Search results

This study aims at improving combustion process to reduce emissions. Emissions such as carbon monoxide, particulate matter and unburnt hydrocarbons are a result of incomplete combustion. These emissions have useful energy but cannot be reclaimed. Hence, to enhance combustion, effect of biofuel blending on diesel combustion was investigated.

Essential oils have been found easier for blending with diesel because of simple molecular structure compared to vegetable oils. Lavender oil is an essential oil which has not yet been studied by blending with diesel. The major constituents of lavender oil are linalyl acetate (cetane number improver) and linalool (nitrogen oxides reduction). A single-cylinder, four-stroke diesel engine was run by blending diesel with lavender oil (Lavandula angustifolia oil [LAO]) in varying proportions, 5%, 10% and 15% by volume.

Higher heat release rate (HRR) was observed using lavender oil blends compared to pure diesel. Compared to diesel, an increase in brake-specific fuel consumption using blends was observed. LAO15 has the lowest CO emissions at all loading conditions, 29.3% less at 100% load compared to diesel. LAO5 and LAO15 have 6.9% less HC emissions at 100% load condition compared to diesel. LAO15 has only 1.3% higher NO_x emissions compared to diesel at 100% load condition. LAO5 has the lowest smoke content at all loading conditions.

Lavender oil was used directly without any processing. Tested on single-cylinder engine.

To the best of the author’s knowledge, currently, there is no published work on lavender oil–diesel combination. Lavender oil can provide a simple renewable solution for diesel additives with potential up to 15% blending.

The study aims to verify and establish the result of the most suitable optimization approach for higher performance and lower emission of a variable compression ratio (VCR) diesel engine. In this study, three types of test fuels are taken and tested in a variable compression ratio diesel engine (compression ignition). The fuels used are conventional diesel fuel, e-diesel (85% diesel-15% bioethanol) and nano-fuel (85% diesel-15% bioethanol-25 ppm Al₂O₃). The effect of bioethanol and nano-particles on performance, emission and cost-effectiveness is investigated at different load and compression ratios (CRs). The optimum performance and lower emission of the engine are evaluated and compared with other optimization methods.

The test engine is run by diesel, e-diesel (85% diesel-15% bioethanol) and nano-fuel (85% diesel-15% bioethanol-25 ppm Al₂O₃) in three different loadings (4 kg, 8 kg and 12 kg) and CR of 14, 16 and 18, respectively. The optimum value of energy efficiency, exergy efficiency, NO_X emission and relative cost variation are determined against the input parameters using Taguchi-Grey method and confirmed by response surface methodology (RSM) technique.

Using Taguchi-Grey method, the maximum energy and exergy efficiency, minimum % relative cost variation and NO_X emission are 24.64%, 59.52%, 0 and 184 ppm, respectively, at 4 kg load, 18 CR and fuel type of nano-fuel. Using RSM technique, maximum energy and exergy efficiency are 24.8% and 62.9%, and minimum NO_X emission and % cost variation are 208.4 ppm and –6.5, respectively, at 5.2 kg load, 18 CR and nano-fuel. The RSM is suggested as the most appropriate technique for obtaining maximum energy and exergy efficiency, and minimum % relative cost; however, for lowest possible NO_X emission, the Taguchi-Grey method is the most appropriate.

Waste rice straw is used to produce bioethanol. 4-E analysis, i.e. energy, exergy, emission and economic analysis, has been carried out, optimized and compared.

The study aims to determine the the optimal value of output parameters of a variable compression ratio (CR) diesel engine are investigated at different loads, CR and fuel modes of operation experimentally. The output parameters of a variable compression ratio (CR) diesel engine are investigated at different loads, CR and fuel modes of operation experimentally. The performance parameters like brake thermal efficiency (BTE) and brake specific energy consumption (BSEC), whereas CO emission, HC emission, CO₂ emission, NO_x emission, exhaust gas temperature (EGT) and opacity are the emission parameters measured during the test. Tests are conducted for 2, 6 and 10 kg of load, 16.5 and 17.5 of CR.

