Search results
1 – 10 of over 208000Additive Manufacturing (AM) conventionally necessitates an intermediary slicing procedure using the standard tessellation language (STL) data, which can be computationally…
Abstract
Purpose
Additive Manufacturing (AM) conventionally necessitates an intermediary slicing procedure using the standard tessellation language (STL) data, which can be computationally burdensome, especially for intricate microcellular architectures. This study aims to propose a direct slicing method tailored for digital light processing-type AM processes for the efficient generation of slicing data for microcellular structures.
Design/methodology/approach
The authors proposed a direct slicing method designed for microcellular structures, encompassing micro-lattice and triply periodic minimal surface (TPMS) structures. The sliced data of these structures were represented mathematically and then convert into 2D monochromatic images, bypassing the time-consuming slicing procedures required by 3D STL data. The efficiency of the proposed method was validated through data preparations for lattice-based nasopharyngeal swabs and TPMS-based ellipsoid components. Furthermore, its adaptability was highlighted by incorporating 2D images of additional features, eliminating the requirement for complex 3D Boolean operations.
Findings
The direct slicing method offered significant benefits upon implementation for microcellular structures. For lattice-based nasopharyngeal swabs, it reduced data size by a factor of 1/300 and data preparation time by a factor of 1/8. Similarly, for TPMS-based ellipsoid components, it reduced data size by a factor of 1/60 and preparation time by a factor of 1/16.
Originality/value
The direct slicing method allows for bypasses the computational burdens associated with traditional indirect slicing from 3D STL data, by directly translating complex cellular structures into 2D sliced images. This method not only reduces data volume and processing time significantly but also demonstrates the versatility of sliced data preparation by integrating supplementary features using 2D operations.
Details
Keywords
Salleh Hassan and Theo Christopher
This study examines the incentives motivating listed companies in Malaysia to voluntarily choose the Direct Method over the Indirect Method in reporting cash flow from operating…
Abstract
This study examines the incentives motivating listed companies in Malaysia to voluntarily choose the Direct Method over the Indirect Method in reporting cash flow from operating (CFO) activities in their 1997 annual financial reports following the adoption of the IAS 7 (Revised) Statement of Cash Flows (SCF), which was used prior to the current standard MASB No. 5 Cash Flow Statement promulgated by the Malaysian Accounting Standards Board (MASB) in 1999. Adopting the signalling perspective, the general hypothesis of this study is that the choice of the Direct Method over the Indirect Method in reporting CFO activities is to maximize a firm’s value via engagement in quality signalling to the market. Specifically, it is hypothesised that such decision is influenced by the firm’s level of managerial efficiency, financial risk, size, its auditor, and industry membership. The sample consists of 231 firms listed on the Kuala Lumpur Stock Exchange; 32 firms in the treatment group (Direct Method) and 199 firms in the control group (Indirect Method). Based on the results from the univariate and multivariate analyses, we found all variables to be in the hypothesised directions. However, we infer that the decision to choose the Direct Method for reporting CFO activities in SCF is significantly influenced by the firm’s level of managerial efficiency, size, and its auditor. Thus, there is support for the general hypothesis of maximization of the value of the firm via quality signalling. The authors gratefully appreciate the helpful comments of the discussant and workshop participants at the 11th Asian‐Pacific Conference on International Accounting
Details
Keywords
Calin Gurau and Franck Duquesnois
The paper's objective is to investigate the relation between direct and indirect marketing channels applied by French wine producers, and to identify the elements that can enhance…
Abstract
Purpose
The paper's objective is to investigate the relation between direct and indirect marketing channels applied by French wine producers, and to identify the elements that can enhance the success of direct distribution methods.
Design/methodology/approach
Secondary data collected though a questionnaire survey, and published in a study of Viniflhor was analysed in order to identify the distribution channels used by French wine producers. In the second part of the study, primary qualitative data obtained through face‐to‐face interviews with 17 wine producers was used to explore their direct marketing approach.
