Search results

The purpose of this paper is to evaluate the impact of modern and traditional decortication methods on the chemical composition, antinutrients, Ca, P and Fe contents during storage of two pearl millet cultivars (white and green) grown in Sudan.

The grains of each cultivar were either decorticated traditionally using traditional stone dehuller or by using modern dehuller. The chemical composition, antinutrients and Ca, P and Fe contents of the cultivars were evaluated during storage for six months.

The results showed that both methods of decortication (modern and traditional) employed significantly decreased ash, protein, oil and crude fiber contents but increased moisture and nitrogen free extract contents of the grains for both cultivars. Storage resulted in a slight and gradual decrease in the chemical composition of the treated and untreated grains of the cultivars. Modern decortication of the grains significantly (P=0.05) reduced tannin content in both cultivars compared to untreated and traditionally decorticated grains. Phytic acid content of the white cultivar was not affected by the method of decortication used but modern decortication reduced that of green cultivar. Decrease in tannin and phytic acid was observed as the storage continued in both treated and untreated cultivars. Decortication significantly (P=0.05) reduced the Ca, P and Fe contents in both cultivars grains. Lower P and Fe contents were found in modern decorticated grains compared to traditional decorticated ones. Storage of the cultivars resulted in gradual decrease in Ca, P and Fe contents.

Processing methods such as decortication affect the quality attributes of pearl millet cultivars. The application of modern decortication method on pearl millet cultivars has better quality attributes than those treated with traditional decortication.

The study uses decortication methods (traditional and modern) to improve the quality attributes of pearl millet cultivars. Antinutrients such as tannin and phytic acid were observed to reduce the bioavailability of minerals like Fe. Decortication of the grains significantly reduced the level of such antinutrients and improved bioavailability of minerals.

The purpose of this study is to analyse the characteristics of cellulose fibres derived from the pseudo-stems of Curcuma longa and to evaluate the properties of non-woven fabric produced using these fibres.

The fibres were extracted via a decortication method. The acquired intrinsic qualities of the fibres were used to assess the feasibility of using them in textile applications. The thermal bonding approach was used for the development of the non-woven fabric, using a hot press machine with low-melt polyester fibre as a binder.

The mean length of Curcuma longa fibres was determined to be 52.73 cm, with a fineness value of 4.00 tex. The fibres exhibited an uneven cross-sectional morphology, characterized by a diverse range of oval-shaped lumens. The fibre exhibited a tenacity of 1.45 g/denier and an elongation value of 4.30%. The fibres possessed a moisture regain value of 11.30%. The experimental non-woven fabrics had consistent weight and thickness, while exhibiting different properties in terms of tensile strength and air permeability, with Fabric C having the highest tensile strength and the lowest air permeability value.

The features of Curcuma longa fibre, obtained with the decortication process, exhibited suitability for textile applications. Three experimental non-woven fabrics comprising different compositions of Curcuma longa fibre and low-melt polyester fibre were produced. The tensile strength and air permeability properties of these fabrics were influenced by the composition of the fibres.

Pearl millet (Pennisetum glaucum) is a rich source of nutrients as compared to the major cultivated cereal crops. However, major factors which limit its utilization are the presence of anti-nutritional factors (phytate, tannins and polyphenols) which lower availability of minerals and poor keeping quality because of higher lipase activity. Therefore, this paper aims to focus on the impact of different processing methods on the nutrient composition and anti-nutritional components of pearl millet.

This is a literature review study from 1983 to 2017, focusing on studies related to pearl millet processing and their effectiveness in the enrichment of nutritional value through reduction of anti-nutritional compounds.

From the literature reviewed, pearl millet processing through various methods including milling, malting, fermentation, blanching and acid as well as heat treatments were found to be effective in achieving the higher mineral digestibility, retardation of off flavor, bitterness as well as rancidity problems found during storage of flour.

Through this review paper, possible processing methods and their impact on the nutrient and anti-nutrient profile of pearl millet are discussed after detailed studied of literature from journal articles and thesis.

In Nigeria, the mango fruits consumption rate is high during its peak period and this has always resulted in environmental sanitation problem because the mango seeds are thrown to the surroundings immediately the fruits are eaten. Finding more useful application of the kernel would be a way to reduce the environmental pollution. Mechanical decortication of the leathery mango stone remains the only viable option that can support any prospected commercial uses of the mango kernel.

