Search results

The purpose of this paper is to exploit a database of pre-existing designs to accelerate parametric optimization of antenna structures is investigated.

The usefulness of pre-existing designs for rapid design of antennas is investigated. The proposed approach exploits the database existing antenna base designs to determine a good starting point for structure optimization and its response sensitivities. The considered method is suitable for handling computationally expensive models, which are evaluated using full-wave electromagnetic (EM) simulations. Numerical case studies are provided demonstrating the feasibility of the framework for the design of real-world structures.

The use of pre-existing designs enables rapid identification of a good starting point for antenna optimization and speeds-up estimation of the structure response sensitivities. The base designs can be arranged into subsets (simplexes) in the objective space and used to represent the target vector, i.e. the starting point for structure design. The base closest base point w.r.t. the initial design can be used to initialize Jacobian for local optimization. Moreover, local optimization costs can be reduced through the use of Broyden formula for Jacobian updates in consecutive iterations.

The study investigates the possibility of reusing pre-existing designs for the acceleration of antenna optimization. The proposed technique enables the identification of a good starting point and reduces the number of expensive EM simulations required to obtain the final design.

The proposed design framework proved to be useful for the identification of good initial design and rapid optimization of modern antennas. Identification of the starting point for the design of such structures is extremely challenging when using conventional methods involving parametric studies or repetitive local optimizations. The presented methodology proved to be a useful design and geometry scaling tool when previously obtained designs are available for the same antenna structure.

The purpose of this paper is to present a Design for Additive Manufacturing (DfAM) methodology that connects several methods, from geometrical design to post-process selection, into a common optimisation framework.

A design methodology is formulated and tested in a case study. The outcome of the case study is analysed by comparing the obtained results with alternative designs achieved by using other design methods. The design process in the case study and the potential of the method to be used in different settings are also discussed. Finally, the work is concluded by stating the main contribution of the paper and highlighting where further research is needed.

The proposed method is implemented in a novel framework which is applied to a physical component in the case study. The component is a structural aircraft part that was designed to minimise weight while respecting several static and fatigue structural load cases. An addition goal is to minimise the manufacturing cost. Designs optimised for manufacturing by two different AM machines (EOS M400 and Arcam Q20+), with and without post-processing (centrifugal finishing) are considered. The designs achieved in this study show a significant reduction in both weight and cost compared to one AM manufactured geometry designed using more conventional methods and one design milled in aluminium.

The method in this paper allows for the holistic design and optimisation of components while considering manufacturability, cost and component functionality. Within the same framework, designs optimised for different setups of AM machines and post-processing can be automatically evaluated without any additional manual work.

The study, within the Increasing Resilience of Cultural Heritage (ResCult) project, aims to support civil protection to prevent, lessen and mitigate disasters impacts on cultural heritage using a unique standardised-3D geographical information system (GIS), including both heritage and risk and hazard information.

A top-down approach, starting from existing standards (an INSPIRE extension integrated with other parts from the standardised and shared structure), was completed with a bottom-up integration according to current requirements for disaster prevention procedures and risk analyses. The results were validated and tested in case studies (differentiated concerning the hazard and type of protected heritage) and refined during user forums.

Besides the ensuing reusable database structure, the filling with case studies data underlined the tough challenges and allowed proposing a sample of workflows and possible guidelines. The interfaces are provided to use the obtained knowledge base.

The increasing number of natural disasters could severely damage the cultural heritage, causing permanent damage to movable and immovable assets and tangible and intangible heritage. The study provides an original tool properly relating the (spatial) information regarding cultural heritage and the risk factors in a unique archive as a standard-based European tool to cope with these frequent losses, preventing risk.

This paper aims to review recent research in design for additive manufacturing (DfAM), including additive manufacturing (AM) terminology, trends, methods, classification of DfAM methods and software. The focus is on the design engineer’s role in the DfAM process and includes which design methods and tools exist to aid the design process. This includes methods, guidelines and software to achieve design optimization and in further steps to increase the level of design automation for metal AM techniques. The research has a special interest in structural optimization and the coupling between topology optimization and AM.

