Search results

This study aims to determine the effects of lodging infrastructure development (LID) on Cordillera Administrative Region’s (CAR) environmental quality and natural resource management and its implication to globally responsible leadership. Specifically, this study sought to determine the contribution of LID to environmental deterioration and natural resource degradation in the CAR. As a result, a mathematical model is developed, which supports sustainability practices to maintain the environmental quality and natural resource management in CAR, Philippines.

This study used a descriptive research design using a mixed-methods approach. Self-structured interview and survey were used to gather the data. The population of this study involved three groups. There were 6.28% (34) experts in the field for the qualitative data, 70.24% (380) respondents for the quantitative data and 23.47% (127) from the lodging establishments. 120 respondents from the Department of Tourism – CAR (DOT-CAR) accredited hotels. Nonparametric and nonlinear regression analysis was used to process the data.

The effects of LID on the environmental quality and natural resource management in CAR as measured through carbon emission from liquefied petroleum gas (LPG), electricity and water consumption in the occupied guest rooms revealed a direct correlation between the LID. Findings conclude that the increase in tourist arrival is a trigger factor in the increase in LID in the CAR. The increase in LID implies a rise in carbon emission in the lodging infrastructure. Any increase in tourist arrivals increases lodging room occupancy; the increased lodging room occupancy contributes to carbon emissions. Thus, tourism trends contribute to the deterioration of the environmental quality and degradation of the natural resources in the CAR. A log-log model shows the percentage change in the average growth of tourist arrival and the percentage increase in carbon emissions. Establishments should observe standard room capacity to maintain the carbon emission of occupied lodging rooms at a minimum. Responsible leadership is a factor in the implementation of policy on standard room capacity.

The result of the study has some implications for the lodging businesses, the local government unit (LGU), the Department of Tourism (DOT) and the Department of Environment and Natural Resources (DENR) in the CAR. The study highlights the contribution of the lodging establishments to CO₂ emission, which can degrade the quality of the environment, and the implication of responsible leadership in managing natural resources in the CAR. The direct inverse relationship between energy use and CO₂ emission in hotels indicates that increased energy consumption leads to environmental degradation (Ahmad et al., 2018). Therefore, responsible leadership among policymakers in the lodging and government sectors – LGU, DOT and DENR – should abound in the CAR. Benchmarking on the model embarked from this study can help in designing and/or enhancing the policy on room capacity standardization, considering the total area with its maximum capacity to keep the carbon emission at a lower rate. Furthermore, as a responsible leader in the community, one should create programs that regulate the number of tourists visiting the place to decrease the number of overnight stays. Besides, having the political will to implement reduced room occupancy throughout the lodging establishments in CAR can help reduce the carbon emissions from the lodging businesses. After all, one of the aims of the International Environment Protection Organization is to reduce CO₂ emissions in the tourism industry. Hence, responsible leadership in environmental quality preservation and sustainable natural resource management must help prevent and avoid greenhouse gas (GHG) emissions.

Most studies about carbon emission in the environment tackle about carbon dioxide emitted by transportation and factories. This study adds to the insights on the existing information about the carbon emission in the environment from the lodging establishments through the use of LPG, electricity and water consumption in the occupied guest rooms. The findings of the study open an avenue for globally responsible leadership in sustaining environmental quality and preservation of natural resources by revisiting and amending the policies on the number of room occupancy, guidelines and standardization, considering the total lodging area with its maximum capacity to keep the carbon emission at a minimum, thus contributing to the lowering of GHG emissions from the lodging industry.

Three-dimensional (3D) printing is popular for many applications including the production of photocatalysts. This paper aims to focus on developing of 3D-printed photocatalyst-nano composite lattice structure. Digital light processing (DLP) 3D printing of photocatalyst composites was performed using photosensitive resin mixed with 0.5% Wt. of TiO₂ powder and varying amounts (0.025% Wt. to 0.2% Wt.) of graphene nanoplatelet powder. The photocatalytic efficiency of DLP 3D-printed photocatalyst TiO₂ composite was investigated, and the effects of nano graphite powder incorporation on the photocatalytic activity, thermal and mechanical properties were investigated.

Methods involve 3D computer-aided design modeling, printing parameters and comprehensive characterization techniques such as structural equation modeling, X-ray diffraction, thermogravimetric analysis, Fourier-transform infrared (FTIR) and mechanical testing.

Results highlight successful dispersion and characteristics of TiO₂ and graphene nanoplatelet (GNP) powders, intricate designs of 3D-printed lattice structures, and the influence of GNPs on thermal behavior and mechanical properties.