In this investigation, the first engine was fueled with 100% diesel and 100% Calophyllum inophyllum oil in single-fuel mode. Then Calophyllum inophyllum oil with producer gas was fed to the engine. Calophyllum inophyllum oil offers lower BTE, CO and HC emissions, opacity and higher EGT, BSEC, CO₂ emission and NO_x emissions compared to diesel fuel in both fuel modes of operation observed. The performance optimization using the Taguchi approach is carried out to determine the optimal input parameters for maximum performance and minimum emissions for the test engine. The optimized value of the input parameters is then fed into the prediction techniques, such as the artificial neural network (ANN).

From multiple response optimization, the minimum emissions of 0.58% of CO, 42% of HC, 191 ppm NO_x and maximum BTE of 21.56% for 16.5 CR, 10 kg load and dual fuel mode of operation are determined. Based on generated errors, the ANN is also ranked for precision. The proposed ANN model provides better prediction with minimum experimental data sets. The values of the R² correlation coefficient are 1, 0.95552, 0.94367 and 0.97789 for training, validation, testing and all, respectively. The said biodiesel may be used as a substitute for conventional diesel fuel.

The blend of Calophyllum inophyllum oil-producer gas is used to run the diesel engine. Performance and emission analysis has been carried out, compared, optimized and validated.

The demand for energy is increasing massively due to urbanization and industrialization. Due to the massive usage of diesel engines in the transportation sector, global warming is increasing rapidly. The purpose of this paper is to use hydrogen as the potential alternative for diesel engine.

A series of tests conducted in the twin cylinder four stroke diesel engine at various engine speeds. In addition to the hydrogen, the ultrasonication is applied to add the nanoparticles to the neat diesel. The role of nanoparticles on engine performance is effective owing to its physicochemical properties. Here, neat diesel mixed 30% of biodiesel along with the hydrogen at the concentration of 10%, 20% and 30% and 50 ppm of graphite oxide to form the blends DNH10, DNH20 and DNH30.

Inclusion of both hydrogen and nanoparticles increases the brake power and brake thermal efficiency (BTE) of the engine with relatively less fuel consumption. Compared to all blends, the maximum BTE of 33.3% has been reported by 30% hydrogen-based fuel. On the contrary, the production of the pollutants also reduces as the hydrogen concentration increases.

Majority of the pollutants such as carbon monoxide, carbon dioxide and hydrocarbon were dropped massively compared to diesel. On the contrary, there is no reduction in nitrogen of oxides (NOx). Highest production of NOx was witnessed for 30% hydrogen fuel due to the premixed combustion phase and cylinder temperatures.

Diesel has traditionally been considered the best-suited and most widely used fuel in various sectors, including manufacturing industries, power production, automobiles and transportation. However, with the ongoing crisis of fossil fuel inadequacy, the search for alternative fuels and their application in these sectors has become increasingly important. One particularly interesting and beneficial alternative fuel is biodiesel derived from bio sources.

In this research, an attempt was made to use biodiesel in an unconventional micro gas turbine engine. It will remove the concentric use of diesel engines for power production by improving fuel efficiency as well as increasing the power production rate. Before the fuel is used enormously, it has to be checked in many ways such as performance, emission and combustion analysis experimentally.

In this paper, a detailed experimental study was made for the use of Spirulina microalgae biodiesel in a micro gas turbine. A small-scale setup with the primary micro gas turbine and secondary instruments such as a data acquisition system and AVL gas analyser. The reason for selecting the third-generation microalgae is due to its high lipid and biodiesel production rate. For the conduction of experimental tests, certain conditions were followed in addition that the engine rotating rpm was varied from 4,000, 5,000 and 6,000 rpm. The favourable and predicted results were obtained with the use of microalgae biodiesel.

The performance and combustion results were not exactly equal or greater for biodiesel blends but close to the values of pure diesel; however, the reduction in the emission of CO was at the appreciable level for the used spirulina microalgae biodiesel. The emission of nitrogen oxides and carbon dioxide was a little higher than the use of pure diesel. This experimental analysis results proved that the use of spirulina microalgae biodiesel is both economical and effective replacement for fossil fuel.

