Search results

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.

Introduction Corrosion inhibitors are used during pickling, oil‐well acidification and in other process industries to control corrosion and hydrogen absorption by steels. The suitability of an inhibitor is judged by measuring the corrosion rate and by the hydrogen absorbed by the material during the operation in the presence of inhibitors. It is generally believed that the efficacy of an inhibitor in controlling hydrogen absorption increases with its increase in corrosion mitigatory properties. This principle is true for the inhibitors which function by uniform film formation but fails in the case of poisons such as compounds of As, S, P and Sb, which strongly polarize the recombination step of the hydrogen evolution reaction on metal surfaces:

A historical analysis of Sikhism demonstrates that Sikh thinking on ethical management has long predated academic thinking and research pertaining to this subject. It also demonstrates the relationship between good management and peace. Sikhism with its relatively secular orientation promoted both profits by working and the peaceful society that was necessary to obtain these. Hence the concept of ‘Sikh Peace management’ became a reality. Its foundation is the idea that working and management for the common good acts as a spiritual experience and that it interacts with and reinforces a peaceful environment. Despite its similarities with Calvin’s work ethics Sikhism did not lead to religious warfare like in 16th and 17th century Europe. It did result however in ‘defensive’ characteristics, which, just like work, became part of a new spirituality.

Drawn from the push–pull perspective, this research aims to identify the determinants of Chinese technology's outward foreign direct investments (OFDI) into the Eurasian region.

The authors argue that contrary to the extant literature, technology-driven OFDI from emerging-market multinationals (EMNEs) do not always seek developed countries, and EMNEs' technology investments in emerging economies are rising indicating that there are factors in these economies that can prove attractive. The authors recognize the influence of the macroeconomic environment and the interaction of home and host-country institutional contexts that influence the location choice of EMNEs technology-driven OFDI into other emerging economies, mediated by the industry sector and firm's ownership structure. The authors test our hypotheses using a sample of 1,656 observations of Chinese MNEs' tech-investments in the Eurasian region from 2005 to 2019.

The study results indicate that bilateral diplomatic relations pave the way of the host-country institutional environment for Chinese MNEs uncovering the role of the Chinese government as an OFDI facilitator. This study also unveils a lower technology level of the Chinese MNEs' investments in the Eurasian region connoting an interest in market opportunities exploitation through their existing technologies – through its comparative advantage in the global markets – rather than strategic assets acquisition aiming at augmenting their technological capabilities. This trend is similar to that of other major foreign direct investment (FDI) source countries.

This research contributes to a better understanding of the characteristics and the location choice of technology investments from EMNEs into other emerging economies that have received scant attention in the literature. In addition, it extends the institutional theory by analyzing how home-country institutions, through bilateral diplomatic relations, may smooth the host country institutional environment for home-country MNEs' foreign investments and contributes as well to the debate on the applicability of the existing theoretical framework in the case of emerging-market MNEs.

Pyridine and some of its derivatives have been evaluated as inhibitors for the corrosion of API‐45 steel in NACE sour solution. Amongst the various methyl and halogen substituted pyridine compounds, 2,4,6‐trimethyl pyridine is found to afford maximum protection followed by 2,6‐dimethyl pyridine, >2,4‐dimethyl pyridine, >3‐bromopyridine, >2‐methyl pyridine, 4‐methyl pyridine, 3,5‐dimethyl pyridine, >2 and 3‐chloropyridine>pyridine. These results have been discussed in the light of availability of the electron densities with the nitrogen atom of the pyridine ring. The inhibitive periormance of all the inhibitors is found to deteriorate with increase in temperature from 30 to 60°C and with passage of time. The values of heat of absorption and free energy of absorption indicates that the inhibitors have a chemical type of absorption at the metal/electrolyte interface. Polarization diagrams and shift in open circuit potential in the presence of inhibitors indicate that these compounds retard the cathodic as well as anodic reaction process.

