Search results

The effect of humidity, temperature and temperature ramping rate on the dimensional changes of the photo‐cured stereolithography (SL) resin SL5195 was investigated. It was found that moisture absorption by the SL resin is a very slow process at ambient temperatures. Varying relative humidity (RH) between 20 and 90 per cent in the environment only produced slight changes in the sample dimensions during the time period investigated. Increasing the environment temperature caused a significant increase in the sample dimensions through thermal expansion along with accelerated moisture absorption at 50 per cent or higher RH. Increasing the temperature ramping rate reduces the moisture absorption during the thermal cycles.

This paper aims to study the dimensional characteristics such as fabric density variations, dimensional constant parameters, linear and area dimensional changes and spirality angle variations of 1 × 1 rib knitted structures made from cotton‐spandex core spun yarns, under laundering regimes till 10th washing cycle.

Samples of the above fabrics underwent dry, wet and full relaxation treatments and were subjected to standard atmospheric conditions prior to take the measurements. Washing was done in a front loading machine under normal agitation with machine 56 RPM. Each washing regime includes wash, rinse, spin, tumble dry steps. Washing temperature was set at 40°C and water intake for washing was 30 l and rinsed with cold water. 0.1 g/l standard wetting agent was used. The mass of the load was maintained constant to 3 kg to keep the material ratio as 1:10. Washing regimes were continued till 10th cycle.

Cotton‐spandex rib structures came to a more stable state (minimum energy state) after 10th laundering cycle under the experimental conditions. Cotton did not come to such a state, even after 10th cycle proceeded. ANOVA analysis done under 95 percent confidential level has shown that fabric tightness and relaxation procedures give significant effect on dimensional characteristics of cotton‐spandex and cotton rib structures. However, area shrinkage variations of cotton rib fabrics have shown an exception to this.

According to the dimensional constant values, evenafter 10th washing cycle, cotton rib structures did not come to a stable position. This should be further investigated to achieve a better stable rib knitted structure.

The number of washing cycles can be increased or tumble dry duration can be increased to 120 min. to get a more stable state of cotton rib structures.

The results are important for the knitting industry to predict the dimensional behavior of designed knitted fabric under relaxation. These data can be used to set the circular machine parameters to achieve a more stable fabric after laundering.

Cellulosic fabric and plain weave are the most commonly used material in home textiles. The poor wrinkling, dimensional stability and pilling are some of the problems faced during usage. The textile industries apply resin finish to improve these characteristics. The purpose of this study is to improve pilling resistance, dimensional stability and smoothness appearance (SA) of rayon and rayon/cotton plain fabrics using different concentrations of dimethyloldihydroxyethylene urea (DMDHEU) and acrylic copolymer. The finish was fixed using two different fixation methods.

Three concentrations, 40, 100 and 150 g/l of Arkofix NF (DMDHE based) and Appretan N9211 (acrylic copolymer), were taken. The finish was applied at normal and shock cure. The effects of finish on pilling resistance, dimensional stability, smoothness, tear strength, light fastness, Berger whiteness and yellowness index of plain fabrics were investigated.

The changes in the characteristics of the finished fabrics were compared with unfinished fabrics. This study revealed that at 40 g/l of Arkofix NF and Appretan N9211 using a normal cure would improve the pilling resistance, dimensional stability and SA of the plain fabrics. Whereas, there was no adverse effect observed on tear strength, light fastness, Berger whiteness and yellowness index of plain fabrics at these conditions.

Unlike the previous studies, this paper proposed the single finish formulation where the functional characteristics of the plain rayon and rayon cotton fabrics meet the general requirement of a customer.

Dyadic multi-dimensionality informs the variation that exists within and between network ties and suggests that ties are not all the same and not all equally strategic. This chapter presents a model of dyadic evolution grounded in dyadic multi-dimensionality and framed within actor-level, dyadic-level, endogenous, and exogenous contexts. These contexts generate both strategic catalysts that motivate network action and bounded agency that may constrain such network action. Assuming the need to navigate within bounded agency, the model highlights three strategic processes that demonstrate how dyadic multi-dimensionality underlies the evolution of strategic network ties.

Techniques of extrude and cure additive manufacturing for thermally cured, high viscosity and medical-grade silicone are investigated by using a small ram extruder and a near-infrared (IR) laser. The purpose of this study is to evaluate the process parameter effects on the stiffness of the final products.

Process parameter effects on axial stiffness values and durometer are explored. Parameters such as extrusion layer height, laser speed, laser current, laser raster spacing and multiple laser passes were investigated and compared to traditional cast and cure methods. Dimensional changes were also recorded and compared.

Tensile and durometer tests show that certain curing parameters give tensile stress and durometers within 10 per cent of bulk material specifications at 200 per cent strain. Parameters that had the highest impact on tensile stress at 200 per cent strain were layer height (0.73 per cent) followed by laser power (0.69 per cent), and then laser raster spacing (0.45 per cent). Parameters that had the highest impact on durometer were laser power (1.00 per cent), followed by layer height, (0.34 per cent) and then laser raster speed (0.32 per cent). Three-dimensional printed samples had about 11.2 per cent more shrinkage than the bulk cast samples in the longest dimension.

