Search results

This paper aims to discuss the use of polyvinyl alcohol (PVA) as a water-soluble support material in desktop three-dimensional (3D) printing. Using a water-soluble material as one of the printing filaments in a dual-extrusion 3D printer provides the flexibility of printing support structures and rafts in complex components and prototypes. This paper focuses on the challenges of acrylonitrile butadiene styrene (ABS)–PVA dual-extrusion printing, and optimal settings and techniques for such hybrid printing.

Several hybrid ABS–PVA parts were printed using a commercial desktop 3D printer. An experimental study was designed to examine the solubility of the PVA support in water by varying four different parameters: length of time in water, water temperature, stirring rate and PVA surface area. The rate of PVA solubility in water was then used to examine its relationship with each parameter.

Numerous problems were encountered while printing ABS–PVA printing parts, including storing the spool of PVA in a dry environment, determining optimal extrusion and build plate temperatures and ABS–PVA adherence during dual extrusion printing. There is no strong literature to address these challenges. Hence, optimal settings and techniques for effective hybrid ABS–PVA were determined. Print yields were also recorded to examine the reliability of ABS–PVA printing.

The tendency of PVA to absorb moisture resulted in a number of build fails and prevented build times longer than 40 minutes. Future work can explore how to print PVA directly from a dry environment.

The optimal settings and techniques for dual-extrusion ABS–PVA printing that are presented in this paper can effectively be used to explore prototyping of geometrically complex parts with PVA as support material.

In addition to the practical implications, the results from this work are a valuable addition to the literature related to printing using water-soluble polymers such as PVA. The experimental methods and techniques of this paper can be used to assess the reliability of similar 3D printing technologies.

Focusses on preliminary studies on developing thermoplastic composite materials suitable for use in fused deposition modeling (FDM). Looks at thermotropic liquid crystalline polymers (TLCPs). Specifically aims to determine the feasibility of post‐processing TLCP composite strands generated by means of the dual extrusion process using FDM to enhance the tensile properties and functionality of prototypes. Describes the experiments and gives in‐depth results which include the finding that final mechanical properties of a composite prototype can be tailored to a specific application by adjusting the laydown pattern to increase the functionality of the prototype, and that these properties can be predicted by composite theory.

Currently on additive manufacturing, extensive research is directed toward mitigating the main challenges associated with multi-material in fused filament fabrication which has a weak bonding strength between dissimilar materials. Low interfacial bonding strength leads to defects, anisotropy and temperature gradient in materials which negatively impact the mechanical performance of the multi-material prints. The purpose of this study was to assess the performance of different interface geometry designs in terms of the mechanical properties of the specimens.

Tensile test specimens were printed using: mono-material without a boundary interface, mono-material with the interface geometries (Face-to-face; U-shape; T-shape; Dovetail; Encapsulation; Mechanical interlocking; and Overlap) and multi-material with the interface geometries. The materials chosen with high and low compatibility were Tough polylactic acid (PLA) and TPU.

The main results of this study indicate that the interface geometries with the mechanical constriction between materials provide better structural integrity to the specimens. Moreover, in the case of the mono-material parts, the most effective interface design was the mechanical interlocking for both Tough PLA and TPU. On the other hand, in the case of multi-material specimens, the encapsulation showed the highest ultimate tensile strength, whereas the overlap and T-shape presented more robust bonding.

This study examines the mechanical performance, particularly tensile strength, strain at break, Young’s modulus and yield strength of different interface designs which were not studied in the previous studies.

The fiber reinforced polymer composites are becoming more critical because of their exceptional mechanical properties and lightweight structures. Fused filament fabrication (FFF) is a three-dimensional (3D) printing technique that can manufacture composite structures. However, the effect of impact performance on the structural integrity of FFF made composites compared to the pre-preg composites is a primary concern for the practical usage of 3D printed parts. Therefore, this paper aims to investigate the effect of different processing parameters on the impact performance of 3D printed composites.

This paper investigates the impact of build orientation, fiber stacking sequence and fiber angle on the impact properties. Two build orientations, three fiber stacking sequences and two different fiber angles have been selected for this study. Charpy impact testing is carried out to investigate the impact energy absorption of the parts. Onyx as a matrix material and two different types of fibers, that is, fiberglass and high strength high temperature (HSHT) fiberglass as reinforcements, are used for the fabrication.

Results indicate that build orientation and fiber angle largely affect the impact performance of composite parts. The composite part built with XYZ orientation, 0º/90º fiber angle and B type fiber stacking sequence resulted into maximum impact energy. However, comparing both types of fiber reinforcement, HSHT fiberglass resulted in higher impact energy than regular fiberglass.

