Search results

The research focused on analysing a unique type of heat exchanger that uses swirling air flow over heated tubes. This heat exchanger includes a round baffle plate with holes and opposite-oriented trapezoidal air deflectors attached at different angles. The deflectors are spaced at various distances, and the tubes are arranged in a circular pattern while maintaining a constant heat flux.

This setup is housed inside a circular duct with airflow in the longitudinal direction. The study examined the impact of different inclination angles and pitch ratios on the performance of the heat exchanger within a specific range of Reynolds numbers.

The findings revealed that the angle of inclination significantly affected the flow velocity, with higher angles resulting in increased velocity. The heat transfer performance was best at lower inclination angles and pitch ratios. Flow resistance decreased with increasing angle of inclination and pitch ratio.

The average thermal enhancement factor decreased with higher inclination angles, with the maximum value observed as 0.94 at a pitch ratio of 1 at an angle of 30°.

The purpose of this experimental research was to examine a novel axial heat exchanger featuring swirling air movement over heated tubes. This apparatus is designed with perforated circular baffle plates complemented by rectangular air deflectors operating at different inclination angles. The tubes were arranged in a consistent layout parallel to the longitudinal airflow. The deflector’s heightened air-side turbulence initiates the frenzied motion, escalating the surface heat transfer rate.

The tubes maintained a constant heat flux condition over the surface. In each baffle plate, eight deflectors with identical inclination angles were devised in a reverse position, forming a rotation of air inside a circular duct that held tubes (carrying hot water) which elevated air-side turbulence, thereby enhancing the rate of heat transference on the surface. The baffle plates were equally situated from each other at changing pitch ratios. The Reynolds quantity was preserved in the scope of 16,000–30,000. The performance of the heat exchanger considering pitch ratios and inclination angles was examined.

The research indicates that when examined under similar conditions, an exchanger with a deflector baffle plate shows a strong dependence on the pitch ratio and inclination angle with a mean rise of 0.19 times in thermal enhancement factor at an inclination angle of 30° and a pitch ratio of 1.2 contrasted with an exchanger with segmental baffle plates.

The result shows the dependence of pitch ratio, Reynolds number and inclination on the heat transfer and friction factor rate.

The purpose of this study is to advance turbulent thermal convection inside the constant heat-flux round tube inserted by multiple perforated twisted tapes.

The novel design of this study is accomplished by inserting several twisted tapes and drilling some circular perforations near the tape edge (C1, C3, C5: solid tapes; C2, C4, C6: perforated tapes). The turbulence flow appearances and thermal convective features are examined for various Reynolds numbers (8,000–14,000) using the renormalization group (RNG) κ−ε turbulent model and Semi-Implicit Method for Pressure-Linked Equations (SIMPLE) algorithm.

The simulated outcomes reveal that inserting more perforated-twisted tapes into the heated round tube promotes turbulent thermal convection effectively. A swirling flow caused by the twisted tapes to produce the secondary flow jets between two reverse-spin tapes can combine with the main flow passing through the perforations at the outer edge to enhance the vortex flow. The primary factors are the quantity of twisted tapes and with/without perforations, as the perforation ratio remains at 2.5 in this numerical work. Weighing friction along the tube, C6 (four reverse-spin perforated-twisted tapes) brings the uppermost thermal-hydraulic performance of 1.23 under Re = 8,000.

The constant thermo-hydraulic attributes of liquid water and the steady Newtonian fluid are research limitations for this simulated work.

The simulated outcomes will avail the inner-pipe design of a heat exchanger inserted by multiple perforated twisted tapes to enhance superior heat transfer.

These twisted tapes form tiny circular perforations along the tape edge to introduce the fluid flow through these bores and combine with the secondary flow induced between two reverse-spin tapes. This scheme enhances the swirling flow, turbulence intensity and fluid mixing to advance thermal convection since larger perforations cannot produce large jet velocity or the position of perforations is too far from the tape edge to generate a separated flow. Consequently, this work contributes a valuable cooling mechanism toward thermal engineering.

This study describes a series of experiments investigating the upper hot layer temperature profile in a confined space under different ventilation conditions for porosity-controlled wood crib fires for pre-flashover conditions.

