Search results

3D printing has been warmly welcomed by clothing enterprises for its customization capacity in recent years. However, such clothing enterprises have to face the digital transformation challenges brought by 3D printing. Since the business model is a competitive weapon for modern enterprises, there is a research gap between business model innovation and digital transformation challenges for 3D-printing garment enterprises. The aim of the paper is to innovate a new business model for 3D-printing garment enterprises in digital transformation.

A business model innovation canvas (BMIC), a new method for business model innovation, is used to innovate a new 3D-printing clothing enterprises business model in the context of digital transformation. The business model canvas (BMC) method is adopted to illustrate the new business model. The business model ecosystem is used to design the operating architecture and mechanism of the new business model.

First, 3D-printing clothing enterprises are facing digital transformation, and they urgently need to innovate new business models. Second, mass customization and distributed manufacturing are important ways of solving the business model problems faced by 3D-printing clothing enterprises in the process of digital transformation. Third, BMIC has proven to be an effective tool for business model innovation.

The new mass deep customization-distributed manufacturing (MDC-DM) business model is universal. As such, it can provide an important theoretical reference for other scholars to study similar problems. The digital transformation background is taken into account in the process of business model innovation. Therefore, this is the first hybrid research that has been focused on 3D printing, garment enterprises, digital transformation and business model innovation. On the other hand, business model innovation is a type of exploratory research, which means that the MDC-DM business model’s application effect cannot be immediately observed and requires further verification in the future.

The new business model MDC-DM is not only applicable to 3D-printing garment enterprises but also to some other enterprises that are either using or will use 3D printing to enhance their core competitiveness.

A new business model, MDC-DM, is created through BMIC, which allows 3D-printing garment enterprises to meet the challenges of digital transformation. In addition, the original canvas of the MDC-DM business model is designed using BMC. Moreover, the ecosystem of the MDC-DM business model is constructed, and its operation mechanisms are comprehensively designed.

This study aims to investigate the relationship between prevention and panic of COVID-19 and distress tolerance, happiness and emotional intelligence (EI) in undergraduate and postgraduate accounting students in Iraq. In other words, this study seeks to answer whether or not different types of prevention and fear of COVID-19 can lead to improved distress tolerance, happiness and EI.

The study’s statistical population comprises 298 undergraduate and 138 postgraduate students in Iraq who were selected as the sample size using the Cochran sampling method. In this study, partial least squares regression (PLS) have been used to investigate the effect of independent variables on the dependent variable.

The results showed a positive and significant relationship between COVID-19 prevention and distress tolerance and happiness, but no significant relationship was observed between COVID-19 prevention and EI. Also, no significant relationship was observed between fear of COVID-19 and distress tolerance and happiness, but there was a positive and significant relationship between fear of COVID-19 and EI.

The present study’s results can provide valuable information to everyone and help the development of science and knowledge because so far, and to the best of the authors’ knowledge, no research has examined the impact of prevention and panic of COVID-19 on distress tolerance, happiness and EI in students.

The consolidation process and morphology evolution in ceramics-based additive manufacturing (AM) are still not well-understood. As a way to better understand the ceramic selective laser sintering (SLS), a dynamic three-dimensional computational model was developed to forecast thermal behavior of hydroxyapatite (HA) bioceramic.

AM has revolutionized automotive, biomedical and aerospace industries, among many others. AM provides design and geometric freedom, rapid product customization and manufacturing flexibility through its layer-by-layer technique. However, a very limited number of materials are printable because of rapid melting and solidification hysteresis. Melting-solidification dynamics in powder bed fusion are usually correlated with welding, often ignoring the intrinsic properties of the laser irradiation; unsurprisingly, the printable materials are mostly the well-known weldable materials.

The consolidation mechanism of HA was identified during its processing in a ceramic SLS device, then the effect of the laser energy density was studied to see how it affects the processing window. Premature sintering and sintering regimes were revealed and elaborated in detail. The full consolidation beyond sintering was also revealed along with its interaction to baseplate.

These findings provide important insight into the consolidation mechanism of HA ceramics, which will be the cornerstone for extending the range of materials in laser powder bed fusion of ceramics.

Digital transformation is essential for commercial banks to maintain long-term competitiveness in the digital economy era. This study aims to investigate the relationship between inside debt and the bank's digital transformation.