This paper aims to examine the cross-quantile correlation and causality-in-quantiles between green investments and energy commodities during the outbreak of COVID-19. To be specific, the authors aim to address the following questions: Is there any distributional predictability among green bonds and energy commodities during COVID-19? Is there exist any directional predictability between green investments and energy commodities during the global pandemic? Can green bonds hedge the risk of energy commodities during a period of the financial crisis.

The authors use the nonparametric causality in quantile and cross-quantilogram (CQ) correlation approaches as the estimation techniques to investigate the distributional and directional predictability between green investments and energy commodities respectively using daily spot prices from January 1, 2020, to March 26, 2021. The study uses daily closing price indices S&P Green Bond Index as a representative of the green bond market. In the case of energy commodities, the authors use S&P GSCI Natural Gas Spot, S&P GSCI Biofuel Spot, S&P GSCI Unleaded Gasoline Spot, S&P GSCI Gas Oil Spot, S&P GSCI Brent Crude Spot, S&P GSCI WTI, OPEC Oil Basket Price, Crude Oil Oman, Crude Oil Dubai Cash, S&P GSCI Heating Oil Spot, S&P Global Clean Energy, US Gulf Coast Kerosene and Los Angeles Low Sulfur CARB Diesel Spot.

From the CQ correlation results, there exists an overall negative directional predictability between green bonds and natural gas. The authors find that the directional predictability between green bonds and S&P GSCI Biofuel Spot, S&P GSCI Gas Oil Spot, S&P GSCI Brent Crude Spot, S&P GSCI WTI Spot, OPEC Oil Basket Spot, Crude Oil Oman Spot, Crude Oil Dubai Cash Spot, S&P GSCI Heating Oil Spot, US Gulf Coast Kerosene-Type Jet Fuel Spot Price and Los Angeles Low Sulfur CARB Diesel Spot Price is negative during normal market conditions and positive during extreme market conditions. Results from the non-parametric causality in the quantile approach show strong evidence of asymmetry in causality across quantiles and strong variations across markets.

The quantile time-varying dependence and predictability results documented in this paper can help market participants with different investment targets and horizons adopt better hedging strategies and portfolio diversification to aid optimal policy measures during volatile market conditions.

The outcome of this study will promote awareness regarding the environment and also increase investor’s participation in the green bond market. Further, it allows corporate institutions to fulfill their social commitment through the issuance of green bonds.

This paper differs from these previous studies in several aspects. First, the authors have included a wide range of energy commodities, comprising three green bond indices and 14 energy commodity indices. Second, the authors have explored the dependency between the two markets, particularly during COVID-19 pandemic. Third, the authors have applied CQ and causality-in-quantile methods on the given data set. Since the market of green and sustainable finance is growing drastically and the world is transmitting toward environment-friendly practices, it is essential and vital to understand the impact of green bonds on other financial markets. In this regard, the study contributes to the literature by documenting an in-depth connectedness between green bonds and crude oil, natural gas, petrol, kerosene, diesel, crude, heating oil, biofuels and other energy commodities.

This study aims to explore the possibility of using magnetic biochar composite (MBCC) derived from Heglig tree bark (HTB) powder (agricultural solid waste) and cobalt ferrite (CoFe₂O₄, CFO) for oil spill removal from seawater surface.

One-pot co-precipitation route was used to synthesize MBCC. The prepared materials were characterized by X-ray diffraction, scanning electron microscopy-energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy. The densities of the prepared materials were also estimated. Crude, diesel engine and gasoline engine oils were used as seawater pollutant models. The gravimetric oil removal (GOR) method was used for removing oil spills from seawater using MBCC as a sorbent material.

The obtained results revealed that the prepared materials (CFO and MBCC) were able to remove the crude oil and its derivatives from the seawater surface. Besides, when the absorbent amount was 0.01 g, the highest GOR values for crude oil (31.96 ± 1.02 g/g) and diesel engine oil (14.83 ± 0.83 g/g) were obtained using MBCC as an absorbent. For gasoline engine oil, the highest GOR (27.84 ± 0.46 g/g) was attained when CFO was used as an absorbent.

