Search results
1 – 9 of 9The ruling conservative People Power Party (PPP) will take scant consolation from avoiding an opposition supermajority, as it needed a win to take control of the assembly and…
Details
DOI: 10.1108/OXAN-DB286397
ISSN: 2633-304X
Keywords
Geographic
Topical
Meanwhile, the leader of the opposition and a ruling party lawmaker have been hospitalised after serious assaults (in the former case, politically motivated). There are also…
Details
DOI: 10.1108/OXAN-DB284941
ISSN: 2633-304X
Keywords
Geographic
Topical
Yoon’s gaffes and misjudgements have cost him support ahead of the polls, although turnout and the impact of third parties remain possible swing factors.
Details
DOI: 10.1108/OXAN-DB286182
ISSN: 2633-304X
Keywords
Geographic
Topical
Korea’s Institute for Basic Science (IBS), the first research institute dedicated to basic science in Korea, started ten years ago as part of a science policy called the Science…
Abstract
Purpose
Korea’s Institute for Basic Science (IBS), the first research institute dedicated to basic science in Korea, started ten years ago as part of a science policy called the Science Belt. It is noteworthy that Korea, with a short history of basic science, established such a research institute exclusively for basic science within a short period of time and made it one of the representative institutions of basic science in Korea. This paper aims to uncover the impetuses and constraints surrounding the policy of Science Belt, centering on the IBS.
Design/methodology/approach
Kingdon’s stream theory is used to clarify the factors that acted as impetuses or constraints for the Science Belt. For the analysis, in-depth interviews with the active policy participants were conducted in addition to the thorough literature review. The interviews enabled an in-depth understanding of the underlying factors for the Science Belt and the actual procedures of the policy decision.
Findings
This study found that the most powerful impetus in the Science Belt policymaking process was the President and a small group composed of a few scientists who played a leading role in the political stream. The constraint of the Science Belt was that the participation of scientist experts and governmental officials, the so-called invisible participants of Kingdon, was insignificant. In particular, there was no system in place to select policy alternatives for basic science through discussion between scientists and governmental officials.
Research limitations/implications
The temporal scope of this study was limited to policy formation, that is, until the establishment of IBS. Therefore, future studies shall conduct a research on the implementation of the actual policy, IBS’s achievements and IBS’s impact of Korea’s basic science community.
Originality/value
This study applied both a theoretical framework and in-depth interviews along with the literature overview to understand a policymaking process from various angles.
Details
Keywords
SOUTH KOREA: Opposition win will frustrate government
Details
DOI: 10.1108/OXAN-ES286379
ISSN: 2633-304X
Keywords
Geographic
Topical
The main issue in the mass customization of apparel products is how to efficiently produce products of various sizes. A parametric pattern-making system is one of the notable ways…
Abstract
Purpose
The main issue in the mass customization of apparel products is how to efficiently produce products of various sizes. A parametric pattern-making system is one of the notable ways to rectify this issue, but there is a lack of information on the parametric design itself and its application to the apparel industry. This study compares and analyzes three types of parametric clothing pattern CAD (P-CAD) software currently in use to identify the characteristics of each, and suggest a basic guideline for efficient and adaptable P-CAD software in the apparel industry.
Design/methodology/approach
This study compared three different types of P-CAD software with different characteristics: SuperALPHA: PLUS(as known as YUKA), GRAFIS and Seamly2D. The authors analyzed the types and management methodologies of each software, according to the three essential components that refer to previous studies about parametric design systems: entities, constraints and parameters.
Findings
The results demonstrated the advantages and disadvantages of methodology in terms of three essential components of each software. Based on the results, the authors proposed five strategies for P-CAD development that can be applied to the mass customization of clothing.
Originality/value
This study is meaningful in that it consolidates and organizes information about P-CAD software that has previously been scattered. The framework used in this study has an academic value suggesting guidelines to analyze P-CAD systems.
Details
Keywords
Shinyong Jung, Alei Fan, Xinran Lehto and Hhye Won Shin
This study aims to explore a potential conference experience design strategy, namely, festivalization. It investigates the potential festivalization effects on conference…
Abstract
Purpose
This study aims to explore a potential conference experience design strategy, namely, festivalization. It investigates the potential festivalization effects on conference attendees in two formats of business conferences: virtual and in-person.