The decorticator consists of a hopper, a decorticating chamber, spiked shaft, screen shaker and discharge spout. The machine performance was evaluated in terms of decorticating efficiency, mechanical damage and sieve loss.

Results of the evaluation show that the optimum performance of the decorticator was at a speed of 900rpm, feed rate of 250kg/h and power requirement of 2.50kW.

Mango stones are useful as substitute for maize in finishing broiler diets. The kernel is also used for medicinal purposes in moderation of anti‐bacterial and anti‐fungal activities. Therefore, the designed mango stone decorticator enhances the complete mechanization processes of mango products.

Sorghum is quite comparable to wheat, rich source of nutrients with various health benefits, and therefore considered as a grain of future. The purpose of this paper is to review the bioactive active compounds, health benefits and processing of the sorghum. Sorghum is utilized for animal feeding rather than the human food usage. Therefore, this paper focuses on the emerging new health foods with benefits of the sorghum.

Major well-known bibliometric information sources searched were the Web of Science, Google Scholar, Scopus and PubMed. Several keywords like nutritional value of sorghum, bioactive compounds present in sorghum, health benefits of sorghum and processing of sorghum were chosen to obtain a large range of papers to be analyzed. A final inventory of 91 scientific sources was made after sorting and classifying them according to different criteria based on topic, academic field country of origin and year of publication.

From the literature reviewed, sorghum processing through various methods, including milling, malting, fermentation and blanching, bioactive compounds, as well as health benefits of sorghum were found and discussed.

Through this paper, possible processing methods and health benefits of sorghum are discussed after detailed studies of literature from journal articles.

This paper aims to analyze the economic viability of jatropha plantation in North East India.

Economic viability is measured through the net present value and the benefit–cost ratio (BCR) at four different production standards along with four different prices of jatropha seed.

At a very low price and small production, jatropha plantation is economically not feasible. However, when the price of seed increases from INR 5 to 8, BCRs become greater than 1, provided that the discount rate is less than equal to 8 per cent. The minimum threshold of BCR indicates that the threshold of 1.5 BCR at a production level of 1.5 tons/ha can be achieved with a combination of seed price of INR 10 per kg and a discount rate of 1 to 3 per cent. Thus, jatropha cultivation is economically viable but not highly profitable.

Present study analyzes the economic viability of jatropha plantation from purely financial point of view. Social cost and benefit of energy crop plantation is not included in the study. This suggests to adopt social cost–benefit analysis to evaluate the overall feasibility of plantation crops in future studies.

This paper contributes to the academic literature of economic viability of energy plantation crops. Economic viability of jatropha plantation is shown in different cost and revenue conditions with statistical evidences.

The aim of this paper is to evaluate the nutrient and sensory properties of dambu, a steamed granulated dumpling product produced from maize (Zea mays), millet (Pennisetum glaucum), sorghum (Sorghum bicolor), and acha (Digitaria exilis), grains. It is a popular midday meal of the Fulanis of Nigeria, normally sprinkled into fermented skimmed milk or whole milk and sugar may be added to taste.

Dambu was prepared in the laboratory using decorticated clean cereal grains, which were pulverized into coarse particles, mixed with spices and water, and steamed for 20 min. Analysis was carried out on the products following document and established procedures.

Data obtained indicated that dambu contained an appreciable amount of protein (10.1‐10.7 per cent) and fat (2.2‐3.4 per cent). The moisture and ash contents were found to range from 35 to 38 per cent and 0.5 to 1.2 per cent, respectively; crude fibre ranged from 1.8 to 2.1 per cent; carbohydrate ranged from 45 to 49 per cent and the energy ranged from 247 to 264 kcal/100 g. The amino acid profiles of the dambu showed that the different dambu products contain both essential and non‐essential amino acids. The mineral contents were found to be high in potassium, phosphorus, calcium, zinc, and magnesium. The mean scores of aroma, chewiness, and overall acceptability for the products were not significantly different (p > 0.05) but difference existed in the texture and appearance.