Full-scale compartment (4 m × 4 m × 4 m) experiments were carried out for four-door openings, i.e. 100%, 75%, 50% and 25% of the total vent area (2 m × 1 m) with the wood crib as a fuel load. The temperature of the upper hot smoke layers of the compartment was recorded with the help of four layers of thermocouples for varying vent areas.

The effect of ventilation on the properties, i.e. mass loss rate, enclosure temperature, heat release rate and carbon monoxide (CO) gas concentration, has been measured and analyzed. The effect of ventilation on heat flux and flame temperature has also been studied. Compartment gas temperature has been examined by five wood crib burning stages: Ignition, growth, steady burning, recess and collapse.

Findings demonstrate that the influence of vent openings varies for the burning parameters and upper layer temperature of the compartment. The current results are beneficial in analyzing thermal risks concerning compartment fire and fire safety engineering projects.

This paper aims to examine how the interrelation between architecture and the physical environment came to prominence and influenced the pioneering modernist architects to acquire the features of modern architecture that the British modernists later adopted. How the post-war urban poor of Britain, suffering from ill-health and dire need of sun, air and a good environment, played an essential role in alleviating the environmental concerns of the modern movement architects.

The methodology of this research involves a comprehensive architectural analysis of the Finsbury Health Centre alongside an in-depth historical investigation of modernist design principles. This review article examines books, articles and some archival materials, such as recordings, pictures, etc. on the early phase of British modernism and its environmental dimension by looking at the works of historians, architects and critics.

Design based on modernist principles. While it can be seen as the political agenda of the Labor Party, this building was not only functionally efficient but also represented the biometric concerns of modern architecture with the most natural means.

While this study provides valuable insights, it may be limited by historical documents and data availability.

The originality and value of this paper lie in its examination of the Finsbury Health Centre as a case study, shedding light on the environmental rhetoric of modernism in historic architecture. By providing a holistic assessment of the building’s environmental aspects, this research contributes to both architectural history and contemporary sustainable design practices.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

The Heating, Ventilation and Air Conditioning (HVAC) system is a significant energy consumer in built environments, and the building energy consumption could be minimised by optimising HVAC controls. Hence, this paper aims to investigate the applicability of Variable Refrigerant Flow (VRF) air conditioning systems for optimising the indoor comfort of buildings in Sri Lanka.

To address the research aim, the quantitative approach following the survey research strategy was deployed. Data collected through questionnaires were analysed using descriptive statistical tools, including Mean Rating (MR), Relative Important Index (RII) and Standard Deviation (SD).

The findings revealed that VRF systems are popularly used in Sri Lankan apartment buildings. Furthermore, energy efficiency and comfort were recognised as the most significant top-ranked benefits, while ventilation issues and initial cost were recognised as significant challenges. Moreover, the allocation of trained technicians and provision of proper ventilation through a Dedicated Outdoor Air System (DOAS) were highlighted as applicable mitigation strategies for the identified challenges in VRFs.

The study recommends VRF systems as a suitable technology to ensure energy efficiency, reduce GHG emissions and achieve climate performance within the built environment. The opportunities for adopting VRF systems for developing countries could be explored based on the research findings. The identified challenges would assist the design engineers and facilities professionals to devise suitable strategies to mitigate issues of VRF systems in developing countries.

This research provides empirical proof of the energy efficiency and comfort aspects of VRFs. The study has explored and recommended VRF technology as a beneficial application to overcome the persistent energy crisis in developing countries.

This article sets out to show how principles and questions about method that underlie a way of interpreting the discipline of conservation and restoration can find results in research and studies, aiming at achieving even conscious reuse process. The occasion is the very recent research performed on the former Church of Saints Gerolamo and Francesco Saverio in Genoa, Italy, the Jesuit church annexed to the 17th-century College of the order. It is a small Baroque jewel in the heart of the ancient city, former University Library and actually abandoned, forgotten for years, inaccessible and awaiting a new use.