Design/methodology/approach
A series of two scenario-based experimental studies were conducted. A series of one-way analysis of covariance and PROCESS procedures (Model 6) were performed for data analysis.
Findings
The inclusion of festivalization elements significantly enhances positive responses of attendees, especially for in-person conferences. This effect is further explained by a serial mediation effect, where enhanced perceived values and conference engagement play key roles in improving attendees’ conference experience.
Practical implications
By incorporating festivalization elements, conference organizers can create a more engaging and satisfying event experience for attendees. This can lead to greater satisfaction, positive word-of-mouth and increased registrations.
Originality/value
This study represents a pioneering effort in revealing the underlining mechanisms that explain how festivalization affects attendee engagement and subsequent behaviors in business event management in both face-to-face and virtual settings.
Details
Keywords
Vimal Kumar Deshmukh, Mridul Singh Rajput and H.K. Narang
The purpose of this paper is to present current state of understanding on jet electrodeposition manufacturing; to compare various experimental parameters and their implication on…
Abstract
Purpose
The purpose of this paper is to present current state of understanding on jet electrodeposition manufacturing; to compare various experimental parameters and their implication on as deposited features; and to understand the characteristics of jet electrodeposition deposition defects and its preventive procedures through available research articles.
Design/methodology/approach
A systematic review has been done based on available research articles focused on jet electrodeposition and its characteristics. The review begins with a brief introduction to micro-electrodeposition and high-speed selective jet electrodeposition (HSSJED). The research and developments on how jet electrochemical manufacturing are clustered with conventional micro-electrodeposition and their developments. Furthermore, this study converges on comparative analysis on HSSJED and recent research trends in high-speed jet electrodeposition of metals, their alloys and composites and presents potential perspectives for the future research direction in the final section.
Findings
Edge defect, optimum nozzle height and controlled deposition remain major challenges in electrochemical manufacturing. On-situ deposition can be used as initial structural material for micro and nanoelectronic devices. Integration of ultrasonic, laser and acoustic source to jet electrochemical manufacturing are current trends that are promising enhanced homogeneity, controlled density and porosity with high precision manufacturing.
Originality/value
This paper discusses the key issue associated to high-speed jet electrodeposition process. Emphasis has been given to various electrochemical parameters and their effect on deposition. Pros and cons of variations in electrochemical parameters have been studied by comparing the available reports on experimental investigations. Defects and their preventive measures have also been discussed. This review presented a summary of past achievements and recent advancements in the field of jet electrochemical manufacturing.
Details
Keywords
Jiayue Zhao, Yunzhong Cao and Yuanzhi Xiang
The safety management of construction machines is of primary importance. Considering that traditional construction machine safety monitoring and evaluation methods cannot adapt to…
Abstract
Purpose
The safety management of construction machines is of primary importance. Considering that traditional construction machine safety monitoring and evaluation methods cannot adapt to the complex construction environment, and the monitoring methods based on sensor equipment cost too much. This paper aims to introduce computer vision and deep learning technologies to propose the YOLOv5-FastPose (YFP) model to realize the pose estimation of construction machines by improving the AlphaPose human pose model.
Design/methodology/approach
This model introduced the object detection module YOLOv5m to improve the recognition accuracy for detecting construction machines. Meanwhile, to better capture the pose characteristics, the FastPose network optimized feature extraction was introduced into the Single-Machine Pose Estimation Module (SMPE) of AlphaPose. This study used Alberta Construction Image Dataset (ACID) and Construction Equipment Poses Dataset (CEPD) to establish the dataset of object detection and pose estimation of construction machines through data augmentation technology and Labelme image annotation software for training and testing the YFP model.
Findings
The experimental results show that the improved model YFP achieves an average normalization error (NE) of 12.94 × 10–3, an average Percentage of Correct Keypoints (PCK) of 98.48% and an average Area Under the PCK Curve (AUC) of 37.50 × 10–3. Compared with existing methods, this model has higher accuracy in the pose estimation of the construction machine.
Originality/value
This study extends and optimizes the human pose estimation model AlphaPose to make it suitable for construction machines, improving the performance of pose estimation for construction machines.
Details