Findings
The findings indicated that French wine producers use a large variety of both direct and indirect marketing channels, although the importance of these distribution methods varies with the size of the producer (defined in terms of vineyard area and wine production). An integrated distribution strategy is applied by more than a half of the respondents. Although the strategic planning process is applied informally and intuitively, a series of innovative elements are combined in order to enhance the value of the product offer and to develop long‐term relationships with satisfied customers.
Research limitations/implications
The low response rate obtained in the application of data collection methods raises questions regarding the possibility to generalize the findings to the entire population of study.
Originality/value
The paper applies a three layer analysis to the situation of the French wine producers from various regions, creatively combining focused investigation with an integrative perspective.
Details
Keywords
The magnitude of the informal economy has been estimated using either indirect measurement methods that employ proxy indicators or small‐scale household surveys. This paper seeks…
Abstract
Purpose
The magnitude of the informal economy has been estimated using either indirect measurement methods that employ proxy indicators or small‐scale household surveys. This paper seeks to provide an analysis of the findings of the first direct survey in an advanced market economy of national business opinion on its magnitude and impacts.
Design/methodology/approach
This paper analyses the findings of a UK survey of business opinion on the prevalence of the informal economy in their sector and its impacts on their businesses, namely the Small Business Service's (SBS) 2004/05 Small Business Survey of 7,505 small businesses.
Findings
The finding is that 14 per cent of UK small businesses view themselves as negatively affected by the informal economy, with businesses estimating on average that 8 per cent of trade in their sector is conducted on an off‐the‐books basis. The sectors most affected by the informal economy are land transport, construction, the motor vehicle trade, and hotels and restaurants, with fledgling enterprises and businesses in peripheral regions most affected.
Research limitations/implications
This survey records only business perceptions of the size of the informal economy in their sector rather than directly collecting data on the amount of informal work that businesses conduct.
Practical implications
This paper demonstrates that it is wholly feasible to conduct business surveys on the size and impacts of the informal economy and recommends modifications to the SBS survey method to improve data collection.
Originality/value
This paper reports the findings of the first survey in an advanced economy of national business opinion on the size and impacts of the informal economy.
Details
Keywords
Lie Yu, Jia Chen, Yukang Tian, Yunzhou Sun and Lei Ding
The purpose of this paper is to present a control strategy which uses two independent PID controllers to realize the hovering control for unmanned aerial systems (UASs). In…
Abstract
Purpose
The purpose of this paper is to present a control strategy which uses two independent PID controllers to realize the hovering control for unmanned aerial systems (UASs). In addition, the aim of using two PID controller is to achieve the position control and velocity control simultaneously.
Design/methodology/approach
The dynamic of the UASs is mathematically modeled. One PID controller is used for position tracking control, while the other is selected for the vertical component of velocity tracking control. Meanwhile, fuzzy logic algorithm is presented to use the actual horizontal component of velocity to compute the desired position.
Findings
Based on this fuzzy logic algorithm, the control error of the horizontal component of velocity tracking control is narrowed gradually to be zero. The results show that the fuzzy logic algorithm can make the UASs hover still in the air and vertical to the ground.
Social implications
The acquired results are based on simulation not experiment.
Originality/value
This is the first study to use two independent PID controllers to realize stable hovering control for UAS. It is also the first to use the velocity of the UAS to calculate the desired position.
Details
Keywords
Siddharth Suhas Kulkarni, Craig Chapman, Hanifa Shah and David John Edwards
The purpose of this paper is to conduct a comparative analysis between a straight blade (SB) and a curved caudal-fin tidal turbine blade (CB) and to examine the aspects relating…
Abstract
Purpose
The purpose of this paper is to conduct a comparative analysis between a straight blade (SB) and a curved caudal-fin tidal turbine blade (CB) and to examine the aspects relating to geometry, turbulence modelling, non-dimensional forces lift and power coefficients.
