Search results

This study aims to minimize the transportation-related cost in distribution while utilizing a heterogeneous fixed fleet to deliver distinct demand at different geographical locations with a proper workload balancing approach. An increased cost in distribution is a major problem for many companies due to the absence of efficient planning methods to overcome operational challenges in distinct distribution networks. The problem addressed in this study is to minimize the transportation-related cost in distribution while using a heterogeneous fixed fleet to deliver distinct demand at different geographical locations with a proper workload balancing approach which has not gained the adequate attention in the literature.

This study formulated the transportation problem as a vehicle routing problem with a heterogeneous fixed fleet and workload balancing, which is a combinatorial optimization problem of the NP-hard category. The model was solved using both the simulated annealing and a genetic algorithm (GA) adopting distinct local search operators. A greedy approach has been used in generating an initial solution for both algorithms. The paired t-test has been used in selecting the best algorithm. Through a number of scenarios, the baseline conditions of the problem were further tested investigating the alternative fleet compositions of the heterogeneous fleet. Results were analyzed using analysis of variance (ANOVA) and Hsu’s MCB methods to identify the best scenario.

The solutions generated by both algorithms were subjected to the t-test, and the results revealed that the GA outperformed in solution quality in planning a heterogeneous fleet for distribution with load balancing. Through a number of scenarios, the baseline conditions of the problem were further tested investigating the alternative fleet utilization with different compositions of the heterogeneous fleet. Results were analyzed using ANOVA and Hsu’s MCB method and found that removing the lowest capacities trucks enhances the average vehicle utilization with reduced travel distance.

The developed model has considered both planning of heterogeneous fleet and the requirement of work load balancing which are very common industry needs, however, have not been addressed adequately either individually or collectively in the literature. The adopted solution methodologies to solve the NP-hard distribution problem consist of metaheuristics, statistical analysis and scenario analysis are another significant contribution. The planning of distribution operations not only addresses operational-level decision, through a scenario analysis, but also strategic-level decision has also been considered.

The planning of distribution operations not only addresses operational-level decisions, but also strategic-level decisions conducting a scenario analysis.

This paper aims to focus on a medical goods distribution problem and pharmacological waste collection by plug-in hybrid vehicles with some real-world restrictions. In this research, considering alternative energy sources and simultaneous pickup and delivery led to a decrease in greenhouse gas emissions and distribution costs, respectively.

Here, this problem has been modeled as mixed-integer linear programming with the traveling and energy consumption costs objective function. The GAMS was used for model-solving in small-size instances. Because the problem in this research is an NP-hard problem and solving real-size problems in a reasonable time is impossible, in this study, the artificial bee colony algorithm is used.

Then, the algorithm results are compared with a simulated annealing algorithm that recently was proposed in the literature. Finally, the results obtained from the exact solution and metaheuristic algorithms are compared, analyzed and reported. The results showed that the artificial bee colony algorithm has a good performance.

In this paper, medical goods distribution with pharmacological waste collection is studied. The paper was focused on plug-in hybrid vehicles with simultaneous pickup and delivery. The problem was modeled with environmental criteria. The traveling and energy consumption costs are considered as an objective function.

Distribution network design involves a set of strategic decisions in supply chains because of their long-term impacts on the total logistics cost and environment. To incorporate a trade-off between financial and environmental aspects of these decisions, this paper aims to determine an optimal location, among candidate locations, of a new logistics center, its capacity, as well as optimal network flows for an existing distribution network, while concurrently minimizing the total logistics cost and gas emission. In addition, uncertainty in transportation and warehousing costs are considered.

The problem is formulated as a fuzzy multiobjective mathematical model. The effectiveness of this model is demonstrated using an industrial case study. The problem instance is a four-echelon distribution network with 22 products and a planning horizon of 20 periods. The model is solved by using the min–max and augmented ε-constraint methods with CPLEX as the solver. In addition to illustrating model’s applicability, the effect of choosing a new warehouse in the model is investigated through a scenario analysis.

For the applicability of the model, the results indicate that the augmented ε-constraint approach provides a set of Pareto solutions, which represents the ideal trade-off between the total logistics cost and gas emission. Through a case study problem instance, the augmented ε-constraint approach is recommended for similar network design problems. From a scenario analysis, when the operational cost of the new warehouse is within a specific fraction of the warehousing cost of third-party warehouses, the solution with the new warehouse outperforms that without the new warehouse with respective to financial and environmental objectives.

The proposed model is an effective decision support tool for management, who would like to assess the impact of network planning decisions on the performance of their supply chains with respect to both financial and environmental aspects under uncertainty.

