Search results

The purpose of this paper is to study thermal-fluid-solid coupling deformation and friction failure mechanism of bearing friction pairs under the working conditions of high speed and heavy load.

The deformation is simulated based on thermal-fluid-solid coupling method, its deformation distribution law is revealed and the relationships of deformation of friction pairs, rotational speed and bearing weight are obtained.

The results prove that the oil film temperature rises sharply, the lubricating oil viscosity decreases rapidly, the film thickness becomes thinner, the deformation increases, the whole deformation is uneven and the boundary lubrication or dry friction are caused with the increase in rotational speed and bearing load.

The conclusions provide theoretical method for deformation solution and friction failure mechanism of hydrostatic thrust bearing.

This paper aims to investigate the micro-plastic behavior of granular material in three-body friction interface and its effect on friction characteristics.

A numerical model of particle breakage in friction contact was constructed based on the discrete element method. The influence of friction pair working condition and internal bonding strength on the micro-plastic behavior of particulate matter was analyzed. A reciprocating linear tribometer was used to verify the simulation results.

The results show that when the granular materials are squeezed and sheared by the friction pair, a shear zone inclined to the left is gradually formed, which leads to particle breakage. The breakage of the particle leads to the reduction of load-bearing capacity and the increase of friction coefficient. Due to the differences in bond strength and friction pairs working conditions, the particle plastic behavior is divided into the following three states: elastic deformation, breakage and plastic rheology.

This study is helpful to understand the effect of the micro-plastic behavior of particles on the three-body friction characteristics.

Hydrostatic thrust bearing is a key component of the vertical CNC machining equipment, and often results in friction failure under the working condition of high speed and heavy load. The lubricating oil film becomes thin or breaks because of high speed and heavy load and it affects the high precision and stable operation of the vertical CNC machining equipment; hence, it is an effective way of avoiding friction failure for achieving the oil film shape prediction

For the hydrostatic thrust bearing with double rectangular cavities, researchers solve the deformation of the friction pairs in hydrostatic bearing by using the computation of hydrodynamics, elasticity theory, finite element method and fluid-thermal-mechanical coupled method. The deformation includes heat deformation and elasticity deformation, the shape of gap oil film is got according to the deformation of the friction pairs in hydrostatic bearing, and gets the shape of gap oil film, and determines the influencing factors and laws of the oil film shape, and achieves the prediction of oil film shape, and ascertains the mechanism of friction failure. An experimental verification is carried out.

Results show that the deformation of the rotational workbench is upturned along its radial direction under the working condition of high speed and heavy load. However, the deformation of the base is downturned along its radial direction and the deformation law of the gap oil film along the radius direction is estimated; the outer diameter is close but the inner diameter is divergent wedge.

The conclusion can provide a theoretical basis for the oil film control of hydrostatic thrust bearing and improve the stability of vertical CNC machining equipment.

During the operation of a wet clutch, there are fluctuations in speed and torque, which have an impact on the stability of the clutch and the strength of the friction plate and the spline pair of the dual steel plate. The purpose of this study is to investigate the vibration characteristics of the wet clutch and the dynamic load characteristics of the spline pairs.

The spline pair model is established by the piecewise linear function method, and on this basis, dynamic equations considering the spline pair of dual steel plates and friction plates are established. Considering that the wet clutch has multiple spline pairs, an equivalent model of the number of teeth and the equivalent model of the tooth width were proposed, and the Runge-Kutta numerical method was used for the wet clutch for these two models.

The research results show that the equal tooth number model has greater meshing stiffness and smaller fluctuation than the constant tooth width model, which shows that increasing the meshing stiffness of the system is beneficial to reduce system fluctuation and improve system stability.

The friction plate has the system that multiple splines are independent of each other, which is relatively complicated. Therefore, an equivalent calculation is performed on multiple pairs of steel plates (friction plates) to simplify the calculation of the spline pairs.

This paper provides a theoretical basis for further dynamic characteristics analysis of wet clutch and reducing fluctuation of speed and torque.

Dynamic equation considering the spline pair of the dual steel plates and the friction plates is established to study the vibration characteristics of the wet clutch and the dynamic load characteristics of the spline pair, etc.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2023-0078/

This paper aims to investigate the correlation between wear behavior and microstructure evolution in friction-induced deformation layers (FDL) of 30CrMnSi steel, especially the role of strain-hardening induced by plastic deformation in FDL, which accordingly alters the wear behavior.

Dry sliding friction and wear behaviors of the 30CrMnSi steel against quenched and tempered GCr15 steel were studied using a pin-on-disc tester. The microstructure, hardness and plastic deformation of FDL were investigated.

It was found that the evolution of microstructure and strain-hardening induced by plastic deformation were occurred in the subsurface. When the microstructure, hardness and depth of the plastic deformation layer (PDL) reached a relatively steady state, the friction process transformed into stable-state stage. The wear loss and depth of the PDL was in dynamic equilibrium at stable wear stage.

In this paper, the correlation among the microstructure evolution, the strain-hardening and wear behavior were systemically analyzed. This paper could provide a theoretical reference for optimizing the microstructure and strain hardening properties of tribo-pairs materials.

As the transmission component of a locomotive, the traction gear pair system has a direct effect on the stability and reliability of the whole machine. This paper aims to provide a detailed dynamic analysis for the traction system under internal and external excitations by numerical simulation.