Design/methodology/approach
The comparison utilises results obtained from a default horizontal axis tidal turbine with turbine models available from the literature. A computational design method was then developed and implemented for “horizontal axis tidal turbine blade”. Computational fluid dynamics (CFD) results for the blade design are presented in terms of lift coefficient distribution at mid-height blades, power coefficients and blade surface pressure distributions. Moving the CB back towards the SB ensures that the total blade height stays constant for all geometries. A 3D mesh independency study of a “straight blade horizontal axis tidal turbine blade” modelled using CFD was carried out. The grid convergence study was produced by employing two turbulence models, the standard k-ε model and shear stress transport (SST) in ANSYS CFX. Three parameters were investigated: mesh resolution, turbulence model, and power coefficient in the initial CFD, analysis.
Findings
It was found that the mesh resolution and the turbulence model affect the power coefficient results. The power coefficients obtained from the standard k-ε model are 15 to 20 per cent lower than the accuracy of the SST model. Further analysis was performed on both the designed blades using ANSYS CFX and SST turbulence model. The variation in pressure distributions yields to the varying lift coefficient distribution across blade spans. The lift coefficient reached its peak between 0.75 and 0.8 of the blade span where the total lift accelerates with increasing pressure before drastically dropping down at 0.9 onwards due to the escalating rotational velocity of the blades.
Originality/value
The work presents a computational design methodological approach that is entirely original. While this numerical method has proven to be accurate and robust for many traditional tidal turbines, it has now been verified further for CB tidal turbines.
Details
Keywords
The purpose of this paper is to present novel robust fault tolerant control design architecture to detect and isolate spacecraft attitude control actuators and reconfigure to…
Abstract
Purpose
The purpose of this paper is to present novel robust fault tolerant control design architecture to detect and isolate spacecraft attitude control actuators and reconfigure to redundant backups to improve the practicality of actuator fault detection.
Design/methodology/approach
The Robust Fault Tolerant Control is designed for spacecraft Autonomous Rendezvous and Docking (AR&D) using Lyapunov direct approach applied to non‐linear model. An extended Kalman observer is used to accurately estimate the state of the attitude control actuators. Actuators on all three axes (roll/pitch/yaw) sequentially fail one after another and the robust fault tolerant controller acts to reconfigure to redundant backups to stabilize the spacecrafts and complete the required maneuver.
Findings
In the simulations, the roll, pitch and yaw dynamics of the spacecraft are considered and the attitude control actuators failures are detected and isolated. Furthermore, by switching to redundant backups, the guarantee of overall stability performance is demonstrated.
Research limitations/implications
A real time actuator failure detection and reconfiguration process using robust fault tolerant control is applied for spacecraft AR&D maneuvers. Finding an appropriate Lyapunov function for the non‐linear dynamics is not easy and always challenging. Failure of actuators on all three axes at the same time is not considered. It is a very useful approach to solve self‐assembly problems in space, spacecraft proximity maneuvers as well as co‐operative control of planetary vehicles in presence of actuator failures.
Originality/value
An approach has been proposed to detect, isolate and reconfigure spacecraft actuator failures occurred in the spacecraft attitude control system. A Robust Fault Tolerant Control scheme has been developed for the nonlinear AR&D maneuver for two spacecrafts. Failures that affect the control performance characteristics are considered and overall performance is guaranteed even in presence of control actuator failures. The architecture is demonstrated through model‐based simulation.
Details
Keywords
Mohammad Reza Pakatchian, Hossein Saeidi and Alireza Ziamolki
This study aims at enhancing the performance of a 16-stage axial compressor and improving the operating stability. The adopted approaches for upgrading the compressor are…
Abstract
Purpose
This study aims at enhancing the performance of a 16-stage axial compressor and improving the operating stability. The adopted approaches for upgrading the compressor are artificial neural network, optimization algorithms and computational fluid dynamics.
Design/methodology/approach
The process starts with developing several data sets for certain 2D sections by means of training several artificial neural networks (ANNs) as surrogate models. Afterward, the trained ANNs are applied to the 3D shape optimization along with parametrization of the blade stacking line. Specifying the significant design parameters, a wide range of geometrical variations are considered by implementation of appropriate number of design variables. The optimized shapes are analyzed by applying computational fluid dynamic to obtain the best geometry.