Based on the principle of equality, individuals with disabilities have the right to equal job opportunities and career advancements and to actively participate in the economy like other members of society. This study aims to provide an integrated description of discriminatory occupational practices and behaviours that individuals with disabilities face. This study followed the descriptive analytical approach to achieve the objectives. A questionnaire was used for data collection purposes.

The target population for this study was male and female employees with disabilities working in the Jordanian Government sector for the years 2019–2022 in all governorates of Jordan. The sample method used was purposive-convenient random sampling, and the size of the sample valid for statistical analysis was n = 1,043. Using the Statistical Package for Social Sciences (v26), a number of statistical tests were conducted to infer the features of the researched phenomenon.

This study found an overall moderate level (mean = 2.76) of practices and behaviours of job discrimination against individuals with disabilities in the Jordanian public sector. All proposed practices and behaviours were at moderate levels of agreement, with the highest discriminatory behaviours being in the areas of training and learning opportunities (2.88), followed by job performance evaluation (2.84), work leave and vacation (2.75), integration and social participation (2.74), career advancement and promotion (2.73) and, last, the distribution of tasks and responsibilities (2.61). Furthermore, it was found that there are significant differences in the levels of discriminatory practices and behaviours towards people with physical disabilities, individuals with visual impairments and psychological disabilities, new employees at work and those with a low level of education. In addition, employees at higher administrative levels (manager, deputy/assistant manager and head of department/division) and workers in the southern and central governorates are exposed to the highest levels of discrimination.

Lack of data: There is often a lack of reliable and comprehensive data on employees with disabilities, making it difficult for researchers to accurately study and understand the experiences of this population. Stigma and discrimination: People with disabilities often face stigma and discrimination, which can make it challenging for researchers to engage with them and collect accurate information.

Moreover, it was found that the main agencies to which cases of discriminatory practices towards individuals with disabilities working in the Jordanian public sector are reported are the direct managers/supervisors (n = 381), the ministry to which the institution/department belongs (n = 278) and the Higher Council for the Rights of Persons with Disabilities (n = 261).

Supporting social inclusion: Employment can provide a sense of purpose, identity and social inclusion for people with disabilities, which can have a positive impact on their disabilities and overall quality of life. Improving diversity and inclusion: The inclusion of employees with disabilities can contribute to a more diverse and inclusive workplace, where all employees feel valued and respected.

This study found that discriminatory practices against employees with disabilities in the Jordanian public sector were largely because of a lack of awareness of reporting mechanisms and negative attitudes towards individuals with disabilities. This study proposes solutions such as raising awareness among non-disabled employees, implementing penalties for discriminatory behaviour and updating legislation for the rights of individuals with disabilities.

The public distribution system (PDS) is an Indian food security system established to manage the distribution of food grains at affordable prices. As a result of the population explosion, the long-established PDS system finds it challenging to maintain operational efficiency, quality, trust and transparency. This paper explores the possibility of leveraging blockchain technology to overcome these operational hurdles.

Through a literature review and expert interactions, the present research identifies critical success factors in terms of enablers and barriers that influence the adoption of blockchain technology in PDS. Furthermore, we propose two independent interpretive structural models (ISM) and MICMAC to characterize these attributes.

The research identifies 15 distinct enablers and ten barriers that influence the diffusion of the latest technology in the sector at focus. The analyses disclose the interrelationships/dependencies among these enablers and between barriers, along with their individual driving power and dependence power.

The research showcases the importance of automating the system and illustrates how the features of blockchain technology can assist in augmenting stakeholder satisfaction levels. However, poor or nonexistent government regulations and patronage are found to be the major impediments to adoption. The research also delineates the cost implications of this barrier through its interrelationships with other barriers.

Interesting inferences are drawn from the models that offer actionable insights for the industry, government and technologists for improving PDS performance. Such interventions will ensure national food security through enhanced trust and transparency, which can further improve efficiency and effectiveness.

This paper aims to propose the mechanism of cross-network effect embedded, which can help cross-border e-commerce (CBEC) platforms strengthen cooperative relationships with sellers more equitably and effectively by using the network structural characteristics of the platforms themselves.

A two-stage evolutionary game model has been used to confirm the influence factors. The mathematical derivation of evolutionary game analysis is combined with the simulation method to examine the role of cross-network effect in cooperation. The evolutionary game model based on the cross-network effect is proposed to achieve better adaptability to the study of cooperation strategy from the two-sided market perspective.

The evolutionary game model captures the interactions of cross-network effect and the influence factors from a dynamic perspective. The cross-network effect has a certain substitution on the revenue-sharing rate of SMEs. CBEC platforms can enhance the connection between consumers and the website by improving the level of construction, which is a good way to attract sellers more cost-effectively and efficiently.