The consumption of dambu from different cereal grains is encouraged; especially where a particular cereal is off season, the other grains could be used as a substitute and complementary.

The findings here suggested that dambu is necessary to cereal industry and baby foods (weaning foods).

The results of this research contribute to the knowledge of cereal meals, especially those that are indigenous to Nigeria and West Africa.

The purpose of the paper was to present a specific case study of how 3D printing was introduced in the chest wall construction process of a specific patient with unique medical condition. A life-size 3D model of the patient’s chest wall was 3D printed for pre-surgical planning. The intent was to eliminate the need for operative exposure to map the pathological area. The model was used for preoperative visualization and formation of a 1-mm thick titanium plate implant, which was placed in the patient during chest wall reconstructive surgery. The purpose of the surgery was to relive debilitating chronic pain due to right scapular entrapment.

The patient was born with a twisted spine. Over time, it progressed to severe and debilitating scoliosis, which required the use of a thoracic brace. Computerized tomography (CT) data were converted to a 3D printed model. The model was used to size and form a 1-mm thick titanium plate implant. It was also used to determine the ideal location for placement of the plate during thoracotomy preoperatively.

The surgery, aided by the model, was successful and resulted in a significantly smaller incision. The techniques reduced invasiveness and enabled the doctors to conduct the procedure efficiently and decreased surgery time. The patient experienced relief of the chronic debilitating pain and no longer need the thoracic brace.

The 3D model facilitated pre-operative planning and modeling of the implant. It also enabled accurate incision locations of the thoracotomy site and placement of the implant. Although chest wall reconstruction surgeries have been undertaken, this paper documents a specific case study of chest wall construction fora specific patient with unique pathological conditions.

This paper aims to study the changes in anti‐nutritional factors during the germination of the Indian bean and also to carryout an evaluation by subjecting it to different cooking treatments – boiling, roasting and pressure cooking.

The healthy Indian bean (Dolichos lablab L.) seeds were soaked for 12 h and allowed to germinate (sprout) at room temperature 27±2^○C for a period of 32 h. Seedlings were withdrawn at designated time intervals and used for analysis of anti‐nutritional factors like trypsin inhibitory activity (TIA), phytic acid, polyphenols and tannins of dried and germinated cotyledons. They were also evaluated regarding their changes by subjecting to different cooking treatments – boiling, roasting and pressure cooking.

The raw dry Indian bean had a very high TIA which decreases progressively to 17 per cent at 32 h germination period. An overall fall in polyphenols of 70 per cent, tannins 46 per cent, phytic acids 36 per cent and phytate phosphorus to 30 per cent was noticed during the 32 h germination period. Maximum reduction was observed in TIA and phytic acids with roasting, while the boiling and pressure cooking decreases the levels of polyphenols and tannins.

The paper proves that germination is a more effective method in reducing TIA, tannins, polyphenols and phytic acid than the various cooking treatments.

This paper is a systemic review on enset plant’s role in Ethiopian people’s life as the source of food. This paper aims to summarize the traditional processing and preparation methods of enset-based foods and their nutritional composition.

Available scientific articles were collected and reviewed for enset plant evaluation, description, enset plant’s role in Ethiopian people’s food security, post harvesting and traditional processing of enset plants, microbiology of the fermented enset foods, different foods reported from enset, nutritional profile of the three food from enset base (kocho, bulla and amicho) and other non-food applications of enset plant.

Enset plant has a predominant role in people living in the southern part of Ethiopia. This plant is drought-tolerant and provides many non-food applications. Harvesting of the enset plant, preparing for fermentation and food preparations follow the traditional route by using the indigenous knowledge and practices. Limited studies have been reported on the microbiology of the enset fermentation, but various types of microbes have been reported. In case of nutritional composition, foods from enset are reported to contain high carbohydrate and minerals content, such as calcium, potassium and zinc, but limited protein content; they are also the best source of the essential amino acids such as lysine and leucine. Limited data are available on vitamins, anti-oxidant and fatty acids profiles of enset-based foods. The existing data indicate variations, and the reasons for variability are discussed in this paper.

Scientific reviews on enset food nutrition profile and related issues are scarce; this paper will compile information about enset plant-based foods for researchers for their future research.