The method used in the review consists of six rounds in which literature was sequentially collected, sorted and removed. Full presentation of the method used could be found in the paper.

Existing DfAM research has been divided into three main groups – component, part and process design – and based on the review of existing DfAM methods, a proposal for a DfAM process has been compiled. Design support suitable for use by design engineers is linked to each step in the compiled DfAM process. Finally, the review suggests a possible new DfAM process that allows a higher degree of design automation than today’s process. Furthermore, research areas that need to be further developed to achieve this framework are pointed out.

The review maps existing research in design for additive manufacturing and compiles a proposed design method. For each step in the proposed method, existing methods and software are coupled. This type of overall methodology with connecting methods and software did not exist before. The work also contributes with a discussion regarding future design process and automation.

The objective of this study is to establish a link between religiosity and Corporate Social Responsibility (CSR) by conducting a systematic literature review in the field of CSR and religiosity. This will be achieved by screening all available electronic databases.

This paper is a literature review paper using the systematic review – Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) approach, with a practical focus on empirical research to summarize the total effect or outcome of these empirical findings. The methodology includes inclusion and exclusion criteria for the final selection of articles.

In this paper, 31 articles published in well-known CSR journals after the year 2015 were included. The majority of the literature confirms a positive direct/indirect relationship between religiosity and CSR.

This paper is limited to the considered databases and the identified searching protocols. Changes in the referred databases or search protocols may affect the results, as results outside these limitations were not considered in this study.

This study can serve as a guide for researchers in applying the PRISMA approach. Furthermore, it contributes to the field of religiosity and CSR by offering a comprehensive review of the most recent related publications.

This article is unique as it applies the PRISMA framework to conduct the literature review. It is also the first literature study in the field of religiosity and CSR.

Group reporting, a form of cooperative learning, is a learning tool often employed in residential teaching to facilitate quality learning. Like other cooperative learning methods, it enhances learning in classrooms by allowing students work on activities in small groups to receive rewards based on their group’s performance. However, though group reporting is often done in face-to-face settings, few up-to-date literature has shown its application in online learning. Moreover, the question as to whether online cooperative learning through group reports yields positive or negative response from students has to be studied further. The paper aims to discuss these issues.

This study focuses on the students’ response to the group reporting activity carried throughout one semester. A course offered by the University of the Philippines Open University on database management systems made use of group reporting to add to the students’ learning experience. Group meetings along with regular online lectures were carried out during the first half of the semester. The output group reports were then presented during the second half and served as the main resource for those weeks’ study modules. An online survey with Likert scales drawing out the student reactions on the learning activity impact was administered to volunteer respondents at the end of classes.

In total, 71.9 percent of 32 respondents observed changes in their behavior after using peer and cooperative learning technologies. The respondents also indicated that they enjoyed the group reporting activity (14 agreeing strongly, 14 agreeing moderately). They also indicated that they were motivated to learn the course through the group reports (8 agreeing strongly, 14 agreeing moderately). However, when asked if they preferred to have all the modules in group report format 9 agreed moderately, 8 disagreed moderately, 7 disagreed strongly, 4 agreed strongly, and 4 neither agreed nor disagreed. Still, overall, online cooperative learning facilitated quality learning based on this study’s results.

This study contributes to the body of knowledge by showing how group reporting can be applied online and how students have responded to it. The study also provides recommendations on how to conduct online cooperative learning in order to enhance the quality of courses, with implications for further research to look into variations with respect to the technology used for reporting and its suitability to a given course.

This study aims to present a twofold machine learning (ML) model, namely, EDU-AI, and its implementation in educational buildings. The specific focus is on classroom layout design, which is investigated regarding implementation of ML in the early phases of design.

