Search results

Tie‐dye/batik produced in Abeokuta has contributed significantly to the Nigerian economy. Unfortunately, the influx of second‐hand clothing and cheap new fabrics from Europe and Asia has had a great negative effect on the industry. Consumers no longer patronize locally produced fabrics. They prefer cheap imported fabrics, either new or second‐hand. However, this paper aims to focus on innovation (“EVIPI” – an acronym for “examine, vision, ideas, prioritize, implementation”) in niche marketing as a strategy for the renaissance of resist dyeing industries (tie‐dye/batik) in Abeokuta to compete favorably in the local market.

The study combined qualitative interviews with tie‐dye/batik practitioners, observation data and literature from secondary sources.

The findings reveal that practitioners lack innovative ideas that can help them in the sustainable growth of their businesses.

The study reveals innovation in niche marketing as the strategy required for the renaissance of tie‐dye and batik in Abeokuta, Nigeria.

The study is the first to look into the renaissance of the resist dyeing industry in Abeokuta through “EVIPI”, an innovation‐motivating acronym in niche marketing.

In this series of articles on printed circuit troubleshooting, the author in this issue of the journal focuses his attention on photoresists. The problems that most commonly occur during lamination, film development, subsequent plating processes, coating consistency, resist exposure and development are detailed.

Eight reactive auxiliaries that act as dye resist agents and differ in number of ionic charges and molecular weights are synthesized and their dye resist effect on wool is evaluated. The results obtained indicate that reactive auxiliary A8 exhibits the highest dye resist effect which means that an increase in the number of ionic groups and molecular weight of an auxiliary leads to better electrostatic repulsion of the dye and thus improves the resist effectiveness. The effect of the dye bath pH, salt concentration, dyeing temperature, dyeing time, and concentration of dye and auxiliaries, are also studied. The fastness properties of the dyed fabric are evaluated. The resist effect achieved with the differential dyeing technique is consistently better than that with dye resist treatments for the eight auxiliaries. When treated wool is dyed in competition with untreated wool, the latter tends to take up the greater part of the dye in the dye bath.

In recent times, wool- and silk-blended fabrics are popular for creating glamourous products. Silk is blended to wool for creating more lustrous effect and to impart strength; on the other hand, wool is responsible for resilience, softness and warmth properties. Chemically both the fibres are protein-based, but the amount of amino acids is different. Due to this, the dye absorption behaviours of the two fibres from the same dye-bath are different. Wool is become darker than the silk fibre, if both the fibres are dyed together in a single bath dyeing process.

Here the wool fibres are first pre-treated with a commercial synthetic tanning agent (syntan) Mesitol HWS at three different pH values of 2.2, 3.2 and 4.2 and at three different concentrations: 5, 10 and 15 per cent. Then the syntan pre-treated wool fibres are dyed together with silk fibres maintaining the blend ratio as 80:20 by Telon Red MR, Telon Yellow M4GL and Telon Blue MRLW with sodium sulphate at three different concentrations of 10, 20 and 30 per cent.

The dye absorbency of the syntan-treated wool fibres decreased with increase in syntan concentration, whereas the colour strength of silk fibres increased. The resist effectiveness of wool fibres is increased from 6 to 59 per cent with increase of syntan concentration. So after the dyeing process, the colour strength of syntan-treated wool fibres are almost same with the colour strength of silk fibres. The washing fastness of the samples is improved, and wash fastness behaviour of both wool and silk fibres is almost same.

This paper gives an idea about the one bath dyeing process of wool- and silk-blended fabrics to achieve solid dyeing effect.

Paper aims to preparation of new acid disperse dyes based on thiadiazol derivatives and evaluation of their use as antimicrobial colorants in digital transfer-printing ink formulations for printing onto polyester fabric substrates.

New disperse dyes based on 1,3,4 - thiadiazol derivative (dyes 1–3) were prepared and evaluated by different analysis then formulated as colored materials in the ink formulations. The viscosity, dynamic surface tension and particle size distribution of the prepared inks were measured. The printed polyester fabric substrates were tested using a variety of tests, including light fastness, washing, alkali perspiration and Crock fastness, as well as depth of penetration. Density-functional theory (DFT) calculations were carried out at the Becke3-Lee-Yang-parr (B3LYP) level using the 6–311** basis set, and the biological activity of the prepared disperse dyes was investigated.

The obtained results of the physical of the prepared ink revealed that thiadiazol disperse ink is a promising ink formulation for polyester printing and agrees with the quality of the printed polyester fabric. The optimization geometry for molecular structures agreed with the analysis of these compounds. The HOMO/LUMO and energy gap of the studied system were discussed. The molecular docking analysis showed strong interaction with DNA Gyrase and demonstrated to us the high ability of these inks to act as antimicrobial agents.

The prepared inks containing the prepared thiadiazol disperse dye were high-performance and suitable for this type of printing technique, according to the results. The prepared inks resist the growth of microorganisms and thus increase the ink's storage stability.

The prepared disperse dyes based on 1,3,4 - thiadiazol derivative (dyes 1–3) can be a promising colorant in different applications, like some types of paint formulations and as a colorant in printing of different fabric substrates.

The purpose of this study is to optimize single-bath dyeing process of wool and silk blend, to achieve uniform colour strength for both the fibre after the dyeing process. Due to different absorption characteristics of wool and silk, two-stage dyeing is preferred in the industry. If the fibres are dyed together, the wool fibre becomes darker and the silk fibre becomes lighter after the dyeing process. Solid dyeing effect can be achieved using a single-bath dyeing process.

