Search results
1 – 10 of over 150000Hong-Chuong Tran, Yu-Lung Lo, Trong-Nhan Le, Alan Kin-Tak Lau and Hong-You Lin
Depending on an experimental approach to find optimal parameters for producing fully dense (relative density > 99%) Inconel 718 (IN718) components in the selective laser melting…
Abstract
Purpose
Depending on an experimental approach to find optimal parameters for producing fully dense (relative density > 99%) Inconel 718 (IN718) components in the selective laser melting (SLM) process is expensive and offers no guarantee of success. Accordingly, this study aims to propose a multi-scale simulation framework to guide the choice of processing parameters in a more pragmatic manner.
Design/methodology/approach
In the proposed approach, a powder layer, ray tracing and heat transfer simulation models are used to calculate the melt pool dimensions and evaporation volume corresponding to a small number of laser power and scanning speed conditions within the input design space. A layer-heating model is then used to determine the inter-layer idle time required to maximize the temperature convergence rate of the solidified layer beneath the power bed. The simulation results are used to train surrogate models to construct SLM process maps for 3,600 pairs of the laser power and scanning speed within the input design space given three different values of the underlying solidified layer temperature (i.e., 353 K, 673 K and 873 K). The ideal selection of laser power and scanning speed of each process map is chosen based on four quality-related criteria listed as follows: without the appearance of key-hole melting; an evaporation volume less than the volume of the d90 powder particles; ensuring the stability of single scan tracks; and avoiding a weak contact between the melt pool and substrate. Finally, the optimal laser power and scanning speed parameters for the SLM process are determined by superimposing the optimal regions of the individual process maps.
Findings
The feasibility of the proposed approach is demonstrated by fabricating IN718 test specimens using the optimal processing conditions identified by the simulation framework. It is shown that the maximum density of the fabricated parts is 99.94%, while the average density is 99.88% and the standard deviation is less than 0.05%.
Originality/value
The present study proposed a multi-scale simulation model which can efficiently predict the optimal processing conditions for producing fully dense components in the SLM process. If the geometry of the three-dimensional printed part is changed or the machine and powder material is altered, users can use the proposed method for predicting the processing conditions that can produce the high-density part.
Details
Keywords
A systems perspective of waste management allows an integratedapproach not only to the five basic functional elements of wastemanagement itself (generation, reduction, collection…
Abstract
A systems perspective of waste management allows an integrated approach not only to the five basic functional elements of waste management itself (generation, reduction, collection, recycling, disposal), but to the problems arising at the interfaces with the management of energy, nature conservation, environmental protection, economic factors like unemployment and productivity, etc. This monograph separately describes present practices and the problems to be solved in each of the functional areas of waste management and at the important interfaces. Strategies for more efficient control are then proposed from a systems perspective. Systematic and objective means of solving problems become possible leading to optimal management and a positive contribution to economic development, not least through resource conservation. India is the particular context within which waste generation and management are discussed. In considering waste disposal techniques, special attention is given to sewage and radioactive wastes.
Details
Keywords
This study empirically aims to examine the relation between CEO power and firm engagement in corporate social responsibility (CSR). It undertakes an in-depth analysis of how the…
Abstract
Purpose
This study empirically aims to examine the relation between CEO power and firm engagement in corporate social responsibility (CSR). It undertakes an in-depth analysis of how the structural, ownership and expert dimensions of CEO power affect individual dimensions of CSR.
Design/methodology/approach
This study uses ordinary least squares and industry fixed-effects regressions. It also uses instrumental variable-generalized method of moment regressions to test the robustness of empirical results.
Findings
Results indicate that CEO power is negatively related to CSR. However, the relation between CEO power and CSR is influenced by CSR strengths, as power is negatively related to CSR strengths and is not related to CSR concerns. Results also indicate that the structural and ownership dimensions of CEO power are negatively related to CSR, and the expert dimension has no significant effect on CSR. Moreover, results show that CEO power is not related to the product dimension of CSR performance.
Research limitations/implications
CEO power is measured using the structural, ownership and expert dimensions of power. However, CEOs also acquire power through social networks and connections outside the corporation which is not covered in this study.
Originality/value
This study uses comprehensive measures of CEO power and CSR. It is the first study that examines the effect of dimensions of CEO power on individual dimensions of CSR performance.
Details
Keywords
Massimo Contrafatto, John Ferguson, David Power, Lorna Stevenson and David Collison
The purpose of this paper is to provide a theoretically informed analysis of a struggle for power over the regulation of corporate social responsibility (CSR) and social and…
Abstract
Purpose
The purpose of this paper is to provide a theoretically informed analysis of a struggle for power over the regulation of corporate social responsibility (CSR) and social and environmental accounting and reporting (SEAR) within the European Union.
Design/methodology/approach
The paper combines insights from institutional theory (Lawrence and Buchanan, 2017) with Vaara et al.’s (2006) and Vaara and Tienar’s (2008) discursive strategies approach in order to interrogate the dynamics of the institutional “arena” that emerged in 2001, following the European Commission’s publication of a Green Paper (GP) on CSR policy and reporting. Drawing on multiple sources of data (including newspaper coverage, semi-structured interviews and written submissions by companies and NGOs), the authors analyse the institutional political strategies employed by companies and NGOs – two of the key stakeholder groupings who sought to influence the dynamics and outcome of the European initiative.
Findings
The results show that the 2001 GP was a “triggering event” (Hoffman, 1999) that led to the formation of the institutional arena that centred on whether CSR policy and reporting should be voluntary or mandatory. The findings highlight how two separate, but related forms of power (systemic and episodic power) were exercised much more effectively by companies compared to NGOs. The analysis of the power initiatives and discursive strategies deployed in the arena provides a theoretically informed understanding of the ways in which companies acted in concert to reach their objective of maintaining CSR and SEAR as a voluntary activity.