A non-linear dynamic model of locomotive traction gear pair system is proposed, where the comprehensive time-varying meshing stiffness is obtained through the Ishikawa formula method and verified by the energy method, and then the sliding friction excitation is analyzed based on the location of the contact line. Meantime, the adhesion torque is constructed as a function of the adhesion-slip feature between wheelset and rail. Through Runge–Kutta numerical method, the system responses are studied with varying bifurcation parameters consisting of exciting frequency, load fluctuation, gear backlash, error fluctuation and friction coefficient. The dynamic behaviors of the system are analyzed and discussed from bifurcation diagram, time history, spectrum plot, phase portrait, Poincaré map and three-dimensional frequency spectrum.

The analysis results reveal that as control parameters vary the system experiences complex transition among a diverse range of motion states such as one-periodic, multi-periodic and chaotic motions. Specifically, the significant difference in system bifurcation characteristics can be observed under different adhesion conditions. The suitable gear backlash and error fluctuation can avoid the chaotic motion, and thus, reduce the vibration amplitude of the system. Similarly, the increasing friction coefficient can also suppress the unstable state and improve the stability of the system.

The numerical results may provide a systemic understanding of dynamic characteristics and present some available information to design and optimize the transmission performance of the locomotive traction system.

To address the lack of data in this field and determine the relationship between the coefficient of friction and the interference between locomotive wheels and axles, this study evaluates the theoretical relationship between the coefficient of friction and the interference under elastic deformation.

When using numerical analyses to study the mechanical state of the contacting components of the wheels and axle, the interference between the axle parts and the coefficient of friction between the axle parts are two important influencing factors. Currently, as the range of the coefficient of friction between the wheel and axle in interference remains unknown, it is generally considered that the coefficient of friction is only related to the materials of the friction pair; the relationship between the interference and the coefficient of friction is often neglected.

A total of 520 press-fitting experiments were conducted for 130 sets of wheels and axles of the HXD2 locomotive with 4 types of interferences, in order to obtain the relationship between the coefficient of friction between the locomotive wheel and axle and the amount of interference. These results are expected to serve as a reference for selecting the coefficient of friction when designing axle structures with the rolling stock, research on the press-fitting process and evaluations of the fatigue life.

The study provides a basis for the selection of friction coefficient and interference amount in the design of locomotive wheels and axles.

The purpose of this study is to investigate the influence of surface texture on the subsurface characteristics of contact interfaces under elastohydrodynamic lubrication condition. As a typical contact form of gears and bearings, the optimization of friction characteristics at the elastohydrodynamic lubrication (EHL) interface has attracted the attention of scholars. Laser surface texturing is a feasible optimization solution, but there have been concerns about whether the surface texture of high-pair parts will affect their fatigue life.

To examine the impact of texture preparation on the subsurface characteristics of high-pair interfaces under EHL conditions, a point contact EHL model is developed that takes into account the effect of textured surface topography. The pressure and thickness of the oil film are calculated as input parameters under different loads and entrainment velocities. The finite element method is used to simulate the impact of textures with varying diameters, densities and depths on the subsurface characteristics of the elastohydrodynamic interface. According to ISO 25178, analyze the relationship between 3D topography parameters and subsurface characteristics and study the trend of friction characteristics and subsurface characteristics based on the results of the ball on disc friction tests.

The outcomes suggest that under different rotational velocity and load conditions, the textured surfaces exhibit improved friction reduction effects; however, the creation of textures can result in significant subsurface plastic deformation and local peeling. The existence of texture makes the larger stress zone in the subsurface layer closer to the surface, leading to fatigue failure near the surface. Reasonable design parameters can help enhance the attributes of the subsurface. A smaller Sa and a Str greater than 0.5 can achieve ideal subsurface properties on the textured surface.

This paper investigates the influence of surface texture on the friction and subsurface characteristics of EHL interfaces and analyzes the impact of surface texture on interface contact performance while achieving lubrication improvement functional characteristics. The results provide theoretical support for the optimization design and functional regulation of surface texture in EHL interfaces.

The peer review history for this article is https://publons.com/publon/10.1108/ILT-10-2023-0324/

Copper matrix composites are widely used in high-voltage switches, electrified railways and other electric friction fields. The purpose of this study is to improve its wear resistance and investigate the effect of hybrid carbon nanotubes (CNTs) and titanium diboride (TiB₂) particles reinforced copper matrix composites on electrical wear performance.

CNTs and TiB₂ particles were introduced into copper matrix simultaneously by powder metallurgy combined with electroless copper plating. Electrical wear performance of the composites was studied on self-made pin on disk electrical wear tester.

The results show that the friction coefficient and wear rate of (1CNTs–4TiB₂)/Cu composite are respectively reduced by 40% and 25.3%, compared with single TiB₂/Cu composites. The micron-sized TiB₂ particles can hinder the plastic deformation of composites, and bear part of the load to weaken the wear rate of composites. CNTs with the self-lubricating property can form lubricating layer to reduce the friction coefficient of composites.

This work can provide a design method for further improving the wear properties of TiB₂/Cu composites.

Contact problems are among the most difficult ones in mechanics. Due to its practical importance, the problem has been receiving extensive research work over the years. The finite element method has been widely used to solve contact problems with various grades of complexity. Great progress has been made on both theoretical studies and engineering applications. This paper reviews some of the main developments in contact theories and finite element solution techniques for static contact problems. Classical and variational formulations of the problem are first given and then finite element solution techniques are reviewed. Available constraint methods, friction laws and contact searching algorithms are also briefly described. At the end of the paper, a bibliography is included, listing about seven hundred papers which are related to static contact problems and have been published in various journals and conference proceedings from 1976.