This study provides a new method for the validation of the cross-network effect, especially when data collection is difficult. But this method is only a numerical simulation. So the conclusions still need to be further tested empirically. Besides, researchers are advised to explore the relationship between the added user scale and the cross-network effect in some specificCBEC platforms.

This study provides a new method for the validation of the cross-network effect, especially when data collection is difficult. But this method is only a numerical simulation. So the conclusions still need to be further tested empirically. Besides, researchers are advised to explore the relationship between the added user scale and the cross-network effect in some specific CBEC platforms.

Investigations that study cooperation strategy from the cross-network effect perspective in CBEC are limited. The research figured out which influence factors are affected by the cross-network effect in cooperation. A two-stage evolutionary game model was proposed to explain the interaction of the factors. The evolutionary game analysis with a simulation method was combined to highlight the role of cross-network effect on cooperation strategy to give a deeper investigation into the sustainable cooperation ofCBEC.

This paper aims to explore the process of implementing solar photovoltaic (PV) systems in construction to contribute to the understanding of systemic innovation in construction.

The exploratory research presented is based on qualitative data collected in workshops and interviews with 76 construction- and solar-industry actors experienced in solar PV projects. Actor-specific barriers were identified and analysed using an abductive approach.

In light of established definitions of systemic innovation, the process of implementing solar PV systems in construction involves challenges regarding technical and material issues, competencies, and informal and formal institutions. The specificities of this case highlight the necessity of paying attention to details in the process and to develop knowledge of systemic innovation in construction since the industry’s involvement in addressing societal challenges related to the energy transition will require implementing such innovations much more in the future.

New knowledge of solar PV systems as an innovation in professional construction is collected, enabling the adaptation of management strategies for its implementation. This knowledge can also be applied generally to other challenges encountered in highly systemic innovation implementation. Solar industry actors can gain an understanding of solar-specific challenges for the construction industry, challenges for which they must adapt their activities.

The exploration of actor-specific experiences of solar PV projects has resulted in a novel understanding of this specific innovation and its implementation. The findings illustrate a case of a high level of systemic innovation and the need to use a finer-grained scale for classification when studying innovation in construction.

The total defence (TD) concept constitutes a joint endeavour between the military forces and civil defence structures within a TD state. Logistics is essential for such joint collaboration to work; however, the mismatch between military and civil defence logistics structures poses challenges for such joint collaboration. The purpose of this paper is to identify logistics concept areas within the TD framework that allow for military and civil defence collaborations from a logistics operations perspective.

Pattern-matching analysis is used to compare patterns found in the investigated case with those prescribed from the literature and predicted to occur. The study seeks to identify logistics concepts within TD from the literature and from the events describing the Swedish response to the Covid-19 pandemic. Pattern matching thus allows for the reconciliation of logistics concepts from the literature to descriptions of how the response was handled, albeit under a TD framework.

Findings show quite distinct foci between the theoretical and observational realms in terms of logistics applications. While the theoretical realm identifies four main logistics concepts, the observational realm identifies five logistics conceptual themes. This goes on to show an incongruence between the military and civil parts of the TD.

This study provides basis for further research into the applications and management of logistics activity within TD and emergency response.

Logistics applications within TD have not, until now, received much attention in the literature. Given this knowledge gap, this study is of original value.

This paper forms an e-commerce supply chain that include a manufacturer providing products and an online platform providing service. The reselling platform mode and the agent platform mode are considered through an exploration of the manufacturer Stackelberg (MS), vertical Nash (VN), platform Stackelberg (PS) power structures. The purpose of this paper is to explore the pricing and platform service decisions under different platform selling modes and channel power structures.

Based on the game theory models, this paper investigates the interaction between the manufacturer and the online platform under four different scenarios. The optimal solutions of four models are provided. Through comparison analyses, this paper evaluates the impacts of platform selling mode and channel power structure on the pricing and platform service decisions and the members’ profits.

The manufacturer prefers the MS power structure in any platform mode. The online platform prefers the PS (MS) power structure under a low (high) service cost efficiency in the reselling platform mode, while prefers the PS and VN power structures in the agent platform mode. Moreover, the manufacturer prefers the agent (reselling) platform mode under a low (high) service cost efficiency in any power structure. The online platform prefers the reselling platform mode in the MS and PS power structures, while prefers the reselling (agent) platform mode under a low (high) service cost efficiency in the VN power structures.

The analysis result provides important managerial implications that help the supply chain members develop a better understanding of the selection of the platform selling mode and the effect of the channel power structure in the presence of platform service.