Originality/value
The theoretical framework outlined in the paper highlights how the analysis of CSR and SEAR regulation can be enriched by examining the deployment of episodic and systemic power by relevant actors.
Details
Keywords
D. Naveen Kilari, A. Hema Sekhar, N. Sudhakar Reddy and N.P. Dharani
This paper aims to provide a permanent magnet synchronous generator (PMSG) wind turbine, which feeds electric power (AC) to the power grid. The converter, located on the machine…
Abstract
Purpose
This paper aims to provide a permanent magnet synchronous generator (PMSG) wind turbine, which feeds electric power (AC) to the power grid. The converter, located on the machine side, is used to produce the full amount of wind power. Research on wind energy conversion system (WECS) is carried out in this study using a direct wind turbine in MATLAB with constant and variable speeds.
Design/methodology/approach
This paper is about WECS using PMSG and is connected to a grid of two serial converters with common DC connections.
Findings
This paper aims to provide the value of DC connection voltage at its base, regardless of the wind speed alterations, the inverter's output ac voltage can be kept constant.
Originality/value
This paper aims to provide a Hill Climb Search maximum power point tracking (MPPT) algorithm is an effective control system for extracting maximum energy, also called voltage control, pitch control, phase-locked loop (PLL) controls, from a wind turbine. Using the Fuzzy controller, the grid side converter is controlled.
Details
Keywords
James Michael and Wagner College
Attempts to transfer Western management theories without considering the host's cultural value system is a prescription for failure. While conceptual frameworks for understanding…
Abstract
Attempts to transfer Western management theories without considering the host's cultural value system is a prescription for failure. While conceptual frameworks for understanding cultural differences exist, such as the ones developed by Hofstede and Hall, we know little about which managerial practices are relevant in what cultural settings. Adopting the view that the effectiveness of different management behaviors depends on the culture in which they are practiced, this paper develops various propositions that match specific managerial behaviors with cultural work values. The matching of managerial behaviors with cultural values has a wide range of applications in overseas selection decisions and training programs.
Boussad Abbes, Tahar Anedaf, Fazilay Abbes and Yuming Li
Direct energy deposition (DED) is an additive manufacturing process that allows to produce metal parts with complex shapes. DED process depends on several parameters, including…
Abstract
Purpose
Direct energy deposition (DED) is an additive manufacturing process that allows to produce metal parts with complex shapes. DED process depends on several parameters, including laser power, deposition rate and powder feeding rate. It is important to control the manufacturing process to study the influence of the operating parameters on the final characteristics of these parts and to optimize them. Computational modeling helps engineers to address these challenges. This paper aims to establish a framework for the development, verification and application of meshless methods and surrogate models to the DED process.
Design/methodology/approach
Finite pointset method (FPM) is used to solve conservation equations involved in the DED process. A surrogate model is then established for the DED process using design of experiments with powder feeding rate, laser power and scanning speed as input parameters. The surrogate model is constructed using neutral networks (NN) approximations for the prediction of maximum temperature, clad angle and dilution.
Findings
The simulations of thin wall built of Ti-6Al-4V titanium alloy clearly demonstrated that FPM simulation is successful in predicting temperature distribution for different process conditions and compare favorably with experimental results from the literature. A methodology has been developed for obtaining a surrogate model for DED process.
Originality/value
This methodology shows how to achieve realistic simulations of DED process and how to construct a surrogate model for further use in optimization loop.
Details
Keywords
Yaakov Weber and David M. Schweiger
This paper proposes an anthropology‐based theoretical model describing the impact of top management culture clash on the commitment of the acquired team to the new organization…
Abstract
This paper proposes an anthropology‐based theoretical model describing the impact of top management culture clash on the commitment of the acquired team to the new organization and on its cooperation with the acquiring team. It suggests that three factors are influential, namely the degree of cultural differences, the nature of the contact between the teams, and the intended level of integration between the companies. The paper generates numerous propositions for predicting the impact of the culture clash. It also offers suggestions for further theoretical and empirical study, and presents some of the model's practical implications.
Bartolomé Dey´‐Tortella, Luis R. Gomez‐Mejía, Julio O. de Castro and Robert M. Wiseman
Agency theoretic models have been used in the past to justify the use of stock options as an effective incentive alignment mechanism to create a common fate between principals and…
Abstract
Agency theoretic models have been used in the past to justify the use of stock options as an effective incentive alignment mechanism to create a common fate between principals and agents. In this paper, we use behavioral theory to reach the opposite conclusion – namely, that the design characteristics of the typical stock option plan foster perverse incentives for loss‐averse agents, leading to decisions with detrimental consequences for principals. We also consider alternative stock option designs and other equity‐based executive compensation plans and argue that they may suffer from the same problems as traditional stock option plans – namely, that loss‐averse executives will try to protect the endowed value of that equity through self‐serving decisions that do not enhance shareholder wealth.
Details
Keywords
Approaching anti-essentialism from the perspective of multiculturalism this article reexamines the value of tolerance in dealing with inter-cultural conflicts and in facilitation…
Abstract
Approaching anti-essentialism from the perspective of multiculturalism this article reexamines the value of tolerance in dealing with inter-cultural conflicts and in facilitation of multicultural discourses. It asserts that tolerance can be a potentially useful practice in specific local contexts, but it is not an ideal in itself. The article questions the role of public administration in building tolerance for cultural diversity and argues that providing visible forms of public recognition of cultural practices could be one possible role for government agencies.