Workplace voice is well-established and encompasses behaviors such as prosocial voice, informal complaints, grievance filing, and whistleblowing, and it focuses on interactions between the employee and supervisor or the employee and the organizational collective. In contrast, our chapter focuses on employee prosocial advocacy voice (PAV), which the authors define as prosocial voice behaviors aimed at preventing harm or promoting constructive changes by advocating on behalf of others. In the context of a healthcare organization, low quality and unsafe patient care are salient and objectionable states in which voice can motivate actions on behalf of the patient to improve information exchanges, governance, and outreach activities for safer outcomes. The authors draw from the theory and research on responsibility to intersect with theories on information processing, accountability, and stakeholders that operate through voice between the employee-patient, employee-coworker, and employee-profession, respectively, to propose a model of PAV in patient-centered healthcare. The authors complete the model by suggesting intervening influences and barriers to PAV that may affect patient-centered outcomes.

This paper aims to attempt to examine the effect of firm-customer exchange characteristics, frequency and specificity, on the likelihood of the firm to generate customer-driven innovation. The authors draw from social capital theory and argue that repetitive and customer-specific exchange improves the trusts between firm and customers, which in turn ease the flows of tacit knowledge from customers to the firm. From the perspective of customer knowledge management, the authors contribute by examining the mechanism by which a firm can acquire knowledge from and about customers. The authors further argue that a firm’s ability to absorb knowledge from customers and turn them into innovation also depends on its internal capability. A firm that consistently upgrades its capacity is more likely to generate customer-driven innovation than those that do not. Also, the authors argue that the joint effect of exchange characteristics and internal capability upgrading can further increase the likelihood of customer-driven innovation. Such a joint force implies the positive moderating effect of internal capability upgrading to the relationship between exchange characteristics and customer-driven innovation.

The authors test the hypotheses on 3,000 firms from six countries in Latin America. They take advantage of the 2017 World Bank Enterprises Survey. This most recent of the survey asks questions on various types of innovation and firm-customers exchange characteristics and other firm-level variables.

The authors find support for our hypotheses that repeated exchange and exchanges tailored to specific customers have a positive effect on customer-driven innovation. Also, they find the support that internal capability upgrading, in the form of investment in product design, marketing and organizational development has a positive effect on customer-driven innovation. The authors also find that investment in product design positively moderates the impact of exchange characteristics on the likelihood of customer-driven innovation.

While past studies focus on strategies to acquire and manage customers’ knowledge, little has been said about how exchange attributes can encourage or discourage innovation? This question is important because various theoretical perspectives may have a different prediction on the effect of firm-customer relationship and innovation. This study attempts to bridge such theoretical tension.

The paper develops a model for enhancing R&D productivity for Indian public funded laboratories. The paper utilizes the productivity data of five Council of Scientific and Industrial Research (CSIR) laboratories for analysis and to form the constructs of the model.

The weighted average method was employed for analyzing the rankings of survey respondents pertaining to the significant measures enhancing R&D involvement of researchers and significant non-R&D jobs. The authors have proposed a model of productivity. Various individual, organizational and environmental constructs related to the researchers working in the CSIR laboratories have been outlined that can enhance R&D productivity of researchers in Indian R&D laboratories. Partial Least Squares-Structural Equation Modeling (PLS-SEM) was used to find the predictability of the productivity model.

The organizational factors have a crucial role in enhancing the R&D outputs of CSIR laboratories. The R&D productivity of researchers can be improved through implementing the constructs of the proposed model of productivity.

The R&D productivity model can be adapted by the R&D laboratories to enhance researchers’ R&D involvement, increased R&D outputs and achieving self-sustenance in long run.

The R&D laboratories can initiate exercises to explore the most relevant factors and measures to enhance R&D productivity of their researchers. The constructs of the model can function as a guideline to introduce the most preferable research policies in the laboratory for overall mutual growth of laboratory and the researchers.

Hardly any studies have been found that have focused on finding the measures of enhancing R&D involvement of researchers and the influence of significant time-intensive jobs on researchers’ productivity.