The study suggests applicability in wastewater treatment and environmental remediation, showcasing the adaptability of 3 D printing in designing effective photocatalysts. Future research should focus on practical applications and the long-term durability of these 3D-printed composites.

This study investigates the impact of the fire decay phase on structural damage using the sectional analysis method. The primary objective of this work is to forecast the non-dimensional capacity parameters for the axial and flexural load-carrying capacity of reinforced concrete (RC) sections for heating and the subsequent post-heating phase (decay phase) of the fire.

The sectional analysis method is used to determine the moment and axial capacities. The findings of sectional analysis and heat transfer for the heating stage are initially validated, and the analysis subsequently proceeds to determine the load capacity during the fire’s heating and decay phases by appropriately incorporating non-dimensional sectional and material parameters. The numerical analysis includes four fire curves with different cooling rates and steel percentages.

The study’s findings indicate that the rate at which the cooling process occurs after undergoing heating substantially impacts the axial and flexural capacity. The maximum degradation in axial and flexural capacity occurred in the range of 15–20% for cooling rates of 3 °C/min and 5 °C/min as compared to the capacity obtained at 120 min of heating for all steel percentages. As the fire cooling rate reduced to 1 °C/min, the highest deterioration in axial and flexural capacity reached 48–50% and 42–46%, respectively, in the post-heating stage.

The established non-dimensional parameters for axial and flexural capacity are limited to the analysed section in the study owing to the thermal profile, however, this can be modified depending on the section geometry and fire scenario.

The study primarily focusses on the degradation of axial and flexural capacity at various time intervals during the entire fire exposure, including heating and cooling. The findings obtained showed that following the completion of the fire’s heating phase, the structural capacity continued to decrease over the subsequent post-heating period. It is recommended that structural members' fire resistance designs encompass both the heating and cooling phases of a fire. Since the capacity degradation varies with fire duration, the conventional method is inadequate to design the load capacity for appropriate fire safety. Therefore, it is essential to adopt a performance-based approach while designing structural elements' capacity for the desired fire resistance rating. The proposed technique of using non-dimensional parameters will effectively support predicting the load capacity for required fire resistance.

The fire-resistant requirements for reinforced concrete structures are generally established based on standard fire exposure conditions, which account for the fire growth phase. However, it is important to note that concrete structures can experience internal damage over time during the decay phase of fires, which can be quantitatively determined using the proposed non-dimensional parameter approach.

Environmental degradation resulting from human activities may adversely affect human health in multiple ways. Until now, policies aimed at mitigating environmental problems such as climate change, environmental pollution and damage to biodiversity have failed to clearly identify and drive the potential benefits of these policies on health. The conducted study assesses and demonstrates how specific environmental policies and instruments influence perceived human health in order to ensure input for a data-driven decision process.

The study was conducted for the 2004–2020 period in European Union (EU) countries with the use of dynamic panel data modeling. Verification of specific policies' impact on dependent variables allows to indicate this their effectiveness and importance. As a result of the computed dynamic panel data models, it has been confirmed that a number of significant and meaningful relationships between the self-perceived health index and environmental variables can be identified.

There is a strong positive impact of environmental taxation on the health index, and the strength of this relationship causes effects to be observed in the very short term, even the following year. In addition, the development of renewable energy sources (RES) and the elimination of fossil fuels from the energy mix exert positive, although milder, effects on health. The reduction of ammonia emissions from agriculture and reducing noise pollution are other health-supporting factors that have been shown to be statistically valid. Results allow to identify the most efficient policies in the analyzed area in order to introduce those with the best results or a mix of such measures.

The results of the authors' research clearly indicate the health benefits of measures primarily aimed at improving environmental factors, such as environmental taxes in general. The authors have also discovered an unexpected negative impact of an increase in the share of energy taxes in total taxes on the health index. The presented study opens several possibilities for further investigation, especially in the context of the rapidly changing geopolitical environment and global efforts to respond to environmental and health challenges. The authors believe that the outcome of the authors' study may provide new arguments to policymakers pursuing solutions that are not always easily acceptable by the public.

This study aims to examine the relationship between the environment and tourism flows, as well as the economic variables of the 32 states of Mexico for the period 1999–2019 based on data availability. The related literature studying tourism and environmental impacts is scarce at a national level, with most of them being local case studies. Some international studies find that if the relationship exists, it is weak or nonexistent, using CO₂ as a proxy in most cases.

