Search results
1 – 10 of 332Chun‐Fei Hsu, Shuen‐Liang Wang, Ming‐Chia Li and Chih‐Min Lin
The DC‐DC converters which convert one level of electrical voltage to the desired level are widely used in many electrical peripherals. During the past two decade, many different…
Abstract
Purpose
The DC‐DC converters which convert one level of electrical voltage to the desired level are widely used in many electrical peripherals. During the past two decade, many different control laws have been developed. The proportional‐integral (PI) control and sliding‐mode control have been carried out for the DC‐DC converters since they are simple to implement and easy to design. However, its performance using PI control and sliding‐mode control is obviously quite limited. The purpose of this paper is to a self‐tuning nonlinear function control (STNFC) propose for the DC‐DC converters. The adaptation laws of the proposed STNFC system are derived in the sense of Lyapunov function, thus not only the controller parameters can be online tuned itself, but also the system's stability can be guaranteed.
Design/methodology/approach
In general, the accurate mathematical models of the DC‐DC converters are difficult to derive. This paper proposes a model‐free STNFC design method. Since the proposed STNFC uses a simple fuzzy system with three fuzzy rules base to implement the control law, the computational loading of the fuzzy inference mechanism is slight. So the proposed STNFC system is suitable for the real‐time practical applications. The controller parameters of the proposed STNFC system can online tune in the Lyapunov sense, thus the stability of closed‐loop system can be guaranteed.
Findings
The proposed STNFC system is applied to a DC‐DC converter based on a field‐programmable gate array chip. The experimental results are provided to demonstrate the proposed STNFC system can cope with the input voltage and load resistance variations to ensure the stability while providing fast transient response.
Originality/value
The proposed STNFC approach is interesting for the design of an intelligent control scheme. The main contributions of this paper are: the successful development of STNFC system without heavy computational loading. The parameter‐learning algorithm is design based on the Lyapunov stability theorem to guarantee the system stability; the successful applications of the STNFC system to control the forward DC‐DC converter. And, the proposed STNFC methodology can be easily extended to other DC‐DC converters.
Details
Keywords
Chan‐Soo Lee, Ho‐Yong Choi, Yeong‐Seuk Kim and Nam‐Soo Kim
The purpose of this paper is to present a fully integrated power converter. A stacked spiral inductor is applied in a voltage‐mode CMOS DC‐DC converter for the chip…
Abstract
Purpose
The purpose of this paper is to present a fully integrated power converter. A stacked spiral inductor is applied in a voltage‐mode CMOS DC‐DC converter for the chip miniaturization and low‐power operation.
Design/methodology/approach
The three‐layer spiral inductor is simulated with an equivalent circuit and applied to the DC‐DC converter. The DC‐DC buck converter has been fabricated with a standard 0.35 μm CMOS process. The power converter is measured in both experiment and simulation in terms of frequency and electrical characteristics.
Findings
Experimental results show that the converter with the stacked spiral inductor operates properly with the inductance of 7.6 nH and mW power range. The measured inductance of the stacked spiral inductor is found to be almost half of the circuit designed value because of the parasitic resistances and capacitances in the spiral inductor.
Originality/value
This paper first introduces the application of the integrated stacked spiral inductor in DC‐DC buck converter for display driver circuit, which requires a low‐power operation. It also shows the fully integrated DC‐DC converter for chip miniaturization.
Details
Keywords
Mohsen Karimi, Mohammad Pichan, Adib Abrishamifar and Mehdi Fazeli
This paper aims to propose a novel integrated control method (ICM) for high-power-density non-inverting interleaved buck-boost DC-DC converter. To achieve high power conversion by…
Abstract
Purpose
This paper aims to propose a novel integrated control method (ICM) for high-power-density non-inverting interleaved buck-boost DC-DC converter. To achieve high power conversion by conventional single phase DC-DC converter, inductor value must be increased. This converter is not suitable for industrial and high-power applications as large inductor value will increase the inductor current ripple. Thus, two-phase non-inverting interleaved buck-boost DC-DC converter is proposed.
