Search results

This paper aims to design an active shock absorber scheme for use in conjunction with a passive shock absorber to suppress the horizontal vibration of elevator cars in a smaller range and shorter time. The developed active shock absorber will also improve the safety and comfort of passengers driving in ultra-high-speed elevators.

A six-degree of freedom dynamic model is established according to the position and condition of the car. Then the active shock absorber and disturbance compensation-based adaptive control scheme are designed and simulated in MATLAB/Simulink. The results are analysed and compared with the traditional shock absorber.

The results show that, compared with traditional spring-based passive damping systems, the designed active shock absorber can reduce vibration displacement by 60%, peak acceleration by 50% and oscillation time by 2/3 and is more robust to different spring stiffness, damping coefficient and load.

The developed active shock absorber and its control algorithm can significantly reduce vibration amplitude and converged time. It can also adjust the damping strength according to the actual load of the elevator car, which is more suitable for high-speed elevators.

Selective laser sintering (SLS) is an essential technology in the field of additive manufacturing. However, SLS technology is limited by the traditional point-laser sintering method and has reached the bottleneck of efficiency improvement. This study aims to develop an image-shaped laser sintering (ISLS) system based on a digital micromirror device (DMD) to address this problem. The ISLS system uses an image-shaped laser light source with a size of 16 mm × 25.6 mm instead of the traditional SLS point-laser light source.

The ISLS system achieves large-area image-shaped sintering of polymer powder materials by moving the laser light source continuously in the x-direction and updating the sintering pattern synchronously, as well as by overlapping the splicing of adjacent sintering areas in the y-direction. A low-cost composite powder suitable for the ISLS system was prepared using polyether sulfone (PES), pinewood and carbon black (CB) powders as raw materials. Large-sized samples were fabricated using composite powder, and the microstructure, dimensional accuracy, geometric deviation, density, mechanical properties and feasible feature sizes were evaluated.

The experimental results demonstrate that the ISLS system is feasible and can print large-sized parts with good dimensional accuracy, acceptable geometric deviations, specific small-scale features and certain density and mechanical properties.

This study has achieved the transition from traditional point sintering mode to image-shaped surface sintering mode. It has provided a new approach to enhance the system performance of traditional SLS.

Contemporary technological disruptions are espoused as though they stimulate sustainable growth in the built environment through the Green Internet of Things (G-IoT). Learning from discipline-specific experiences, this paper articulates recent advancements in the knowledge and concepts of G-IoT in relation to the construction and smart city sectors. It provides a scoping review for G-IoT as an overlooked dimension. Attention was paid to modern circularity, cleaner production and sustainability as key benefits of G-IoT adoption in line with the United Nations’ Sustainable Development Goals (UN-SDGs). In addition, this study also investigates the current application and adoption strategies of G-IoT.

This study uses the Preferred Reporting Items for Systematic and Meta-Analyses (PRISMA) review approach. Resources are drawn from Scopus and Web of Science repositories using apt search strings that reflect applications of G-IoT in the built environment in relation to construction management, urban planning, societies and infrastructure. Thematic analysis was used to analyze pertinent themes in the retrieved articles.

G-IoT is an overlooked dimension in construction and smart cities so far. Thirty-three scholarly articles were reviewed from a total of 82 articles retrieved, from which five themes were identified: G-IoT in buildings, computing, sustainability, waste management and tracking and monitoring. Among other applications, findings show that G-IoT is prominent in smart urban services, healthcare, traffic management, green computing, environmental protection, site safety and waste management. Applicable strategies to hasten adoption include raising awareness, financial incentives, dedicated work approaches, G-IoT technologies and purposeful capacity building among stakeholders. The future of G-IoT in construction and smart city research is in smart drones, building information modeling, digital twins, 3D printing, green computing, robotics and policies that incentivize adoption.

This study adds to the normative literature on envisioning potential strategies for adoption and the future of G-IoT in construction and smart cities as an overlooked dimension. No previous study to date has reviewed pertinent literature in this area, intending to investigate the current applications, adoption strategies and future direction of G-IoT in construction and smart cities. Researchers can expand on the current study by exploring the identified G-IoT applications and adoption strategies in detail, and practitioners can develop implementation policies, regulations and guidelines for holistic G-IoT adoption.

This study aims to explore how university language students evaluate different sustainability themes and examine the overall relevance of ecological, social, cultural and economic sustainability dimensions in language education.