This study evaluates the damage modes during the impact testing of the 3D printed composite parts. The impact energy absorbed by the composite samples during the impact testing is measured to compare the effect of different processing conditions. The investigation of different types of fiberglass reinforced with Onyx material is very limited for the FFF-based process. The results also provide a database to select the different parameters to obtain the required impact properties.

The purpose of the experimental investigation was to optimize the process parameters of the fused deposition modeling (FDM) technique. The optimization of the process was performed to identify the relationship between the chosen factors and the tensile strength of acrylonitrile butadiene styrene (ABS) and carbon fiber polylactic acid (PLA) thermoplastic material, FDM printed specimens. The relationship was demonstrated by using the linear experimental model analysis, and a prediction expression was established. The developed prediction expression can be used for the prediction of tensile strength of selected thermoplastic materials at a 95% confidence level.

The Taguchi L9 experimental methodology was used to plan the total number of experiments to be performed. The process parameters were chosen as three at three working levels. The working range of chosen factors was the printing speed (60, 80 and 100mm/min), 40%, 60% and 80% as the infill density and 0.1mm, 0.2mm and 0.3mm as the layer thickness. The fused deposition modeling process parameters were optimized to get the maximum tensile strength in FDM printed ABS and carbon fiber PLA thermoplastic material specimens.

The optimum condition was achieved by the process optimization, and the desired results were obtained. The maximum desirability was achieved as 0.98 (98%) for the factors, printing speed 100mm/min, infill density 60mm and layer thickness 0.3mm. The strength of the ABS specimen was predicted to be 23.83MPa. The observed strength value was 23.66MPa. The maximum desirability was obtained as 1 (100%) for the factors, printing speed 100mm/min, infill density 60mm and layer thickness 0.2mm. The strength of the carbon fiber PLA specimen was predicted to be 26.23MPa, and the obtained value was 26.49MPa.

The research shows the useful process parameters and their suitable working conditions to print the tensile specimens of the ABS and carbon fiber PLA thermoplastics by using the fused deposition modeling technique. The process was optimized to identify the most influential factor, and the desired optimum condition was achieved at which the maximum tensile strength was reported. The produced prediction expression can be used to predict the tensile strength of ABS and carbon fiber PLA filaments.

The results obtained from the experimental investigation are useful to get an insight into the FDM process and working limits to print the parts by using the ABS and carbon fiber PLA material for various industrial and structural applications.

The results will be useful in choosing the suitable thermoplastic filament for the various prototyping and structural applications. The products that require freedom in design and are difficult to produce by most of the conventional techniques can be produced at low cost and in less time by the fused deposition modeling technique.

The process optimization shows the practical exposures to state an optimum working condition to print the ABS and carbon fiber PLA tensile specimens by using the FDM technique. The carbon fiber PLA shows better strength than ABS thermoplastic material.

This study provides an up-to-date review of additive manufacturing (AM) technologies and guidance for selecting the most appropriate ones for specific applications, taking into account the main features, strengths, and limitations of the existing options.

A literature review on AM technologies was conducted to assess the current state-of-the-art. This was followed by a closer examination of different AM machines to gain a deeper insight into their main features and operational characteristics. The conclusions and data gathered were used to formulate a classification and decision-support framework.

The findings indicate the building blocks of the selection process for AM technologies. Furthermore, this work shows the suitability of the existing AM technologies for specific cases and points to opportunities for technological and decision-support improvements. Lastly, more standardization in AM would be beneficial for future research.

The proposed framework offers valuable support for decision-makers to select the most suitable AM technologies, as demonstrated through practical examples of its utilization. In addition, it can help researchers identify the limitations of AM by pinpointing applications where existing technologies fail to meet the requirements.

The study offers a novel classification and decision-support framework for selecting AM technologies, incorporating machine characteristics, process features, physical properties of printed parts, and costs as key features to evaluate the potential of AM. Additionally, it provides a deeper understanding of these features as well as the potential opportunities for AM and its impact on various industries.

Timing constraints affect the manufacturing of traditional large-scale components through the material extrusion technique. Thus, researchers are exploring using many independent and collaborative heads that may work on the same part simultaneously while still producing an appealing final product. The purpose of this paper is to propose a simple and repeatable approach for toolpath planning for gantry-based n independent extrusion heads with effective collision avoidance management.

This research presents an original toolpath planner based on existing slicing software and the traditional structure of G-code files. While the computationally demanding component subdivision task is assigned to computer-aided design and slicing software to build a standard G-code, the proposed algorithm scans the conventional toolpath data file, quickly isolates the instructions of a single extruder and inserts brief pauses between the instructions if the non-priority extruder conflicts with the priority one.