Design/methodology/approach
The proposed ICM approach is based on the theory of integrated dynamic modeling of continuous conduction mode (CCM), discontinuous conduction mode and synchronizing parallel operation mode. In addition, it involves the output voltage controller with inner current loop (inductor current controller) to make a fair balancing between two stages. To ensure fast transient performance, proposed digital ICM is implemented based on a TMS320F28335 digital signal microprocessor.
Findings
The results verify the effectiveness of the proposed ICM algorithm to achieve high voltage regulating (under 0.01 per cent), very low inductor current ripple (for boost is 1.96 per cent, for buck is 1.1) and fair input current balance between two stages (unbalancing current less than 0.5A).
Originality/value
The proposed new ICM design procedure is developed satisfactorily to ensure fast transient response even under high load variation and the solving R right-half-plane HP zeros of the CCM. In addition, the proposed method can equally divide the input current of stages and stable different parallel operation modes with large input voltage variations.
Details
Keywords
Rajamohana Kuselan and Venkatesan Sundharajan
This study aims to extend the driving range by on-board charging with use of photovoltaic (PV) source, avoiding the dependency on the grid supply and energy storage system in…
Abstract
Purpose
This study aims to extend the driving range by on-board charging with use of photovoltaic (PV) source, avoiding the dependency on the grid supply and energy storage system in addition to that reduce the conversion complexity influenced on converter section of electric vehicle (EV) system.
Design/methodology/approach
This paper proposed a PV fed integrated converter topology called integrated single-input multi-output (I-SIMO) converter with enriched error tolerant fuzzy logic controller (EET-FLC) based control technique to regulate the speed of brushless direct current motor drive. I-SIMO converter provides both direct current (DC) and alternating current (AC) outputs from a single DC input source depending on the operation mode. It comprises two modes of operation, act as DC–DC converter in vehicle standby mode and DC–AC converter in vehicles driving mode.
Findings
The use of PV panels in the vehicle helps to reduce dependence of grid supply as well as vehicle’s batteries. The proposed topology has to remove the multiple power conversion stages in EV system, reduce components count and provide dual outputs for enhancement of performance of EV system.
Originality/value
The proposed topology leads to reduction of switching losses and stresses across the components of the converter and provides reduction in system complexity and overall expenditure. So, it enhances the converter reliability and also improves the efficiency. The converter provides ripple-free output voltage under dynamic load condition. The performance of EET-FLC is studied by taking various performance measures such as rise time, peak time, settling time and peak overshoot and compared with conventional control designs.
Details
Keywords
Phanindra Thota, Amarendra Reddy Bhimavarapu and V.V.S. Bhaskara Reddy Chintapalli
This study aims to propose a new non-isolated Multi-Input Zeta-SEPIC (MIZS) dc–dc converter for renewable energy sources integration with different voltage levels (low-voltage…
Abstract
Purpose
This study aims to propose a new non-isolated Multi-Input Zeta-SEPIC (MIZS) dc–dc converter for renewable energy sources integration with different voltage levels (low-voltage source, high-voltage source). The chosen configuration of the converter is capable of performing bucking as well as boosting operations in various modes of operation.
Design/methodology/approach
Parameters of the selected MIZS converter are designed using the time-domain analysis. The selected converter belongs to the sixth-order family with two switches and six energy storage elements. State-space model of the converter is developed for each mode of operation, and using these individual state-space models, an average state-space model of the converter useful to carry out detailed analysis for different operating conditions is developed. Analysis related to operational stability of the converter is also carried out using Participation Factor (PaF)-based Eigen value analysis.