This paper is one of the first that demonstrates near IR laser curing parameter effects on three-dimensional printed, commercial off-the-shelf, medical-grade and viscous silicone. The ability to cure very viscous thermosets locally enables interesting technologies such as wire encapsulation, high voltage actuators and drug delivery devices.

In the field of knitwear, dimensional stability is assumed as a critical problem that affects the quality and salability of a product. Although much work has been done in this area with a focus on the factors affecting fabric shrinkage, however, there is a lack of work on knitwears with respect to their dimensional stability. The purpose of this paper is to investigate the impact of stitching parameters and wash types on the dimensional properties of knitwear.

The crew-neck t-shirts were prepared by using pique knitted fabrics. Different sewing and finishing parameters were used that include stitch density, stitch type, stitching thread and wash type. The critical measurements of the selected garment are taken as output variables which are body width, sleeve length, body length and across shoulder. After laundering process, shrinkage percentage was calculated by using before-wash and after-wash measurements.

This study shows that the stitching parameters affect significantly on knitwear’s shrinkage. Thus, when patterns are being developed for the cutting of fabric, expected shrinkage, known as residual shrinkage, must be considered to avoid unexpected changes in garment shape.

This research will be useful for knitwear manufacturing industry.

The length and width shrinkages, skewness, spirality and moisture content of three weft knitted cotton structures, plain single jersey, interlock and lacoste, were determined at regular intervals during tumble drying. Significant length and width shrinkages occurred in all three structures with the amount of shrinkage increasing rapidly in plain single jersey and lacoste as their moisture contents fell below 30 per cent. Distortion was less affected by tumble drying. An attempt was made to isolate the effects of heat and agitation during tumble drying. It has been demonstrated that similar patterns of shrinkage and distortion occur whether heat is applied during tumble drying or not. The tumbling action in a tumble drier has the greatest influence on the dimensional stability and distortion of weft knitted cotton fabrics.

The purpose of this paper is to propose a size-changing method with three-dimensional (3D) garment modeling for various body sizes considering vertical body proportions in addition to horizontal dimensions, while preserving the silhouette and ease of the original garment.

Cross-sectional dimensions and shapes of one dress form (the standard body) and jacket bodice were obtained by 3D scanning. The authors calculated horizontal multiplication factors of the relationship between the standard body and jacket bodice, and vertical body proportions. A target dress form was deformed using multiplication factors and vertical body proportions to construct a garment model that fitted the dress form. The method was verified using three different dress forms. The bodices of the jackets were compared with those obtained without adjusting vertical proportions.

Employing the proposed method, jacket bodices were made and fitted on target bodies while preserving the original shape. Jackets bodices made without considering vertical proportions had many wrinkles and deformed shape and poor fit around the bust line owing to the different vertical proportions. The vertical proportion is thus an important factor in the 3D garment modeling of garments of different size fitted on a body.

The proposed method is a new size-changing or grading method for a bodice that preserves the original silhouette.

The proposed modeling method allows the construction of jacket bodice models and jackets of different size considering vertical body proportions. The method is applicable when making individually tailored garments or ready-to-wear garments for different targets.

Technical means now exist to monitor, predict a danger and issue early warnings when something devastating is estimated to happen in the human environment. In order to adapt such means for the benefit of humanity, existing monitoring methods, basic system design principles and natural short and long environmental transformations were investigated. Finally an integrated automatic system for deformation monitoring and surveying of the Chernobyl disaster area, was proposed. The conclusion was that airborne remote sensing including GPS and photogrammetry can be considered the optimum solution.

This study investigated changes in appearance due to variations in the amount of ease allowance at the bust, waist and hips with ready-made women's shirts in two different styles. The authors also examined the suitable range for ease allowance with those two styles using a sensory test for evaluating appearance.

The authors employed two women's shirts (samples I and II) in different styles (fit and straight). The authors modified the size of the bust, waist and hips with a changeable-size dress form using 1-cm intervals. The authors observed the shape changes. With the pictures at 2-cm intervals, the authors conducted a sensory test to evaluate appearance. 20 Japanese university students in their 20s made their assessments using seven items (wrinkles, fit, silhouette, beauty, fashionable impression, comfort and purchase intention) with a five-point scale. The proportion of subjects who scored 1 or more was 40% or greater when using ease allowance in the suitable range.

The appropriate ranges of ease allowance differed according to the style and evaluation items. Regarding appearance and purchase intention with sample I from the front, the suitable range of ease allowance was 1–7 cm for the bust, 2–6 cm for the hips and 13 cm for the waist. From the side, the range was 0–6 cm for the hips and 7 cm for the bust. With sample II from the front, the suitable range of ease allowance was about 4 cm for all parts. From the side, the range was 11 cm for the bust and 4 cm for the hips.

Using a dress form, the authors determined suitable ranges of ease allowance for two women's shirts in fit and straight styles with seven bust, six waist and six hip sizes. The authors found that the suitable range of ease allowance varied according to the style, direction and parts of the shirt. Our results can act as a guideline for designing and selecting ease allowance for women's shirts, taking into account comfort from appearance, purchase intention and beauty.