Search results

This study aims to propose novel edge device-tailored federated learning algorithms of local classifiers (stochastic gradient descent, support vector machines), namely, FL-lSGD and FL-lSVM. These algorithms are designed to address the challenge of large-scale ImageNet classification.

The authors’ FL-lSGD and FL-lSVM trains in a parallel and incremental manner to build an ensemble local classifier on Raspberry Pis without requiring data exchange. The algorithms load small data blocks of the local training subset stored on the Raspberry Pi sequentially to train the local classifiers. The data block is split into k partitions using the k-means algorithm, and models are trained in parallel on each data partition to enable local data classification.

Empirical test results on the ImageNet data set show that the authors’ FL-lSGD and FL-lSVM algorithms with 4 Raspberry Pis (Quad core Cortex-A72, ARM v8, 64-bit SoC @ 1.5GHz, 4GB RAM) are faster than the state-of-the-art LIBLINEAR algorithm run on a PC (Intel(R) Core i7-4790 CPU, 3.6 GHz, 4 cores, 32GB RAM).

Efficiently addressing the challenge of large-scale ImageNet classification, the authors’ novel federated learning algorithms of local classifiers have been tailored to work on the Raspberry Pi. These algorithms can handle 1,281,167 images and 1,000 classes effectively.

Binary classification on imbalanced data is a challenge; due to the imbalance of the classes, the minority class is easily masked by the majority class. However, most existing classifiers are better at identifying the majority class, thereby ignoring the minority class, which leads to classifier degradation. To address this, this paper proposes a twin-support vector machines for binary classification on imbalanced data.

In the proposed method, the authors construct two support vector machines to focus on majority classes and minority classes, respectively. In order to promote the learning ability of the two support vector machines, a new kernel is derived for them.

(1) A novel twin-support vector machine is proposed for binary classification on imbalanced data, and new kernels are derived. (2) For imbalanced data, the complexity of data distribution has negative effects on classification results; however, advanced classification results can be gained and desired boundaries are learned by using optimizing kernels. (3) Classifiers based on twin architectures have more advantages than those based on single architecture for binary classification on imbalanced data.

For imbalanced data, the complexity of data distribution has negative effects on classification results; however, advanced classification results can be gained and desired boundaries are learned through using optimizing kernels.

This study aims to investigate the current state of research using deep learning methods for text classification in the tourism and hospitality field and to propose specific guidelines for future research.

This study undertakes a qualitative and critical review of studies that use deep learning methods for text classification in research fields of tourism and hospitality and computer science. The data was collected from the Web of Science database and included studies published until February 2022.

Findings show that current research has mainly focused on text feature classification, text rating classification and text sentiment classification. Most of the deep learning methods used are relatively old, proposed in the 20th century, including feed-forward neural networks and artificial neural networks, among others. Deep learning algorithms proposed in recent years in the field of computer science with better classification performance have not been introduced to tourism and hospitality for large-scale dissemination and use. In addition, most of the data the studies used were from publicly available rating data sets; only two studies manually annotated data collected from online tourism websites.

The applications of deep learning algorithms and data in the tourism and hospitality field are discussed, laying the foundation for future text mining research. The findings also hold implications for managers regarding the use of deep learning in tourism and hospitality. Researchers and practitioners can use methodological frameworks and recommendations proposed in this study to perform more effective classifications such as for quality assessment or service feature extraction purposes.

The paper provides an integrative review of research in text classification using deep learning methods in the tourism and hospitality field, points out newer deep learning methods that are suitable for classification and identifies how to develop different annotated data sets applicable to the field. Furthermore, foundations and directions for future text classification research are set.

Taking into consideration the current human need for agricultural produce such as rice that requires water for growth, the optimal consumption of this valuable liquid is important. Unfortunately, the traditional use of water by humans for agricultural purposes contradicts the concept of optimal consumption. Therefore, designing and implementing a mechanized irrigation system is of the highest importance. This system includes hardware equipment such as liquid altimeter sensors, valves and pumps which have a failure phenomenon as an integral part, causing faults in the system. Naturally, these faults occur at probable time intervals, and the probability function with exponential distribution is used to simulate this interval. Thus, before the implementation of such high-cost systems, its evaluation is essential during the design phase.