Findings
Using the PaF-based Eigen analysis, participation of the various state variables in different Eigen modes and vice versa is carried out. Performance of the converter for different parameter variations in the allowable range is determined and the same has been used to find the operational stability of the converter under different modes of operation. The selected converter has low inductor ripple currents and output voltage ripples when delivering the power to load.
Originality/value
Because operational stability of the converter under various operating conditions is one of the key performance indicators for selecting a particular type of converter, PaF-based Eigen value analysis has been carried out using the average state-space model developed for the selected MIZS converter. Operational stability analysis of the converter is carried out for parameter variations also. In addition, participation of the various states in each Eigen mode and vice versa have been analyzed for designed parameter values and also variation within the specified range of variations.
Details
Keywords
Milad Malekzadeh, Alireza Khosravi and Mehdi Tavan
In actual application of a DC-DC boost converter, the input voltage and resistive load may be changed frequently, and these variations deteriorate the conventional controller…
Abstract
Purpose
In actual application of a DC-DC boost converter, the input voltage and resistive load may be changed frequently, and these variations deteriorate the conventional controller performance. The purpose of this paper is to present an observer-based control scheme for a DC-DC boost converter with an unknown resistive load and input voltage.
Design/methodology/approach
To estimate the unknown input voltage and resistive load, a nonlinear observer is designed by using the Lyapunov stability theorem. In addition, the closed-loop stability of the proposed control scheme for the DC-DC boost converter is proven. To convert the continuous control input to discrete mode, a sigma–delta modulator is used.
Findings
The proposed control scheme is validated in different situations. The adaptive structure of the proposed control scheme is tested by the input voltage, load and reference signal variation, and the simulation results confirm the capability of the proposed observer-based control strategy.
Originality/value
The contribution of this paper is twofold: according to nonlinear controller design, the feedforward term of the nonlinear controller is obtained via the observer, and unlike the proportional–integral controller, performance deterioration in the input voltage and load variations are unraveled. The effectiveness of this method is validated by experimental implementation in the presence of load and input voltage variations, and the experimental results confirm the efficacy of the proposed strategy.
Details
Keywords
Fiaz Ahmad, Akhtar Rasool, Esref Emre Ozsoy, Asif Sabanoviç and Meltem Elitas
This paper aims to propose a robust cascaded controller based on proportional-integral (PI) and continuous sliding mode control.
Abstract
Purpose
This paper aims to propose a robust cascaded controller based on proportional-integral (PI) and continuous sliding mode control.
Design/methodology/approach
Cascaded control structure is an attractive control scheme for DC-DC power converters. It has a two-loop structure where the outer loop contains PI controller and the inner loop uses sliding mode control (SMC). This structure thus combines the merits of both the control schemes. However, there are some issues that have prohibited its adoption in industry, the discontinuous nature of SMC which leads to variable switching frequency operation and is hard to realize practically. This paper attempts to overcome this issue by changing the discontinuous functionality of SMC to continuous by utilizing the concept of equivalent control.
Findings
The robustness of the controller designed is verified by considering various cases, namely, ideal case with no uncertainties, sudden variation of input supply voltage, load resistance, reference voltage, circuit-parameters and for noise disturbance. The controller effectiveness is validated by simulating the DC-DC boost and Cuk converters in SimPowerSystems toolbox of MATLAB/Simulink. It is shown that the performance of the proposed controller is satisfactory, and both reference output voltage and inductor current are tracked with little or no sensitivity to disturbances.
Originality/value
The results for various scenarios are interesting and show that the controller works quite satisfactorily for all the simulated uncertainties.
Details
Keywords
A DC-DC converter plays a major role in many applications such as fuel cell, hybrid electric vehicle, renewable energy system, etc. Among these converters, the bidirectional DC-DC…
Abstract
Purpose
A DC-DC converter plays a major role in many applications such as fuel cell, hybrid electric vehicle, renewable energy system, etc. Among these converters, the bidirectional DC-DC fly-back converters are more attractive because of their simple structure and easy control. However, the power devices present in this converter are subjected to high-voltage stresses due to the leakage inductor energy of the transformer. In order to recycle the leakage inductor energy and to minimise the voltage stress on the power devices, the purpose of this paper is to focus on the transformer less bidirectional DC-DC converter with high efficiency.
