fixing agent and fixing time were investigated. Then, the color difference and light resistance of the wood surface after dyeing were used as the evaluation indicators; the best dyeing process under the two indicators was obtained through the range analysis. Finally, the two indicators were considered comprehensively, and the fuzzy comprehensive evaluation method was used to obtain the best dyeing process under the comprehensive indicators.

Findings

The results show that when the comprehensive index was used as the evaluation index, the optimal dyeing process for reactive red X-3B dyeing fast-growing fir veneer was that the dyeing temperature was 65°C; the amount of dye accelerator was 25 g L−1; the dyeing time was 2 h; the amount of fixing agent was 15 g L−1; and the fixing time was 35 min.

Originality/value

The technique of wood dyeing is an important method to increase the value of wood products. When using different kinds of dyes or dyeing substrates for wood dyeing, the dyeing process is different. This study determined the best process for reactive dye dyeing of fast-growing fir veneer and provided a solution for improving the value of fast-growing fir wood.

Details

Pigment & Resin Technology, vol. 52 no. 5
Type: Research Article
ISSN: 0369-9420

Keywords

Article
Publication date: 10 June 2022

Hooman Imani, Kamaladin Gharanjig and Zahra Ahmadi

The purpose of this study is simultaneous dyeing and mordanting of wool yarns with extracted cochineal dye and aluminum sulfate to the reduction of consuming energy, water and…

Abstract

Purpose

The purpose of this study is simultaneous dyeing and mordanting of wool yarns with extracted cochineal dye and aluminum sulfate to the reduction of consuming energy, water and time.

Design/methodology/approach

The dyeing process was optimized using the response surface methodology (RSM) approach. pH, dyeing duration and the presence of additives were chosen as variables and the color strength of samples as a response. The color characteristics and fastness attributes of samples dyed in the best condition were evaluated and compared to pre-mordant dyeing outcomes on wool yarns.

Findings

The best conditions for deep dyeing wool with cochineal dye were as follows: pH 2.5, time 110 min and the ratio of aluminum: additives 1:0 at 100 °C. Color strength of dyed wool yarns by one-bath and pre-mordant dyeing methods were approximately the same. Wool yarns can dye to the on-bath dyeing method such that the dyed samples have similar color strength and fastness properties to pre-mordant dyeing.

Social implications

Wool dyeing processes that use one-bath dyeing consume less water and produce fewer effluents. As a result, this strategy conserves water and energy for a higher quality of life. The findings of this study, in general, aid environmental protection.

Originality/value

A novel one-bath process for dyeing wool with cochineal dye at heavy depths is introduced. RSM was used to optimize the procedure and determine effective parameters on the color strength of dyed wools. Using extracted cochineal dye and aluminum sulfate in a simultaneous dyeing technique, good color fastness qualities on wool fibers were achieved.

Details

Pigment & Resin Technology, vol. 52 no. 3
Type: Research Article
ISSN: 0369-9420

Keywords

Article
Publication date: 28 March 2024

Mozhgan Hosseinnezhad, Kamaladin Gharanjig, Shahid Adeel and Alireza Mahmoudi Nahavandi

Agricultural waste and food sources are some of the pollutants of the environment. One of these wastes is the peel of fruits that cannot be consumed as food. In this regard…

Abstract

Purpose

Agricultural waste and food sources are some of the pollutants of the environment. One of these wastes is the peel of fruits that cannot be consumed as food. In this regard, walnut husk (WH) and oleaster peel (PO) are known as two important sources of tannin and are bulky wastes. Because of the high percentage of tannin, these materials can be used as a natural source for the preparation of bio-mordant in the dyeing process.

Design/methodology/approach

In this study, Reseda and Madder were used as natural dyes in the presence of a mixture of two bio-mordants. WH and PO were selected as bio-mordant. All natural resources are extracted to obtain the juice. The phenolic percentage of tannin-containing extracts was evaluated and then it was used for wool yarns by premordanting method. The results of evaluating the fastness properties using the ISO method.

Findings

The most important achievement of this research is the use of agricultural waste in the dyeing process to reduce environmental pollution and create added value. All compounds rich in tannin have some phenolic components, therefore the amount of phenolic content of these extracts was evaluated. The effect of mixing the mordant on the color characteristics of the yarns was investigated and the results showed that changing the ratio of the combination of two mordant is effective on the K/S values. The results of evaluating the fastness properties using the ISO method showed that the washing, rubbing and light fastness in the presence of mordant is good, good and moderate, respectively.

Originality/value

In this paper, to the best of the authors’ knowledge, for the first time, the combination of two natural extracts obtained from agricultural waste has been used to create a new bio-mordant on fibers and improve stability.

Details

Research Journal of Textile and Apparel, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1560-6074

Keywords

Article
Publication date: 19 February 2024

Shimaa S.M. Elhadad, Hany Kafafy, Hamada Mashaly and Ahmed Ali El-Sayed

The purpose of this study is to use liposome technology in the treatment of fabrics textiles because of its efficient energy saving, reducing time and temperature.

Abstract

Purpose

The purpose of this study is to use liposome technology in the treatment of fabrics textiles because of its efficient energy saving, reducing time and temperature.

Design/methodology/approach

The newly prepared lecithin liposome was used to encapsulate dyes for the purpose of increasing dyeing affinity. Different ratios of commercially available lecithin liposomes (1%, 3%, 5% and 7%) were used simultaneously in the dyeing of cotton and wool fabrics. The treated fabrics (cotton and wool fabrics) were confirmed using different analytical procedures such as scanning electron microscope (SEM), Fourier-transition infrared spectroscopy, ultraviolet protection factor, colour strength (K|S) measurements and fastness measurements.