Findings
3D optimal results show improvements, especially in the case of decreasing or elimination of near walls corner separations. In addition, in comparison with the base geometry, numerical optimization shows an increase of 1.15 per cent in total isentropic efficiency in the first four stages, which results in 0.6 per cent improvement for the whole compressor, even while keeping the rest of the stages unchanged. To evaluate the numerical results, experimental data are compared with obtained data from simulation. Based on the results, the highest absolute relative deviation between experimental and numerical static pressure is approximately 7.5 per cent.
Originality/value
The blades geometry of an axial compressor used in a heavy-duty gas turbine is optimized by applying artificial neural network, and the results are compared with the base geometry numerically and experimentally.
Details
Keywords
Farman Afzal, Shao Yunfei, Mubasher Nazir and Saad Mahmood Bhatti
In the past decades, artificial intelligence (AI)-based hybrid methods have been increasingly applied in construction risk management practices. The purpose of this paper is to…
Abstract
Purpose
In the past decades, artificial intelligence (AI)-based hybrid methods have been increasingly applied in construction risk management practices. The purpose of this paper is to review and compile the current AI methods used for cost-risk assessment in the construction management domain in order to capture complexity and risk interdependencies under high uncertainty.
Design/methodology/approach
This paper makes a content analysis, based on a comprehensive literature review of articles published in high-quality journals from the years 2008 to 2018. Fuzzy hybrid methods, such as fuzzy-analytical network processing, fuzzy-artificial neural network and fuzzy-simulation, have been widely used and dominated in the literature due to their ability to measure the complexity and uncertainty of the system.
Findings
The findings of this review article suggest that due to the limitation of subjective risk data and complex computation, the applications of these AI methods are limited in order to address cost overrun issues under high uncertainty. It is suggested that a hybrid approach of fuzzy logic and extended form of Bayesian belief network (BBN) can be applied in cost-risk assessment to better capture complexity-risk interdependencies under uncertainty.
Research limitations/implications
This study only focuses on the subjective risk assessment methods applied in construction management to overcome cost overrun problem. Therefore, future research can be extended to interpret the input data required to deal with uncertainties, rather than relying solely on subjective judgments in risk assessment analysis.
Practical implications
These results may assist in the management of cost overrun while addressing complexity and uncertainty to avoid chaos in a project. In addition, project managers, experts and practitioners should address the interrelationship between key complexity and risk factors in order to plan risk impact on project cost. The proposed hybrid method of fuzzy logic and BBN can better support the management implications in recent construction risk management practice.
Originality/value
This study addresses the applications of AI-based methods in complex construction projects. A proposed hybrid approach could better address the complexity-risk interdependencies which increase cost uncertainty in project.
Details
Keywords
Andrew Adams, Stephen Morrow and Ian Thomson
To provide insights into the role of formal and informal accounts in preventing the liquidation of a professional football club and in post-crisis rebuilding.
Abstract
Purpose
To provide insights into the role of formal and informal accounts in preventing the liquidation of a professional football club and in post-crisis rebuilding.
Design/methodology/approach
This case study, framed as a conflict arena, covers an eight-year period of a high-profile struggle over the future of a professional football club. It uses a mixed methods design, including direct engagement with key actors involved in administration proceedings and transformation to a hybrid supporter-owned organisation.
Findings
Our findings suggest that within the arena:• formal accounting and governance were of limited use in managing the complex network of relationships and preventing the abuse of power or existential crises. • informal accounting helped mobilise critical resources and maintain supporters’ emotional investment during periods of conflict. • informal accounts enabled both resistance and coalition-building in response to perceived abuse of power. • informal accounts were used by the Club as part of its legitimation activities.
Originality/value
This study provides theoretical and empirical insights into an unfolding crisis with evidence gathered directly from actors involved in the process. The conceptual framework developed in this paper creates new visibilities and possibilities for developing more effective accounting practices in settings that enable continuing emotional investment from supporters.
Details