The two-year work carried out on the monumental building was conducted according to a study and research methodology developed and refined over the years within the activities of the School of Specialisation in Architectural Heritage and Landscape of the University of Genoa. It is a multidisciplinary and rigorous approach, which aims to train high-level professionals, up-to-date and aware of the multiple problems that interventions on existing buildings, especially of a monumental nature, involve.

The biennal study has been carried out within the activities of the Post-Graduate Programme in Architectural Heritage and Landscape of the University of Genoa. The work methodology faces the challenges of the contemporary complexity, raised by the progressive broadening of the concept of cultural “heritage” and by the problems of its conservation, its active safeguard and its reuse: safety in respect of seismic risk, fire and hydro geological instability, universal accessibility – cognitive, physical and alternative – resource efficiency, comfort and savings in energy consumption, sustainability, communication and involvement of local communities and stakeholders.

The goals of the work were the following: understanding of the architectural heritage, through the correlated study of its geometries, elements and construction materials, surfaces, structures, spaces and functions; understanding of the transformations that the building has undergone over time, relating the results of historical reconstructions from indirect sources and those of direct archaeological analysis; assessment of the state of conservation of the building recognising phenomena of deterioration, damage, faults and deficits that affect materials, construction elements, systems and structures; identification of the causes and extent of damage, faults and deficits, assessing the vulnerability and level of exposure of the asset to the aggression of environmental factors and related risks; evaluation of the compatibility between the characteristics of the available spaces, the primary needs of conservation, the instance of regeneration and possible new uses; the definition of criteria and guidelines for establishing the planning of conservation, restoration and redevelopment interventions.

Ohmic heating generates temperature with the help of electrical current and resists the flow of electricity. Also, it generates heat rapidly and uniformly in the liquid matrix. Electrically conducting biofluid flows with Ohmic heating have many biomedical and industrial applications. The purpose of this study is to provide the significance of the effects of Ohmic heating and viscous dissipation on electrically conducting Casson nanofluid flow driven by peristaltic pumping through a vertical porous channel.

In this analysis, the non-Newtonian properties of fluid will be characterized by the Casson fluid model. The long wavelength approach reduces the complexity of the governing system of coupled partial differential equations with non-linear components. Using a regular perturbation approach, the solutions for the flow quantities are established. The fascinating and essential characteristics of flow parameters such as the thermal Grashof number, nanoparticle Grashof number, magnetic parameter, Brinkmann number, permeability parameter, Reynolds number, Casson fluid parameter, thermophoresis parameter and Brownian movement parameter on the convective peristaltic pumping are presented and thoroughly addressed. Furthermore, the phenomenon of trapping is illustrated visually.

The findings indicate that intensifying the permeability and Casson fluid parameters boosts the temperature distribution. It is observed that the velocity profile is elevated by enhancing the thermal Grashof number and perturbation parameter, whereas it reduces as a function of the magnetic parameter and Reynolds number. Moreover, trapped bolus size upsurges for greater values of nanoparticle Grashof number and magnetic parameter.

There are some interesting studies in the literature to explain the nature of the peristaltic flow of non-Newtonian nanofluids under various assumptions. It is observed that there is no study in the literature as investigated in this paper.

The purpose of this study is to describe in detail a recent eBay fraud and to provide a related framework of teaching tools for courses in business law and ethics. The case describes an eBay transaction involving return fraud. This study highlights the problem of fraudulent purchase tactics by an eBay buyer who exploited the eBay feedback mechanism and administrative procedures in attempt to obtain a price reduction or to receive the item for free as a concession.

The work is a case study providing the details and background information on an original eBay return fraud. The case itself provides the source documentation and some background on the eBay platform and its rules. The Appendix provides a set of teaching instructions and discussion questions with model answers related to the specifics of the case.

The eBay resolution of the matter is provided in the Epilogue section of the Appendix. All negative feedback by the buyer against the seller in an attempt to get the item for free was removed by eBay, and the buyer further relinquished all selling privileges on eBay.

This study is unique because it provides the original eBay listing and screenshots of eBay correspondence and the eBay resolution of the matter. The specific type of return fraud is also unusual, as it was directed by the eBay buyer against the seller which appears to be an evolving problem for online retail.