A questionnaire was designed to study Finnish university language students’ (n = 55) order of priority for sustainability dimensions and their sub-themes and the justifications for the priority orders using a mixed methods design. Qualitative content analysis was conducted using NVivo software, and weighted rankings were used to analyse the quantitative data.

The findings of the study showed that language students evaluated the social and cultural dimensions as the most relevant in language teaching. In all dimensions, students approached sustainability mainly by prioritising larger issues and advancing towards smaller ones. Most non-directional responses appeared in the economic dimension. In addition, individual prioritising and justification approaches varied between different sustainability dimensions.

To the best of the authors’ knowledge, no previous studies have examined language students’ evaluations of and justifications for all four sustainability dimensions. The results highlight the need to use multiple, holistic approaches and systems thinking to incorporate education for sustainable development.

This paper aims to develop a new 3D analytical model in cylindrical coordinates to study radial flux eddy current couplers (RFECC) while considering the magnetic edge and 3D curvature effects, and the field reaction due to the induced currents.

The analytical model is developed by combining two formulations. A magnetic scalar potential formulation in the air and the magnets regions and a current density formulation in the conductive region. The magnetic field and eddy currents expressions are obtained by solving the 3D Maxwell equations in 3D cylindrical coordinates with the variable separation method. The torque expression is derived from the field solution using the Maxwell stress tensor. In addition to 3D magnetic edge effects, the proposed model takes into account the reaction field effect due to the induced currents in the conducting part. To show the accuracy of the developed 3D analytical model, its results are compared to those from the 3D finite element simulation.

The obtained results prove the accuracy of the new developed 3D analytical model. The comparison of the 3D analytical model with the 2D simulation proves the strong magnetic edge effects impact (in the axial direction) in these devices which must be considered in the modelling. The new analytical model allows the magnetic edge effects consideration without any correction factor and also presents a good compromise between precision and computation time.

The proposed 3D analytical model presents a considerably reduced computation time compared to 3D finite element simulation which makes it efficient as an accurate design and optimization tool for radial flux eddy current devices.

A new analytical model in 3D cylindrical coordinates has been developed to find the electromagnetic torque in radial flux eddy current couplers. This model considers the magnetic edge effects, the 3D curvature effects and the field reaction (without correction factors) while improving the computation time.

This study aims to increase the novelty of clothing design and fabric texture. The element library that can be used for design is systematically summarized. The element database can also be continuously filled according to the existing logic to realize the diversity of design. Improve the theory of fashion design, expand the designer's design ideas and improve design efficiency. Clear design steps and logic can help students and machines learn the design process and promote the development of intelligent design. And verify the feasibility of the simulation software to assist pleated clothing design.

Firstly, according to the logical framework of origami theory, different innovative designs and combined designs are made for the basic units of hyperbolic paraboloid, and the element library that can be used for design is systematically summarized. This database can also be continuously filled according to the existing logic to realize the diversity of design. Secondly, it summarizes three methods of pleated element filling clothing – uniform filling method, the irregular filling method and geometric addition method – that improve the theory of fashion design, expand the designer's design ideas and improve design efficiency. Clear design steps and logic can help students and machines learn the design process and promote the development of intelligent design. Finally, the virtual software is used to simulate the effect of pleated clothing, and the three-dimensional simulation software 3dclo is used to make an empirical study on the application of hyperbolic paraboloid origami in clothing pleated design to verify the feasibility of the simulation software to assist pleated clothing design.

The theoretical results of hyperbolic paraboloid origami are collected and arranged to establish the element library of hyperbolic paraboloid origami. The results expand the designer's design ideas and auxiliary design technology and improve the design efficiency using a sample of hyperbolic paraboloid fabric to verify its practicability and three-dimensional clothing simulation software for exploring the design. The design rules of hyperbolic paraboloid clothing and the realization method of fabric are summarized, including the expansion and combing of elements, the application of size and shape and the method of combination.

Owing to the hyperbolic paraboloid origami’s length shrinkage, the loose computation of clothing requires targeted computation. This paper solely applies a paper model for estimating the shrinkage, and then we tend to subsequently explore the way to precisely compute the porosity, to determine the existing differences in the two-dimensional shrinkage of hyperbolic paraboloid creases of varying materials and to know if the clothing after large-scale production is capable of reaching the anticipated value.

The exploration of this experiment brings a new 3D experiment process to the design process.