The dye-acceptor sites in the wool fibre are first blocked using one commercial syntan Mesitol HWS. Then, the syntan-treated wool and silk fibres (80:20 blend ratios) are dyed with Telon Navy AMF dyes in the presence of sodium sulphate. To explore the influence of Syntan, sodium sulphate and the experimental conditions on the dyeing process and to optimize the process, central composite design (CCD) of four factors and three levels was tested.

The design process is optimized using four independent variables: Mesitol HWS concentration, sodium sulphate concentration, pH of dyebath and temperature of dyeing. Three levels of Mesitol HWS concentration (5, 10 and 15 per cent), sodium sulphate concentration (10, 20 and 30 per cent), pH (2.5, 4 and 5.5) and temperature of dyeing (70, 80 and 900°C) were selected for this study. These variables are optimized using response surface regression equation of the ratio of K/S wool and K/S silk. The predicted equation matched well with the experimental data.

This paper proposes the use of one-bath dyeing process of wool and silk blend fabric to reduce the dyeing time, process step and to save water.

This study aims to deal with the dyeing of nylon-/cotton-blended fabric in one bath using direct and acid dyes.

The cellulose in cotton/nylon-blended fabric was chemically modified using 3-chloro-2-hydroxypropyl tri-methyl ammonium chloride (CHPTAC) as cationizing agent to impart positive charge on the cellulose. The modified and unmodified blended fabrics were dyed in a single bath with direct and acid dyes under various concentrations of 0.5, 1, 2, 4 and 6 per cent on the weight of fabric by exhaust method. The dyeing of modified and unmodified fabrics was characterized through the properties such as K/S and colorfastness to washing, rubbing and light.

The modified fabric exhibited higher color yield, comparable rubbing fastness and good washing fastness.

The dye uptake was maximum in a single-bath dyeing process of nylon-/cotton-blended fabrics without electrolyte addition, which minimizes the impact of dyes on environment.

The purpose of this study was to optimise the dyeing conditions to achieve right-first-time dyeing in hard water. Owing to the persistent water scarcity for more than two decades now, the textile industry in Pakistan is forced to rely on high-mineral-content ground water for use in textile wet processing. Furthermore, the limited amount of municipal water that is at the disposal of the textile industry is also high in mineral content. Thus, on the large scale, water hardness has become an acute problem for the textile processor. In particular, in the dyeing process, water hardness is known to have crucial effects. However, to-date, no systematic study has been conducted on this aspect of textile dyeing.

In this study, 3² full factorial design was used to optimise the dyeing conditions to achieve right-first-time dyeing in hard water. Thus, cotton fabric was dyed with Red Reactive dye (of dyebath concentration at 5, 10 and 15 g/L) in prepared hard water (of hardness at 10, 40 and 70°dH), respectively. Analysis of variance, coefficient of determination (R²) and p-values for the models were used to evaluate the adequacy of the predictive models. The surface plots of the effects were studied to further examine the interactions of two independent variables. Derringer’s desirability function was used to determine the optimum levels of each variable.

Three levels for both independent variables generate second-order polynomial models to predict the colour strength, lightness, red/green, yellow/blue and total colour difference values of dyed cotton. The obtained predictive models point out the considerable influence of both water hardness and dye concentration on right-first-time dyeing.

Such a finding enabled the dye-mill to produce the correct shade at water hardness of 10°dH and 15 g/L dye concentration, without the need for corrective reprocessing.

The purpose of this study is to investigate the physical, ultraviolet (UV), colour appearance and colour fastness properties of selected fabrics dyed with natural dyes from Daboya and Ntonso communities of Ghana. The study further highlights the rich cultural heritage of traditional dyeing from these two communities. Craftsmen in West Africa especially Ghana, have sustained the traditional dyeing methods to produce textile products for consumers.

In this study, two sample fabrics were purchased from craftsmen at Ntonso and Daboya communities in Ghana. These fabrics were analysed at the laboratory under standard test methods for their physical, UV, colour appearance and colour fastness properties.

Results showed that all the sample fabrics have good UV shielding performance (ratings above 50+). Daboya sample fabrics (dyed with indigo dyes) produced more colour stains than the sample fabrics from Ntonso (dyed with black “kuntunkuni” dyes). The K/S_sum value or colour yield reduced after washing but that alternatively increased the calculated ultraviolet protection factor.

Findings from this study exposed the unique UV performance of dyed traditional fabrics (using natural dyes) from Ntonso and Daboya communities in Ghana. This inspires and enforces the need for craftsmen to improve their production cycle to produce these fabrics in different sizes which provides the necessary UV shielding abilities for consumers in the wake of climate changes.

This study demonstrated that the natural dyeing process at the two communities produced relatively good UV and colour fastness properties of the sample fabrics. These eco-friendly dyeing practices have survived over time to maintain and promote the concept of sustainability within the textile and fashion industry in Ghana.

The ever‐increasing miniaturization and integration of additional functions in the electronics industry – in particular in the next generation telecomm technologies – needs a paradigm shift in manufacturing technologies in order to achieve the results along the roadmaps of the industry. Handling of thin substrates, doing finest line circuitry, working on non‐flat surfaces and having to protect metallized holes during etching processes, are asking for conformal resist coatings. Electrophoretically deposited positive working photo resists encompass these requirements. The principles of electrophoretic photo resists, the necessary equipment, the cooperation between customer, the supplier of process chemistry and the supplier of the equipment to start such a complex project, and start‐up results of the new major production line for ED‐resist in Europe are discussed.