The proposed approach included two main steps: offline and online. The offline phase included the simulation of the studied system (i.e. the irrigation system of paddy fields) and the acquisition of a data set for training machine learning algorithms such as decision trees to detect, locate (classification) and evaluate faults. In the online phase, C5.0 decision trees trained in the offline phase were used on a stream of data generated by the system.

The proposed approach is a comprehensive online component-oriented method, which is a combination of supervised machine learning methods to investigate system faults. Each of these methods is considered a component determined by the dimensions and complexity of the case study (to discover, classify and evaluate fault tolerance). These components are placed together in the form of a process framework so that the appropriate method for each component is obtained based on comparison with other machine learning methods. As a result, depending on the conditions under study, the most efficient method is selected in the components. Before the system implementation phase, its reliability is checked by evaluating the predicted faults (in the system design phase). Therefore, this approach avoids the construction of a high-risk system. Compared to existing methods, the proposed approach is more comprehensive and has greater flexibility.

By expanding the dimensions of the problem, the model verification space grows exponentially using automata.

Unlike the existing methods that only examine one or two aspects of fault analysis such as fault detection, classification and fault-tolerance evaluation, this paper proposes a comprehensive process-oriented approach that investigates all three aspects of fault analysis concurrently.

This paper aims to propose a classification method for steel strip surface defects based on a mixed attention mechanism to achieve fast and accurate classification performance. The traditional method of classifying surface defects of hot-rolled steel strips has the problems of low recognition accuracy and low efficiency in the industrial complex production environment.

The authors selected min–max scaling comparison method to filter the training results of multiple network models on the steel strip surface defect data set. Then, the best comprehensive performance model EfficientNet-B0 was refined. Based on this, the authors proposed two mixed attention addition methods, which include squeeze-excitation spatial mixed module and multilayer mixed attention mechanism (MMAM) module, respectively.

With these two methods, the authors achieved 96.72% and 97.70% recognition accuracy on the steel strip data set after data augmentation for adapting to the complex production environment, respectively. Using the transfer learning method, the EfficientNet-B0 based on MMAM obtained 100% recognition accuracy.

This study not only focuses on improving the recognition accuracy of the network model itself but also considers other performance indicators of the network, which are rarely considered by many researchers. The authors further improve the intelligent production technique and address this issue. Both methods proposed in this paper can be applied to embedded equipment, which can effectively improve steel strip factory production efficiency and reduce material and time loss.

Ubiquitous health-care monitoring systems can provide continuous surveillance to a person using various sensors, including wearables and implantable and fabric-woven sensors. By assessing the state of many physiological characteristics of the patient’s body, continuous monitoring can assist in preparing for the impending emergency. To address this issue, this study aims to propose a health-care system that integrates the treatment of the impending heart, stress and alcohol emergencies. For this purpose, this study uses readings from sensors used for electrocardiography, heart rate, respiration rate, blood alcohol content percentage and blood pressure of a patient’s body.

For heart status, stress level and alcohol detection, the parametric values obtained from these sensors are preprocessed and further divided into four, five and six phases, respectively. A final integrated emergency stage is derived from the stages that were interpreted to examine at a person’s state of emergency. A thorough analysis of the proposed model is carried out using four classification techniques, including decision trees, support vector machines, k nearest neighbors and ensemble classifiers. For all of the aforementioned detections, four metrics are used to evaluate performance: classification accuracy, precision, recall and fmeasure.

Eventually, results are validated against the existing health-care systems. The empirical results received reveal that the proposed model outperforms the existing health-care models in the context of metrics above for different detections taken into consideration.

This study proposes a health-care system capable of performing data processing using wearable sensors. It is of great importance for real-time systems. This study assures the originality of the proposed system.

This paper aims to elaborate on current research on fourth party logistics “4PL” by offering a taxonomy that provides a deeper understanding of 4PL service offerings, thus drawing clear frontiers between existing 4PL business models.

The authors collected data using semi-structured interviews conducted with 60 logistics executives working in 44 “4PL” providers located in France. Using automatic analysis of textual data, the authors combined spatial visualisation, clustering analysis and hierarchical descending classification to generate the taxonomy.

Two key dimensions emerged, allowing the authors to clearly identify and distinguish four 4PL business models: the level of reliance on interpersonal relationships and the level of involvement in 4PL service offering. As a result, 4PL providers fall under one of the following business models in the taxonomy: (1) The Metronome, (2) The Architect, (3) The Nostalgic and (4) The Minimalist.