This experiment brings new possibilities for the development of virtual fitting and virtual display in the industry.

This study combines hyperbolic paraboloid origami and clothing and combs and expands the unit with logical thinking to expand the designer's design ideas.

The purpose of this study is to examine and identify the predominant themes in the literature on economic freedom. The paper also highlights the key journals, leading authors, top countries and organisations in the literature on economic freedom.

This paper uses the Scopus database to examine 1,512 articles covering the disciplines of economics, finance, business and social sciences from 1942 to 2022. Vosviewer software is used for creating bibliometric networks.

The findings suggest that significant growth in the economic freedom literature has occurred in the last ten years. Considerable attention has been devoted to examining the relationship between economic freedom and growth. The paper also finds that most of the research on economic freedom has been undertaken in the context of developed countries.

This study is one of the first attempts to undertake a bibliometric analysis of economic freedom. The article also highlights the less-researched areas in the literature and thus provides directions for future research.

The peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-09-2023-0690.

Jubail Industrial City is one of the largest industrial centers in the Middle East, offering potential opportunities for renewable energy generation. This research paper presents a comprehensive analysis of the wind resources in Jubail Industrial City and proposes the design of a smart grid-connected wind farm for this strategic location.

The study used wind data collected at three different heights above ground level – 10, 50 and 90 m – over four years from 2017 to 2020. Key parameters, such as average wind speeds (WS), predominant wind direction, Weibull shape, scale parameters and wind power density (WPD), were analyzed. The study used Windographer, an exclusive software program designed to evaluate wind resources.

The average WS at the respective heights were 3.07, 4.29 and 4.58 m/s. The predominant wind direction was from the north-west. The Weibull shape parameter (k) at the three heights was 1.77, 2.15 and 2.01, while the scale parameter (c) was 3.36, 4.88 and 5.33 m/s. The WPD values at different heights were 17.9, 48.8 and 59.3 W/m², respectively.

The findings suggest that Jubail Industrial City possesses favorable wind resources for wind energy generation. The proposed smart grid-connected wind farm design demonstrates the feasibility of harnessing wind power in the region, contributing to sustainable energy production and economic benefits.

This paper aims to conduct a systematic review of the literature on the quality of integrated reports (IR) and highlight the gaps in the existing research to provide directions and suggestions for future research.

This study was conducted through a systematic literature review using content analysis based on 40 papers from the Scopus, Web of Science and EBSCOhost databases on IR quality. While reading the full-text papers, the authors found six additional papers referenced by the literature being reviewed that were relevant to IR quality. Thus, there were 46 papers in the final review. The analysis begins with the definition and dimension of IR quality and theoretical lenses. Furthermore, this study outlines constructs or variables used in the previous literature.

The authors found that most studies used the quantitative method (41 papers or 89%). Five papers in the literature used qualitative methods (11%). Most researchers (34 papers or 72%) defined IR quality as consistent with the International Integrated Reporting Council framework, specifically the eight content elements. In particular, with the constructs that make up the quality of the IR, variations between researchers were found. Furthermore, there were some gaps that could be the directions for future research.

The literature that provides academic knowledge about IR quality is still limited, and research on IR is still growing. The literature review conducted by this study can provide an overview of the current research positions on the quality of IR and directions for future research in this area.

This study intends to show corporate executives a framework demonstrating the quality of corporate reporting. It can impact not only investors as a specific stakeholder group but also other stakeholder groups.

To the best of the authors’ knowledge, this study is the first literature review to examine the quality of IR, thus providing a map of current research to suggest directions for future research. Most of the previous literature reviews have been focused on integrated reporting (IR) in general and not quality.

This concluding chapter summarises the main themes and topics discussed in this book, synthesising the key issues facing contemporary anti-racism efforts. It reflects on a possible anti-racist future(s) in a context of greater sociocultural affiliations and more interconnected local and global environments. Ideas about race and ethnicity have adapted, and racial hierarchies, structures and processes continuously shape the way social groups engage, interact and live with difference. This raises questions regarding the enduring influence of race and racism. What will the state of multiracial societies be in the evolving digital economy that has transformed the structural and institutional environment affecting everyday life? What kind of an anti-racist future can be imagined that will contribute to ensuring greater social equity? This chapter ponders on a range of possibilities to chart directions towards an anti-racist future that fosters increased intercultural understanding for relational engagements across difference. It draws conclusions and lessons for an anti-racist future and lays out some directions for future research.