Design/methodology/approach
In order to reduce the switching loss, a few passive elements are added. The auxiliary circuit consists of a resonant inductor and resonant capacitors. This auxiliary circuit affords zero voltage switching function and cancels out the ripple component present in the main inductor current irrespective of the power flow direction.
Findings
In this work three topologies of bidirectional converters for BLDC motor are investigated and are compared in terms of mechanical power output and THD.
Originality/value
The paper presents enhanced versions of the converters.
Details
Keywords
Venkateswaran M., Govindaraju C. and Santhosh T.K.
Power converters are an integral part of the energy conversion process in solar photovoltaic (PV) systems which is used to match the solar PV generation with the load…
Abstract
Purpose
Power converters are an integral part of the energy conversion process in solar photovoltaic (PV) systems which is used to match the solar PV generation with the load requirements. The increased penetration of renewable invokes intermittency in the generated power affecting the reliability and continuous energy supply of such converters. DC-DC converters deployed in solar PV systems impose stringent restrictions on supplied power, continuous operation and fault prediction scenarios by continuously observing state variables to ensure continuous operation of the converter.
Design/methodology/approach
A converter deployed for a mission-critical application has to ensure continuous regulated output for which the converter has to ensure fault-free operation. The fault diagnostic algorithm relies on the measurement of a state variable to assess the type of fault. In the same line, a predictive controller depends on the measurement of a state variable to predict the control variable of a converter system to regulate the converter output around a fixed or a variable reference. Consequently, both the fault diagnosis and the predictive control algorithms depend on the measurement of a state variable. Once measured, the available data can be used for both algorithms interchangeably.
Findings
The objective of this work is to integrate the fault diagnostic and the predictive control algorithms while sharing the measurement requirements of both these control algorithms. The integrated algorithms thus proposed could be applied to any converter with a single inductor in its energy buffer stage.
Originality/value
laboratory prototype is created to verify the feasibility of the integrated predictive control and fault diagnosis algorithm. As the proposed method combine the fault detection algorithm along with predictive control, a load step variation and manual fault creation methods are used to verify the feasibility of the converter as with the simulation analysis. The value for the capacitors and inductors were chosen based on the charge-second and volt-second balance equations obtained from the steady-state analysis of boost converter.
Details
Keywords
Saravanan R., Vijayshankar S., Sathyaseelan and Suresh K.
This paper aims to propose Hidden Converter (H-Converter) combined with dual port 3Ø inverter for energy storage application to produce wide range of voltage. Some of the…
Abstract
Purpose
This paper aims to propose Hidden Converter (H-Converter) combined with dual port 3Ø inverter for energy storage application to produce wide range of voltage. Some of the application required wide range of voltages, but problem from E-chopper is either boost or buck mode of operations, both modes are not possible. To overcome this drawback, H-Converter is combined with dual port 3Ø inverter controlled by carrier-based pulse width modulation (CB-PWM) technique is added with zero sequence injection.
Design/methodology/approach
Hidden converter is a bidirectional DC-DC chopper used to convert fixed DC to variable DC and vice versa in both buck and boost modes of operations. Dual port inverter is combined with hidden DC-DC converter can produce wide range of voltages.
Findings
The bidirectional DC-AC converter requires less power for processing and consumes less power losses by using modest carrier built- pulse width modulation scheme through proposed zero structure addition.
Originality/value
By using this proposed strategy H-Converter can produce wide range of voltage in both the sides and mostly power is processed in the 3Ø inverter with a one stage conversion with less power loss. As a result, with one stage power conversion has more efficiency because of less power loss. This proposed converter has designed by analysis, and the real time result is tested in an experiment.
Details