Oil spill removal using MBCC derived from cobalt ferrite and HTB. Using tree bark as biomass (eco-friendly, readily available and low-cost) for magnetic biochar preparation also is a promising method for minimizing agricultural solid wastes (e.g. HTB) and obtaining value-added-products.

This study aims to investigate the feasibility of proposed microgrid (MG) that comprises photovoltaic, wind turbines, battery energy storage and diesel generator to supply a residential building in Grindelwald which is chosen as the test location.

Three operational configurations were used to run the proposed MG. In the first configuration, the electric energy can be vended and procured utterly between the main-grid and MG. In the second configuration, the energy trade was performed within 15 kWh as the maximum allowable limit of energy to purchase and sell. In the third configuration, the system performance in the stand-alone operation mode was investigated. A whale optimization technique is used to determine the optimal size of MG in all proposed configurations. The cost of energy (COE) and other measures are used to evaluate the system performance.

The obtained results revealed that the first configuration is the most beneficial with COE of 0.253$/KWh and reliable 100%. Furthermore, the whale optimization algorithm is sufficiently feasible as compared to other techniques to apply in the applications of MG.

The value of the proposed research is to investigate to what extend the integration between MG and main-grid is beneficial economically and technically. As opposed to previous research studies that have focused predominantly only on the optimal size of MG.

Waiting for a bus may represent a period of intense exposure to traffic particles in hot and noisy conditions in the street. To lessen the particle load and tackle heat in bus stops a shelter was equipped with an electrostatic precipitator and a three-step adiabatic cooling system capable of dynamically adjust its operation according to actual conditions. This study evaluates the effectiveness of the Airbitat Oasis Smart Bus Stop, as the shelter was called, to provide clean and cool air.

The particle exposure experienced in this innovative shelter was contrasted with that in a conventional shelter located right next to it. Mass concentrations of fine particles and black carbon, and particle number concentration (as a proxy of ultrafine particles) were simultaneously measured in both shelters. Air temperature, relative humidity and noise level were also measured.

The new shelter did not perform as expected. It only slightly reduced the abundance of fine particles (−6.5%), but not of ultrafine particles and black carbon. Similarly, it reduced air temperature (−1 °C), but increased relative humidity (3%). Its operation did not generate additional noise.

The shelter's poor performance was presumably due to design flaws induced by a lack of knowledge on traffic particles and fluid dynamics in urban environments. This is an example where harnessing technology without understanding the problem to solve does not work.

It is uncommon to come across case studies like this one in which the performance and effectiveness of urban infrastructure can be assessed under real-life service settings.

Prefabricated buildings (PBs) have proven to effectively mitigate carbon emissions in the construction industry. Existing studies have analyzed the environmental performance of PBs considering the shift in construction methods, ignoring the emissions abatement effects of the low-carbon practices adopted by participants in the prefabricated building supply chain (PBSC). Thus, it is challenging to exploit the environmental advantages of PBs. To further reveal the carbon reduction potential of PBs and assist participants in making low-carbon practice strategy decisions, this paper constructs a system dynamics (SD) model to explore the performance of PBSC in low-carbon practices.

This study adopts the SD approach to integrate the complex dynamic relationship between variables and explicitly considers the environmental and economic impacts of PBSC to explore the carbon emission reduction effects of low-carbon practices by enterprises under environmental policies from the supply chain perspective.

Results show that with the advance of prefabrication level, the carbon emissions from production and transportation processes increase, and the total carbon emissions of PBSC show an upward trend. Low-carbon practices of rational transportation route planning and carbon-reduction energy investment can effectively reduce carbon emissions with negative economic impacts on transportation enterprises. The application of sustainable materials in low-carbon practices is both economically and environmentally friendly. In addition, carbon tax does not always promote the implementation of low-carbon practices, and the improvement of enterprises' environmental awareness can further strengthen the effect of low-carbon practices.

This study dynamically assesses the carbon reduction effects of low-carbon practices in PBSC, informing the low-carbon decision-making of participants in building construction projects and guiding the government to formulate environmental policies.