The present study uses panel data and cointegration panel methodologies, while also using geographic information systems to observe the distribution of variables at a state level between tourism and environmental variables.

The findings of the study are as follows: state gross domestic product, the inertia of environmental variables (i.e. volume of water treatment and solid waste), occupied rooms (proxy variable for tourism activity) and average temperature have an impact on the contemporary evolution of environmental variables; national and international tourist variables have no impact on the environment; the panels are integrated in such a way that there is a long-term equilibrium between states and some environmental care variables; and no conclusive evidence is found regarding the impact of tourism activity on the considered environmental variables.

The main limitations and areas of opportunity of the work refer to the amount of data available over time and the precision of the measurement of the variables. The availability, temporality and frequency of the data are also limitations of the research. An example of this is the nonexistence of CO₂ emissions at the state level. Additionally, studying other countries and regions for which there are limitations of data and applied studies is also a challenge.

The results are important for economies (in growth) and societies whose economic growth depends on tourism flows and have done little to reverse the damage that tourism has on the environment.

The models can contribute to study the relation between tourism and environmental variables and could be extended to regions, states and provinces for decision-making on actions to be taken for the present and future.

The originality of the research is innovative for the region: Mexico, Central and Latin America. There are no works that have studied these problems with this methodology and these variables. In terms of originality, the classic models of panel data and cointegration of panel data are useful and easily replicable for others to use for different countries. The results are relevant because there is apparently no relationship between tourism and some environmental variables in the short run, but there exists a weak and strong long-run relation between some of them.

本研究采用面板数据和协整面板模型方法, 同时利用地理信息系统(gis)观察州一级层面旅游和环境方面的变量分布。

本研究根据数据可用性, 研究了墨西哥32个州1999–2019年期间环境与旅游流量及经济变量之间的关系。在国家层面上研究旅游与环境影响的相关文献很少, 而且大多是地方的个案研究。一些国际研究发现, 即使有这种关系, 大多数案例中使用二氧化碳作为替代变量, 这种关系也是很弱或不存在。

i)国家国内生产总值, 环境变量的惯性(即水处理量和固体废物量), 占用的房间(旅游活动的代理变量)和平均温度对环境变量的现有演化有影响。ii)国内和国际旅游变量对环境没有影响。iii)面板数据以这样一种方式集成, 即国家和一些环境变量之间存在一种长期平衡。iv)关于旅游活动对所考虑的环境变量的影响没有确凿的证据。

这项工作的主要局限和机会领域是指随着时间的推移可获得的数据量和变量测量的精度。数据的可用性、时效性和频率也是本研究的局限性。这方面的一个例子是在州一级不存在二氧化碳排放。此外, 由于数据和应用研究的局限, 研究其他国家和地区也是一个挑战。

研究结果对经济增长依赖旅游业流量的经济体和社会具有重要意义, 这些经济体和社会对扭转旅游业对环境的破坏方面做得还不够。

这些模型有助于研究旅游业与环境变量之间的关系, 并可推广到地区、州和省, 以制定当前和未来的行动决策。

这项研究的原创性对该地区(墨西哥、中美洲和拉丁美洲)来说是具有创新性的。没有人用这种方法和这些变量研究过这些问题。就原创性而言, 面板数据和面板数据协整的经典模型是有用的且易于复制, 可供其他国家使用。 研究结果具有一定的相关性, 因为旅游业与部分环境变量在短期内不存在明显的相关性, 但在它们中的一些变量在长期内存在着或强或弱的相关性。

Se examina la relación entre medio ambiente y flujos turísticos, así como variables económicas de los 32 estados de México para el período 1999-2019 basado en la disponibilidad de datos. La literatura relacionada que estudia el turismo y los impactos ambientales es escasa a nivel nacional, siendo la mayoría de ellos estudios de casos locales. Estudios internacionales encuentran que, si la relación existe, es débil o inexistente, utilizando el CO2 como un indicador en la mayoría de los casos.

Se utilizaron metodologías de datos de panel y cointegración de panel, además sistemas de información geográfica para observar la distribución de variables a nivel estatal.

i) El Producto Interno Bruto Estatal, la inercia de las variables ambientales (es decir, volumen de tratamiento de agua y residuos sólidos), habitaciones ocupadas (proxy de la actividad turística) y temperatura promedio tienen un impacto en la evolución contemporánea de las variables ambientales, ii) las variables turísticas nacionales e internacionales no tienen un impacto en el medio ambiente, iii) los paneles están integrados de tal manera que existe un equilibrio a largo plazo entre turismo, crecimiento económico y algunas variables ambientales, y iv) no se encuentra evidencia concluyente con respecto al impacto de la actividad turística en las variables ambientales consideradas.