This study set up a quasi-natural experiment based on implementing the executive compensation deferral system in the Chinese banking industry. Using the annual panel data of 180 commercial banks in China from 2007 to 2021, this study employed the difference-in-differences (DID) method to conduct an empirical analysis.

This study confirms a significant statistical relationship between inside debt and the bank's digital transformation, and managerial myopia is the transmission channel of inside debt affecting the bank's digital transformation. Furthermore, the development of Internet finance and the enhancement of bankers' confidence will improve the contributions of inside debt to the bank's digital transformation.

This study contributes to the literature on inside debt and the bank's digital transformation. It has specific policy value for the scientific design of the banking compensation mechanism and accelerating banks' digital transformation.

Three-dimensional (3D) printing is popular for many applications including the production of photocatalysts. This paper aims to focus on developing of 3D-printed photocatalyst-nano composite lattice structure. Digital light processing (DLP) 3D printing of photocatalyst composites was performed using photosensitive resin mixed with 0.5% Wt. of TiO₂ powder and varying amounts (0.025% Wt. to 0.2% Wt.) of graphene nanoplatelet powder. The photocatalytic efficiency of DLP 3D-printed photocatalyst TiO₂ composite was investigated, and the effects of nano graphite powder incorporation on the photocatalytic activity, thermal and mechanical properties were investigated.

Methods involve 3D computer-aided design modeling, printing parameters and comprehensive characterization techniques such as structural equation modeling, X-ray diffraction, thermogravimetric analysis, Fourier-transform infrared (FTIR) and mechanical testing.

Results highlight successful dispersion and characteristics of TiO₂ and graphene nanoplatelet (GNP) powders, intricate designs of 3D-printed lattice structures, and the influence of GNPs on thermal behavior and mechanical properties.

The study suggests applicability in wastewater treatment and environmental remediation, showcasing the adaptability of 3 D printing in designing effective photocatalysts. Future research should focus on practical applications and the long-term durability of these 3D-printed composites.

The use of waste polyethylene terephthalate (PET) plastics derived from shredded bottles in concrete is not formalized yet, especially in reinforced members such as beams and columns. The disposal of plastic wastes in concrete is a viable alternative to manage those wastes while minimizing the environmental impacts associated to recycling, carbon dioxide emissions and energy consumption.

This paper evaluates the suitability of 2D deterministic and stochastic finite element (FE) modeling to predict the shear strength behavior of reinforced concrete (RC) beams without stirrups. Different concrete mixtures prepared with 1.5%–4.5% PET additions, by volume, are investigated.

Test results showed that the deterministic and stochastic FE approaches are accurate to assess the maximum load of RC beams at failure and corresponding midspan deflection. However, the crack patterns observed experimentally during the different stages of loading can only be reproduced using the stochastic FE approach. This later method accounts for the concrete heterogeneity due to PET additions, allowing a statistical simulation of the effect of mechanical properties (i.e. compressive strength, tensile strength and Young’s modulus) on the output FE parameters.

Data presented in this paper can be of interest to civil and structural engineers, aiming to predict the failure mechanisms of RC beams containing plastic wastes, while minimizing the experimental time and resources needed to estimate the variability effect of concrete properties on the performance of such structures.

Under the background of open science, this paper integrates altmetrics data and combines multiple evaluation methods to analyze and evaluate the indicators' characteristics of discourse leading for academic journals, which is of great significance to enrich and improve the evaluation theory and indicator system of academic journals.

This paper obtained 795,631 citations and 10.3 million altmetrics indicators data for 126,424 published papers from 151 medicine, general and internal academic journals. In this paper, descriptive statistical analysis and distribution rules of evaluation indicators are first carried out at the macro level. The distribution characteristics of evaluation indicators under different international collaboration conditions are analyzed at the micro level. Second, according to the characteristics and connotation of the evaluation indicators, the evaluation indicator system is constructed. Third, correlation analysis, factor analysis, entropy weight method and TOPSIS method are adopted to evaluate and analyze the discourse leading in medicine, general and internal academic journals by integrating altmetrics. At the same time, this paper verifies the reliability of the evaluation results.

Six features of discourse leading integrated with altmetrics indicators are obtained. In the era of open science, online academic exchanges are becoming more and more popular. The evaluation activities based on altmetrics have fine-grained and procedural advantages. It is feasible and necessary to integrate altmetrics indicators and combine the advantages of multiple methods to evaluate the academic journals' discourse leading of which are in a diversified academic ecosystem.