Findings

The results show that increasing liposome ratios in dyeing baths leads to increased dyeing affinity for cotton and wool fabrics compared with conventional dyeing without using liposomes. In addition to that, the colour strength values, infrared spectra, SEM and fastness properties of non-liposome-dyed fabrics and liposome-dyed fabrics were investigated.

Originality/value

The research paper provides broad spectrum of green encapsulation fabrics using liposome technology to perform the dye stability, dye strength and fastness.

Details

Pigment & Resin Technology, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0369-9420

Keywords

Abstract

Graphical abstract

Purpose

This study aims to synthesize new disperse dyes based on novel pyrazolyl quinolinone derivatives EQ1 and EQ2 and evaluate their characteristics after dyeing them on a polyester fabric.

Design/methodology/approach

New dispersed dyes based on pyrazolyl quinolinone derivatives were prepared and confirmed by different analyses, such as infrared spectroscopy, elemental microanalysis and nuclear magnetic resonance spectroscopy. They were dyed on a polyester fabric. The characteristics of dyed polyester were determined by color measurements such as a*, b*, L*, C*, E, Ho, R% and color strength. The electronic structures of EQ1 and EQ2 in gaseous state were investigated using density functional theory/B3LYP/6-311++G (d, p) level of theory.

Findings

The suitability of the prepared dyestuffs for dyeing on polyester fabrics has been investigated. The study was concerned with comparing the contrasting depth of shade and levelness. The study was concerned mainly with dye uptake and color measurements at two different temperatures. The results showed that the exhaustion values of dyes inside the polyester at 130°C were higher than those obtained at conventional dyeing temperature (100°C). The exhaustion values of EQ2 were greater than those of EQ1 at 130°C with 2.2%, while the brightness of EQ2 was higher than that of EQ1 at the two investigated temperatures. The results of molecular orbital calculations show that the studied compounds are planar. In addition, the ionization potential of EQ1 was lower than that of EQ2. The results of the theoretical study helped in understanding the dyeing behavior of the investigated azo dyes.

Originality/value

The prepared disperse dyes based on pyrazolyl quinolinone derivatives could be used in textile dyeing of polyester on an industrial scale.

Details

Pigment & Resin Technology, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0369-9420

Keywords

Article
Publication date: 7 September 2023

Padma S. Vankar and Afreen Begum

Replacing conventional mordants by benign mordants, rare earth (RE) salts have been used in the process of natural dyeing with annatto seed extract. The purpose was threefold …

Abstract

Purpose

Replacing conventional mordants by benign mordants, rare earth (RE) salts have been used in the process of natural dyeing with annatto seed extract. The purpose was threefold – first, to increase the dye uptake through these new mordants; second, to have better fastness properties of dyed swatches and third, to have lesser effluent pollution, as the new RE mordants are used in one-tenth quantities only.

Design/methodology/approach

Sustainable natural dyeing was attained by using RE salts as mordant in one-tenth quantity, for natural dyeing, replacing the conventional mordants such as alum and ferrous sulphate. Annatto extract has been used as natural dye.

Findings

Through the study, it was inferred that the natural dyeing using annatto seed extract gives very good colour depth on the dyed swatches and also shows marked improvement in fastness properties.

Research limitations/implications

Research implication is that often it is expected that any new chemical used in the textile processing adds on to the effluent load; however, contrary to that, this study found that the use of RE salt is very beneficial as it is used in smaller quantities, but gives far better dyeing results.

Practical implications

RE salts can be used in natural dyeing without causing any harm to the environment and dyers.

Social implications

Use of RE salts in natural dyeing is a new concept. It is a very safe technology and can be used without causing any harm to the environment and the dyers.

Originality/value

This study is unique as it focuses on the use of RE salts in natural dyeing replacing the conventional mordants, which are used ten times more in quantity.

Details

Pigment & Resin Technology, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0369-9420

Keywords

Article
Publication date: 7 June 2023

Yunus Berkli, Ayşegül Zencirkıran and Fazlıhan Yılmaz

Natural dyeing has existed in human life from past to present. Although it lost its importance after the industrial revolution, it has started to make again a name for itself…

54

Abstract

Purpose

Natural dyeing has existed in human life from past to present. Although it lost its importance after the industrial revolution, it has started to make again a name for itself today with the increase in environmental awareness. The purpose of this study is to investigate whether the Hibiscus sabdariffa L. can be used in the coloring of woolen fabrics and as a natural antibacterial agent for these fabrics.

Design/methodology/approach

Within the scope of the study, it was investigated whether the antibacterial activity of the Hibiscus sabdariffa L. can be transferred to woolen fabrics. In the study, woolen fabric samples were dyed with and without mordant with the help of Hibiscus sabdariffa L. extract. After the dyed fabric samples were washed and dried, their color values were measured, and antibacterial effect tests (against Staphylococcus aureusEscherichia coli), washing and rubbing fastness tests were carried out. In addition to these, scanning electron microscopy images of dyed fabric samples were taken and Fourier transform infrared microspectroscopy analyzes were also performed.

Findings

As a result of the study, it has been determined that the antibacterial activity of the Hibiscus sabdariffa L. can be transferred to woolen fabrics without the use of any chemicals.

Originality/value

Natural antibacterial agent for woolen fabrics was obtained within the scope of the study without the use of chemicals.

Details

Pigment & Resin Technology, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0369-9420

Keywords

1 – 10 of 167