Las principales limitaciones y áreas de oportunidad del trabajo se refieren a la cantidad de datos disponibles en el tiempo y a la precisión de la medición de las variables. La disponibilidad, temporalidad y frecuencia de los datos también son limitaciones de la investigación. Un ejemplo de ello es la inexistencia de emisiones de CO2 a nivel estatal. Además, el estudio de otros países y regiones para los que existen limitaciones de datos y estudios aplicados también es un reto.

Los resultados son importantes para las economías (en crecimiento) y las sociedades cuyo crecimiento económico depende de los flujos turísticos y que han hecho poco por invertir los daños que el turismo produce en el medio ambiente.

Los modelos pueden contribuir a estudiar la relación entre el turismo y las variables medioambientales y podrían extenderse a regiones, estados y provincias para la toma de decisiones sobre las acciones a emprender para el presente y el futuro.

El artículo proporciona un análisis innovador y exploratorio hacia una perspectiva futura que agrega valor al turismo y la planificación para la sostenibilidad. La relación entre turismo y medio ambiente se ha estudiado durante varios años. La UNTWO ha abordado las consecuencias del turismo en el medio ambiente, particularmente, más basura, mayor consumo de agua, emisiones de CO2 y otros aspectos. Pocos trabajos estudian la relación entre estas variables.

La originalidad de la investigación es innovadora para la región: México, América Central y América Latina. No existen trabajos que hayan estudiado estos problemas con esta metodología y estas variables.

En términos de originalidad, los modelos clásicos de datos de panel y cointegración de datos de panel son útiles y fácilmente replicables para que otros los utilicen en diferentes países.

Los resultados son relevantes porque aparentemente no hay una relación entre el turismo y algunas variables ambientales a corto plazo, existe una relación débil y fuerte a largo plazo entre algunas de ellas.

This study establishes a method for predicting ground vibrations caused by railway tunnels in unsaturated soils with spatial variability.

First, an improved 2.5D finite-element-method-perfect-matching-layer (FEM-PML) model is proposed. The Galerkin method is used to derive the finite element expression in the ub-pl-pg format for unsaturated soil. Unlike the ub-v-w format, which has nine degrees of freedom per node, the ub-pl-pg format has only five degrees of freedom per node; this significantly enhances the calculation efficiency. The stretching function of the PML is adopted to handle the unlimited boundary domain. Additionally, the 2.5D FEM-PML model couples the tunnel, vehicle and track structures. Next, the spatial variability of the soil parameters is simulated by random fields using the Monte Carlo method. By incorporating random fields of soil parameters into the 2.5D FEM-PML model, the effect of soil spatial variability on ground vibrations is demonstrated using a case study.

The spatial variability of the soil parameters primarily affected the vibration acceleration amplitude but had a minor effect on its spatial distribution and attenuation over time. In addition, ground vibration acceleration was more affected by the spatial variability of the soil bulk modulus of compressibility than by that of saturation.

Using the 2.5D FEM-PML model in the ub-pl-pg format of unsaturated soil enhances the computational efficiency. On this basis, with the random fields established by Monte Carlo simulation, the model can calculate the reliability of soil dynamics, which was rarely considered by previous models.

The purpose of this study is to enhance the functional properties of Hessian fabric through resin finishing. Hessian bags made of lignocellulosic jute fiber are commonly used to pack, store and transport agro-commodities, including horticultural crops such as rice, potato, onion and wheat. However, because of high water affinity, these bags undergo degradation in properties due to moisture release by the stored commodities themselves. Exposure to natural elements, e.g. rain and dew, also causes moisture absorption in hessian bags. Once the bag gets moistened, degradation of jute bags starts due to microbial attack, leading to loss in tensile strength and change in extensibility, leading to ultimate breakage in warp and weft directions of the fabric.

To overcome the degradation in the functional properties of hessian fabric due to exposure to moisture and microbial attack, the application of semi-synthetic polymeric materials was carried out.

Tenacity, bursting strength, puncture resistance, tear strength and breaking load, as well as life cycle of resin-treated jute fabric was found to be better than control jute.

To the best of the authors’ knowledge, no recent reports of resin finishing on jute (hessian) fabric with semi-synthetic resins are presently available, other than coating with rubber.