This paper uses descriptive statistical analysis to analyze the distribution characteristics and distribution rules of discourse leading indicators of academic journals and to explore the availability of altmetrics indicators and the effectiveness of constructing an evaluation system. Then, combining the advantages of multiple evaluation methods, The author integrates altmetrics indicators to comprehensively evaluate the discourse leading of academic journals and verify the reliability of the evaluation results. This paper aims to provide references for enriching and improving the evaluation theory and indicator system of academic journals.

Speckle noise removal in ultrasound images is one of the important tasks in biomedical-imaging applications. Many filtering -based despeckling methods are discussed in many existing works. Two-dimensional (2-D) transforms are also used enormously for the reduction of speckle noise in ultrasound medical images. In recent years, many soft computing-based intelligent techniques have been applied to noise removal and segmentation techniques. However, there is a requirement to improve the accuracy of despeckling using hybrid approaches.

The work focuses on double-bank anatomy with framelet transform combined with Gaussian filter (GF) and also consists of a fuzzy kind of clustering approach for despeckling ultrasound medical images. The presented transform efficiently rejects the speckle noise based on the gray scale relative thresholding where the directional filter group (DFB) preserves the edge information.

The proposed approach is evaluated by different performance indicators such as the mean square error (MSE), peak signal to noise ratio (PSNR) speckle suppression index (SSI), mean structural similarity and the edge preservation index (EPI) accordingly. It is found that the proposed methodology is superior in terms of all the above performance indicators.

Fuzzy kind clustering methods have been proved to be better than the conventional threshold methods for noise dismissal. The algorithm gives a reconcilable development as compared to other modern speckle reduction procedures, as it preserves the geometric features even after the noise dismissal.

The purpose of this review paper is to provide a review of the most recent advances in the field of manufacturing composite sandwich panels along with their advantages and limitations. The other purpose of this paper is to familiarize the researchers with the available developments in manufacturing sandwich structures.

The most recent research articles in the field of manufacturing various composite sandwich structures were reviewed. The review process started by categorizing the available sandwich manufacturing techniques into nine main categories according to the method of production and the equipment used. The review is followed by outlining some automatic production concepts toward composite sandwich automated manufacturing. A brief summary of the sandwich manufacturing techniques is given at the end of this article, with recommendations for future work.

It has been found that several composite sandwich manufacturing techniques were proposed in the literature. The diversity of the manufacturing techniques arises from the variety of the materials as well as the configurations of the final product. Additive manufacturing techniques represent the most recent trend in composite sandwich manufacturing.

This work is valuable for all researchers in the field of composite sandwich structures to keep up with the most recent advancements in this field. Furthermore, this review paper can be considered as a guideline for researchers who are intended to perform further research on composite sandwich structures.

The present study investigates a nexus between digital public services (DPS) and international tourism empirically.

This article analyzes the nexus of DPS and international tourism by using the international sample of 23 European countries in the span of nearly 10 years from 2011 to 2019. Various econometric techniques, including the panel-corrected standard error (PCSE) model and the feasible generalized least squares (FGLS) model, are employed to confirm the author’s findings. Furthermore, the autoregressive distributed lag (ARDL) method is applied to measure the short- and long-run effects of DPS on international tourism developments.

Tourism is positively influenced by digitalization, implying that the enhancement of digital public service usage results in the development of the tourism industry. However, when looking at the effect of DPS in the short term, a negative impact can be found on tourism, as the density reported in the previous analysis stated a negative response to the tourism density. This effect spans the course of several facets, such as international tourism arrivals, international tourism receipt, international tourism, receipts (% of total exports) and global tourism expenditure (% of total imports). Although the result is unfavorable in the short term, digitalization promises great prospects for tourism in the long term. Notably, an improvement in economic growth, financial development as well a reduction in the pervasiveness of corruption and an improvement of environmental quality are transmission channels through which DPS have favorable influences on tourism activities.

The author’s findings are vital for managers and policymakers to establish a comprehensive grasp of digitalization's role in deciding tourist adoption. This is because digitalization has been proven to play a role in determining tourism adoption.

The present study is the first to examine the relationship between DPS and international tourism empirically. The author is also the first to distinguish the effects of digitalization in the short and long run.