This study introduces the framework of the EDU-AI, which adopts generative adversarial networks (GAN) architecture and Pix2Pix method. The processes of data collection, data set preparation, training, validation and evaluation for the proposed model are presented. The ML model is trained over two coupled data sets of classroom layouts extracted from a typical school project database of the Ministry of National Education of the Republic of Turkey and validated with foreign classroom boundaries. The generated classroom layouts are objectively evaluated through the structural similarity method (SSIM).

The implementation of EDU-AI generates classroom layouts despite the use of a small data set. Objective evaluations show that EDU-AI can provide satisfactory outputs for given classroom boundaries regardless of shape complexity (reserved for validation and newly synthesized).

EDU-AI specifically contributes to the automation of classroom layout generation using ML-based algorithms. EDU-AI’s two-step framework enables the generation of zoning for any given classroom boundary and furnishing for the previously generated zone. EDU-AI can also be used in the early design phase of school projects in other countries. It can be adapted to the architectural typologies involving footprint, zoning and furnishing relations.

This paper aims to create a new searchable 3D city model to help managers improve their decision-making.

This paper identifies data management basics and the key elements used in the new model design; it further analyzes five-city models, presents its findings and proposes analytical trends for the new model. It discusses the concepts underlying existing models, explains the benefit brought by the proposed model and demonstrates its robustness.

City systems can be interconnected, thanks to data digitization and the integration of new technologies into different management processes. Although there are several 3D city models available, none of those identified in this research can be queried for several sectors.

This model design can only be successfully realized in the presence of a public mandate. Potential limitations include information security risks and political non-acceptance.

The present work proposes a searchable and high performance model having the distinctive capacity to bring together city systems and perform real-time data analysis in order to extract important information needed to guide the city, and in the context of a global vision.

The key aim of this study is to highlight current financial technology (FinTech) trends by conducting a bibliometric review of literature derived from the Scopus database.

A bibliometric analysis was conducted on articles gathered from the Scopus database. Microsoft Excel was used to perform the frequency analysis, VOSviewer for visualising the data, and Harzing’s Publish or Perish for the metrics citation.

According to this investigation, research into FinTech has been consistently increasing since 2008. The results indicate that the most active publisher of FinTech literature is Bina Nusantara University in Indonesia. In terms of country of publication, China is identified as the most active. The most cited author is Buckley, R.P., with Rabbani, M.R., having the most publications. It was also identified that FinTech researches come under three primary domains namely business management, computer science and economics.

The primary limitation of this current study is that it only relied on one data source, i.e. Scopus. Implications wise, researchers and practitioners can gain a deeper understanding of FinTech from this study, which also describes the trend in related publications on the concept. Future studies could significantly benefit from the findings of the present paper.

The outcomes of this study can assist researchers in better comprehending and summarising the key drivers of FinTech. In addition, the findings can help new researchers identify the starting point for their research on FinTech.

As far as the authors are aware, this is the first study that reviews FinTech publications derived from Scopus from 2008 to 2022. Hence, it is a pioneering study into FinTech bibliometric analysis, providing an understanding of the structural knowledge by reviewing the timeline of academic progression in FinTech.

This paper aims to understand how a special library helped firefighters in Illinois navigate the digital revolution by evidencing the elements and forms of work that made its innovative services possible.

The authors examine the history of a special library through a community informatics lens, drawing from sociomaterial perspectives to highlight forms of work often invisible in digital innovation. Data was collected through documentary revision, oral histories and semi-structured interviews. Deductive-inductive coding and constant comparative analysis was used in the analysis.

A historical narrative of the library between 1990 and 2021 highlights three sociotechnical innovations that assisted firefighters through the digital revolution: the facilitated collection, the co-created collection and the inside-out library. To develop these innovations the library drew from institutional relations, personal relations, grants, labor, knowledge of firefighters and technology. Various forms of articulation work brought these elements together to create innovative services.

The role of special libraries in addressing the digital divide has not been sufficiently detailed so far; this paper is a contribution in that direction. It also has practical value for professionals working in specialized libraries and information centers.