Petroleum hydrocarbons are naturally occurring flammable fossil fuels used as conventional energy sources. It has carcinogenic, mutagenic properties and is considered a hazardous pollutant. Soil contaminated with petroleum hydrocarbons adversely affects the properties of soil. This paper aim to remove pollutants from the environment is an urgent need of the hour to maintain the proper functioning of soil ecosystems.

The ability of micro-organisms to degrade petroleum hydrocarbons makes it possible to use these microorganisms to clean the environment from petroleum pollution. For preparing this review, research papers and review articles related to petroleum hydrocarbons degradation by micro-organisms were collected from journals and various search engines.

Various physical and chemical methods are used for remediation of petroleum hydrocarbons contaminants. However, these methods have several disadvantages. This paper will discuss a novel understanding of petroleum hydrocarbons degradation and how micro-organisms help in petroleum-contaminated soil restoration. Bioremediation is recognized as the most environment-friendly technique for remediation. The research studies demonstrated that bacterial consortium have high biodegradation rate of petroleum hydrocarbons ranging from 83% to 89%.

Proper management of petroleum hydrocarbons pollutants from the environment is necessary because of their toxicity effects on human and environmental health.

This paper discussed novel mechanisms adopted by bacteria for biodegradation of petroleum hydrocarbons, aerobic and anaerobic biodegradation pathways, genes and enzymes involved in petroleum hydrocarbons biodegradation.

The case is written on the basis of published sources only.

Doodlage, a start-up incorporated in 2012 by Kriti Tula, Paras Arora and Vaibhav Kapoor, used discarded waste to create sustainable fashion products. It had a first-mover advantage in recycled fashion goods in the first 10 years of its existence. The company contributed to sustainable fashion by providing an alternative to fast fashion production, creating enormous clothing waste and environmental degradation. In the first quarter of 2022, it saved and reused 15,000 m of fabric waste. From 2018 to 2021, the company grew 150% annually, targeting the right customers and regions to expand its business. It ensured that postproduction industrial waste and postconsumption garments were used to produce clothes. It also confirmed that the waste generated in its fabric screening process was used to create stationery items and other valuable accessories.

However, the sustainable fashion model that gave the company a competitive advantage became obsolete in 2022 due to increasing competition in the industry as various players using unique ideas entered the market. The company is encountering operational and logistical challenges that are affecting its performance. The demand for its products was also subdued due to high prices of upcycled and recycled clothes and less consumer spending post-COVID pandemic. The competitors of Doodlage offered multiple products produced using environmentally friendly farming and manufacturing techniques, attracting sustainable purchasers. What should be the new portfolio of products for the company to explore future growth opportunities? Considering their vast price, can consumers be encouraged to buy upcycled clothes? How should the company ride the winds of change in the industry?

The instructor should initiate the class discussion by asking questions such as how frequently do you shop for clothes? Do you care about the fabric of your apparel? After you discard your clothes, do you think about where these goods finally end up? Data on the amount of total waste generated in the fashion industry should be communicated to students to connect it with the importance of the concept of circular economy. Post this, the instructor should introduce the business model of Doodlage to bring the discussion into the context of the fashion industry before going ahead to discuss the company’s dilemma.

This study aims to develop an entrepreneurial business model capable of addressing and preventing the exploitation and inequality that traditionally have resulted from entrepreneurship, particularly in emerging economies.

The research uses systems thinking, the first law of cybernetics, and the principles of harmony to formulate a systemic solution to the problem, which it exemplifies via six purposefully selected short cases drawn from diverse industry sectors and economies.

This paper demonstrates how the conventional model of entrepreneurship, often associated with colonial exploitation and resultant inequalities, can be transformed into a triple bottom line model—harmonious entrepreneurship – that integrates the traditional economic, eco-, humane, and social approaches and creates a synergy where profit, planet, and people are in harmony. The model challenges the profit maximisation/shareholder value doctrine of business success.

Only six cases are presented here, and there is a need for further research in different political-economic contexts and industry sectors. Also, the way entrepreneurship is taught needs to change so that it addresses the sustainability challenge in general and the problem of inequality in particular.

There needs to be a change in the entrepreneurial mindset and the way entrepreneurship is taught and potential entrepreneurs are trained if entrepreneurship is to address the sustainability challenge in general and the problem of inequality in particular.

This is a novel approach to the study of entrepreneurship and its impact on inequality that shows how it can ameliorate and/or prevent inequality, particularly in emerging economies, by adopting a more holistic approach to business success and supplanting “having and needing” with “being and caring”.