Search results

Congestion at Ghana’s main seaports is a problem that has received much attention recently. This is as a result of continuous increase in containerized cargo. To increase the capacity of Ghana’ seaport, the Ministry of Transport through the Ghana Shippers Council initiated the Boankra Inland Port Project. The aim of this paper is to assess the feasibility and economic effects of implementing the Boankra Inland Port as a solution to reduce congestion at the main seaports, as well as reduce transportation cost.

The location of the inland port was assessed using the gravitational model. Data for the gravitational model are distances from the main seaports in Ghana and Boankra Inland Port to major hinterland destinations and population of the destinations. Also, 210 respondents were selected and interviewed on contribution of the dry port concept to the economy and transportation management in Ghana.

The results of the gravitational model support the location of Boankra as an inland port. A further comparison between Tema and Takoradi shows that Tema has a better location as a distribution center than Takoradi.

Although Tema and Takoradi are the main seaports in Ghana, the implementation of the Boankra inland port will reduce the transportation cost for cargo with hinterland destinations, therefore making it a rational and cost-efficient location for transit transportation.

This paper is among the first significant attempts to evaluate the suitability of inland port implementation in Ghana.

To assess the introduction and performance of light electric freight vehicles (LEFVs), more specifically cargo cycles in major 3PL organizations in at least two Nordic countries.

Case studies. Interviews. Company data on performance before as well as after the introduction. Study of differing business models as well as operational setups.

The results from the studied cases show that LEFVs can compete with conventional vans in last mile delivery operations of e-commerce parcels. We account for when this might be the case, during which circumstances and why.

Inherent limitations of the case study approach, specifically on generalization. Future research to include more public–private partnership and multi-actor approach for scalability.

Adding to knowledge on the public sector facilitation necessary to succeed with implementation and identifying cases in which LEFVs might offer efficiency gains over more traditional delivery vehicles.

One novelty is the access to detailed data from before the implementation of new vehicles and the data after the implementation. A fair comparison is made possible by the operational structure, area of delivery, number of customers, customer density, type of packages, and to some extent, the number of packages being quite similar. Additionally, we provide data showing how city hubs can allow cargo cycles to work synergistically with delivery vans. This is valuable information for organizations thinking of trying LEFVs in operations as well as municipalities/local authorities that are interested.

Designing an efficient routing protocol that opportunistically forwards data to the destination node through nearby sensor nodes or devices is significantly important for an effective incidence response and disaster recovery framework. Existing sensor routing protocols are mostly not effective in such disaster recovery applications as the networks are affected (destroyed or overused) in disasters such as earthquake, flood, Tsunami and wildfire. These protocols require a large number of message transmissions to reestablish the clusters and communications that is not energy efficient and result in packet loss. This paper introduces ODCR - an energy efficient and reliable opportunistic density clustered-based routing protocol for such emergency sensor applications. We perform simulation to measure the performance of ODCR protocol in terms of network energy consumptions, throughput and packet loss ratio. Simulation results demonstrate that the ODCR protocol is much better than the existing TEEN, LEACH and LORA protocols in term of these performance metrics.

To discuss subcopula estimation for discrete models.

The convergence of estimators is considered under the weak convergence of distribution functions and its equivalent properties known in prior works.

The domain of the true subcopula associated with discrete random variables is found to be discrete on the interior of the unit hypercube. The construction of an estimator in which their domains have the same form as that of the true subcopula is provided, in case, the marginal distributions are binomial.

To the best of our knowledge, this is the first time such an estimator is defined and proved to be converged to the true subcopula.

The purpose of this paper investigates dynamic ease distributions of clothes at bust and waist lines with different body surface angle by using a Qualisys three-dimensional motion capture system (3DMCS).

The current method first obtain the specific markers of participants and their clothes along the bust and waist lines through 3DMCS, then using the least square method and four piecewise polynomial fitting participants and their clothes' bust and waist curves. The coordinates of the markers were tracked by the 3DMCS, while the participants under different body surface angle walked on a treadmill calculated the distances of markers coordinates to the participants' bust and waist curves. Finally, the data of samples were analyzed. It was found that the dynamic ease distributions showed different patterns at different body surface angle.

The results revealed the bust convex angle is 26.53 degrees (Specification:X3) and back slope angle is 13.96 degrees (Specification: Y1), the fluctuation of participant ease distributions on bust section was most obvious, and the maximum fluctuation value was ±20 mm and ±25 mm. The ease distributions of participant waist section fluctuated most obviously when the bust convex angle is 28.10 degrees (Specification: X5) and the back slope angle is 13.96 degrees (Specification: Y1), and the maximum fluctuation was ±30 mm and ±20 mm. The bust convex angle has the greatest influence on 1# garment, and the back slope angle has the greatest influence on 2# garment.

Currently, there is little information in the literature about dynamic ease distributions of garment on a different body types. This paper takes different body surface angles as the research objects to analyze the ease distributions of different clothes, the conclusion can provide reference data for 3D garment modeling and improve the authenticity of virtual garment fitting.

The purpose of this study is to establish a systematic framework to characterise the safety of air routes, in terms of separation minima infringements (SMIs) between en-route aircraft, based on the definition of models known as safety performance functions.