The methodology is validated on two real-life industrial large-scale components using architectures with two and four extruders. The case studies demonstrate the method's effectiveness, reducing printing time considerably without affecting the part quality. A static priority strategy is implemented, where one extruder gets priority over the other using a cascade process. The results of this paper demonstrate that different priority strategies reflect on the printing efficiency by a factor equal to the number of extrusion heads.

To the best of the authors’ knowledge, this is the first study to produce an original methodology to efficiently plan the extrusion heads' trajectories for a collaborative material extrusion architecture.

The tear strength (Ts) is a significant property for any kind of soft polymeric material such as rubber, elastomer, viscoelastic material and its composites, to quantify the suitability of a material for any shape memory applications. Many times, the soft elastomeric polymer material has to be capable enough to deform to a maximum extent of displacement but at the same time, it has to withstand the maximum load without fail. Along with shape recovery properties (i.e. the ability to recover its shape from programmed to the original), the success of the shape memory cycle is mainly depending on its stiffness and strength. It has to resist tear during stretching (i.e. programming stage) as repeatedly subjected to deformation, and, hence, it is important to study the tear behaviour for shape memory polymers (SMPs) and their composites. The purpose of the work is to investigate the effect of parameters on Ts of 4D printed specimen using Taguchi method.

The objective of the work is to tailor the Ts of SMPs by reinforcing the graphene nano particles (GNPs) in a blended photopolymer (PP) resin with flexible PP and hard PP resin. In this study, a total of nine experiments were designed based on the L9 orthogonal array (OA) using the design of experiments (DOEs). All the shape memory photopolymer composite’s (SMPPCs) specimens are fabricated using masked stereolithography (MSLA), also known as resin three-dimensional printing (R3DP) technique.

Specimens are tested using universal testing machine (UTM) for maximum tear force (F_max) and displacement (δ) caused by tearing the specimen to evaluate the strength against the tear. The results showed that the Wt.% of resin blend highly influenced both F_max and δ, while GNPs also had an impact on δ. The specimens are offering more tear resistance for those specimens blended with less Wt.% of flexible PP at the same time the specimens enable more δ for those specimens reinforced with 0.3 Wt.% GNPs at 10-s exposure time. The optimum combinations are A1, B1 and C3 for the F_max and T_s and at the same time A1, B3 and C3 for δ.

To customise the tear resistance of SMPPCs using MSLA 3 D printing, this study suggested a blend of PP resins reinforced with GNPs. This opens up a new path for creating novel, inexpensive multi-functional 4-dimensional (4D) printed parts.

The use of flexible PP and hard PP resin blends, fabricating the SMPPCs specimens using 3 D printed MSLA technology, investigating the effect of GNPs, resin blend and exposure time, optimizing the process parameters using Taguchi and the work were all validated using confirmation tests and regression analysis using test train method, which increases the originality and novelty.

A review on additive manufacturing (AM) of shape memory polymer composites (SMPCs) is put forward to highlight the progress made up to date, conduct a critical review and show the limitations and possible improvements in the different research areas within the different AM techniques. The purpose of this study is to identify academic and industrial opportunities.

This paper introduces the reader to three-dimensional (3 D) and four-dimensional printing of shape memory polymers (SMPs). Specifically, this review centres on manufacturing technologies based on material extrusion, photopolymerization, powder-based and lamination manufacturing processes. AM of SMPC was classified according to the nature of the filler material: particle dispersed, i.e. carbon, metallic and ceramic and long fibre reinforced materials, i.e. carbon fibres. This paper makes a distinction for multi-material printing with SMPs, as multi-functionality and exciting applications can be proposed through this method. Manufacturing strategies and technologies for SMPC are addressed in this review and opportunities in the research are highlighted.

This paper denotes the existing limitations in the current AM technologies and proposes several directions that will contribute to better use and improvements in the production of additive manufactured SMPC. With advances in AM technologies, gradient changes in material properties can open diverse applications of SMPC. Because of multi-material printing, co-manufacturing sensors to 3D printed smart structures can bring this technology a step closer to obtain full control of the shape memory effect and its characteristics. This paper discusses the novel developments in device and functional part design using SMPC, which should be aided with simple first stage design models followed by complex simulations for iterative and optimized design. A change in paradigm for designing complex structures is still to be made from engineers to exploit the full potential of additive manufactured SMPC structures.

Advances in AM have opened the gateway to the potential design and fabrication of functional parts with SMPs and their composites. There have been many publications and reviews conducted in this area; yet, many mainly focus on SMPs and reserve a small section to SMPC. This paper presents a comprehensive review directed solely on the AM of SMPC while highlighting the research opportunities.