The study focuses on investigating 4PL providers located in France; thus, future studies should explore the classification of 4PL business models across different cultural contexts and social structures.

The findings offer valuable managerial insights for logistics executives and clients of 4PL to better orient their needs, the negotiations and the contracting process with 4PLs.

Using a Lexicometric analysis, the authors develop taxonomy of 4PL service providers based on empirical evidence from logistics executives; the work addresses the existing confusion regarding the conceptualisation of 4PL firms with other types of logistical providers and the role of in/formal interpersonal relationships in the logistical intermediation.

The sustainable development goals (SDGs) are introduced to guide achieving the sustainable goals and tackle the global problems. United Nations members may perform activities to achieve the predetermined goals and report on their SDG activities. The comprehension and commitment of several stakeholders are essential for the effective implementation of the SDGs. Countries encourage their stakeholders to perform and report their activities to meet the SDGs. The purpose of this study is to investigate the extent to which corporations’ annual reports address the SDGs to assess and comprehend their level of commitment to, priority of and integration of SDGs within their reporting structure. This research makes it easier to evaluate corporations’ sustainability performance and contributions to global sustainability goals by looking at the extent to which they address the SDGs.

In the study, it is revealed to what extent the reports meet the SDGs with the multilabel text classification approach. The SDG classification is carried out by examining the report with the help of a text analysis tool based on an enhanced version of gradient boosting. The implementation of a machine learning-based model allowed it to determine which SDGs are associated with the company’s operations without the requirement for the report’s authors to perform so. Therefore, instead of reading the texts to seek for “SDG” evidence as typically occurs in the literature, SDG proof was searched in relevant texts.

To show the feasibility of the study, the annual reports of the leading companies in Turkey are examined, and the results are interpreted. The study produced results including insights into the sustainable practices of businesses, priority SDG selection, benchmarking and business comparison, gaps and improvement opportunities identification and representation of the SDGs’ importance.

The findings of the analysis of annual reports indicate which SDGs they are concerned about. A gap in the literature can be noticed in the analysis of annual reports of companies that fall under a particular framework. In addition, it has sparked the idea of conducting research on a global scale and in a time series. With the aid of this research, decision-making procedures can be guided, and advancements toward the SDGs can be achieved.

The purpose of this paper is to compare the effectiveness of the various text mining techniques that can be used to classify maintenance work-order records into their respective failure modes, focussing on the choice of algorithm and preprocessing transforms. Three algorithms are evaluated, namely Bernoulli Naïve Bayes, multinomial Naïve Bayes and support vector machines.

The paper has both a theoretical and experimental component. In the literature review, the various algorithms and preprocessing techniques used in text classification is considered from three perspectives: the domain-specific maintenance literature, the broader short-form literature and the general text classification literature. The experimental component consists of a 5 × 2 nested cross-validation with an inner optimisation loop performed using a randomised search procedure.

From the literature review, the aspects most affected by short document length are identified as the feature representation scheme, higher-order n-grams, document length normalisation, stemming, stop-word removal and algorithm selection. However, from the experimental analysis, the selection of preprocessing transforms seemed more dependent on the particular algorithm than on short document length. Multinomial Naïve Bayes performs marginally better than the other algorithms, but overall, the performances of the optimised models are comparable.

This work highlights the importance of model optimisation, including the selection of preprocessing transforms. Not only did the optimisation improve the performance of all the algorithms substantially, but it also affects model comparisons, with multinomial Naïve Bayes going from the worst to the best performing algorithm.

With the increasing number of Web services, correct and efficient classification of Web services is crucial to improve the efficiency of service discovery. However, existing Web service classification approaches ignore the class overlap in Web services, resulting in poor accuracy of classification in practice. This paper aims to provide an approach to address this issue.

This paper proposes a label confusion and priori correction-based Web service classification approach. First, functional semantic representations of Web services descriptions are obtained based on BERT. Then, the ability of the model is enhanced to recognize and classify overlapping instances by using label confusion learning techniques; Finally, the predictive results are corrected based on the label prior distribution to further improve service classification effectiveness.

Experiments based on the ProgrammableWeb data set show that the proposed model demonstrates 4.3%, 3.2% and 1% improvement in Macro-F1 value compared to the ServeNet-BERT, BERT-DPCNN and CARL-NET, respectively.

This paper proposes a Web service classification approach for the overlapping categories of Web services and improve the accuracy of Web services classification.