Techniques with high predictive capability were selected that enable both expert knowledge and data to be harnessed: Bayesian networks. It was necessary to establish a conceptual framework that integrates the knowledge currently available on the causality and precursors of SMIs with the hindsight derived from the analysis of the type of data available. To translate the conceptual framework into a set of causal subnets, the concepts of air traffic management (ATM) barrier model and event trees have been incorporated.

The model combines analytics and insights, as well as predictive capability, to answer the question of how airspace separation infringements are produced and what their frequency of occurrence will be. The main outputs of the network are the predicted probability of success for the ATM barriers and the predicted probability distribution of the vertical and horizontal separation of an aircraft in its closest point of approach.

The main contribution of this work is that, by virtue of the calculation capacity obtained, the network can be used to draw conclusions about the impact that a modification of the airspace and of the traffic, or operational conditions, would have on the effectiveness of the barriers and on the final distributions of distance between aircraft in the CPA, thereby estimating the probability of SMI.

People seem to function according to different models, which implies that in business and social sciences, heterogeneity is a rule rather than an exception. Researchers can investigate such heterogeneity through multigroup analysis (MGA). In the context of partial least squares path modeling (PLS-PM), MGA is currently applied to perform multiple comparisons of parameters across groups. However, this approach has significant drawbacks: first, the whole model is not considered when comparing groups, and second, the family-wise error rate is higher than the predefined significance level when the groups are indeed homogenous, leading to incorrect conclusions. Against this background, the purpose of this paper is to present and validate new MGA tests, which are applicable in the context of PLS-PM, and to compare their efficacy to existing approaches.

The authors propose two tests that adopt the squared Euclidean distance and the geodesic distance to compare the model-implied indicator correlation matrix across groups. The authors employ permutation to obtain the corresponding reference distribution to draw statistical inference about group differences. A Monte Carlo simulation provides insights into the sensitivity and specificity of both permutation tests and their performance, in comparison to existing approaches.

Both proposed tests provide a considerable degree of statistical power. However, the test based on the geodesic distance outperforms the test based on the squared Euclidean distance in this regard. Moreover, both proposed tests lead to rejection rates close to the predefined significance level in the case of no group differences. Hence, our proposed tests are more reliable than an uncontrolled repeated comparison approach.

Current guidelines on MGA in the context of PLS-PM should be extended by applying the proposed tests in an early phase of the analysis. Beyond our initial insights, more research is required to assess the performance of the proposed tests in different situations.

This paper contributes to the existing PLS-PM literature by proposing two new tests to assess multigroup differences. For the first time, this allows researchers to statistically compare a whole model across groups by applying a single statistical test.

Building on recent advances in inverse probability weighted identification and estimation of counterfactual distributions, the authors examine the history of wage earnings for women and their potential wage distributions in the United States. These potentials are two counterfactuals, what if women received men’s market “rewards” for their own “skills,” and what if they received the women’s rewards but for men’s characteristics? Using the Current Population Survey data from 1976 to 2013, the authors analyze the entire counterfactual distributions to separate the “structure” and human capital “composition” effect. In contrast to Maasoumi and Wang (2019), the reference outcome in these decompositions is women’s observed earnings distribution, and inverse probability methods are employed, rather than the conditional quantile approaches. The authors provide decision theoretic measures of the distance between two distributions, to complement assessments based on mean, median, or particular quantiles. We assess uniform rankings of alternate distributions by tests of stochastic dominance in order to identify evaluations robust to subjective measures. Traditional moment-based measures severely underestimate the declining trend of the structure effect. Nevertheless, dominance rankings suggest that the structure (“discrimination”?) effect is bigger than human capital characteristics.

This study aimed to develop the integration of the multiperiod production-distribution model in a closed-loop supply chain involving carbon emission and traceability. The developed model was for agricultural food (agri-food) products, considering the reverse flow of food waste from the disposal center (composting center) to producers.

The results indicate that integrating the production and distribution model considering food waste recycling provides low carbon emissions in lower total costs. The sensitivity analysis also found that there are trade-offs between production and distribution rate and food waste levels on carbon emission and traceability.

This study focuses on the mathematical modeling of a multiperiod production-distribution formulation for a closed-loop supply chain.

The model of the agri-food closed-loop supply chain in this study that considers food recycling and carbon emissions would help stakeholders involved in the agri-food supply chain to reduce food waste and carbon emissions.

This paper proposes an approach to solve the vehicle routing problem with simultaneous pickup and delivery (VRPSPD) in the context of the Physical Internet (PI) supply chain. The main objective is to minimize the total distribution costs (transportation cost and holding cost) to supply retailers from PI hubs.

Mixed integer programming (MIP) is proposed to solve the problem in smaller instances. A random local search (RLS) algorithm and a simulated annealing (SA) metaheuristic are proposed to solve larger instances of the problem.

The results show that SA provides the best solution in terms of total distribution cost and provides a good result regarding holding cost and transportation cost compared to other heuristic methods. Moreover, in terms of total carbon emissions, the PI concept proposed a better solution than the classical supply chain.

The sustainability of the route construction applied to the PI is validated through carbon emissions.

This approach also relates to the main objectives of transportation in the PI context: reduce empty trips and share transportation resources between PI-hubs and retailers. The proposed approaches are then validated through a case study of agricultural products in Thailand.

This approach is also relevant with the reduction of driving hours on the road because of share transportation results and shorter distance than the classical route planning.

This paper addresses the VRPSPD problem in the PI context, which is based on sharing transportation and storage resources while considering sustainability.