Search results

This study aims to measure the global research landscape of the National Institute of Pharmaceutical Education and Research (NIPER) of India on a set of quantitative and qualitative metrics in terms of research output toward exploring research trends and give an overview of collaborative practices by researchers of NIPERs.

The present study has selected the Scopus database as a tool to retrieve potential publications of studied NIPERs during the last 12 years (2010–2021). NIPER-Mohali, NIPER-Hyderabad, NIPER-Ahmedabad, NIPER-Guwahati and NIPER-Kolkata have been selected for the study. The study has adopted a comprehensive search strategy to extract 3,926 publications data. VOS viewer 1.6.17, BibExcel and Microsoft Excel were used for data analysis and visualization.

The global scientific research output of NIPERs accrued 3,926 publications with an average of 327 publications per year. The retrieved publications fetched a total of 67,772 citations with an average citation impact of 17.26. There observed a steady growth of publications from 168 to 509 registered with an average growth rate of 18.44%. The mean relative growth rate and doubling time of research output are 0.26 and 2.94. The authorship patterns explore collaborative trends as most of the publications were published by multiple authors (99.39%). NIPERs have expanded their outreach to collaborate with the USA, Malaysia, Saudi Arabia, Australia and the UK to collaborate on research and regulatory reforms exhibits in the USA as a major contributor.

The present study is the first effort to evaluate the global research productivity of NIPERs and assess the current research trends on a set of quantitative and qualitative metrics to provide some insights into the complex dynamics of research productivity. The study’s outcome may help to identify the current research progress of NIPERs at the global level.

This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).

PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.

Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.

This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.

This paper aims to investigate the influence of post-curing temperature, post-curing time and gamma ray irradiation dose upon the tensile and compressive mechanical properties of the medical graded vat photopolymerization parts.

Medical graded vat photopolymerization specimens, made from photopolymer resin, were fabricated using bottom-up vat photopolymerization machine. Tensile and compressive tests were conducted to assess the mechanical properties. The specimens were categorized into uncured and post-curing groups. Temperature post-processing and/or gamma irradiation exposure were for post-curing specimens. The post-curing parameters considered included temperature levels of 50°C, 60°C and 70°C, with 1, 2, 3 and 4 h periods. For the gamma irradiation, the exposure doses were 25, 50, 75 and 100 kGy.

Post-curing improved the mechanical properties of medical graded vat photopolymerization parts for both tensile and compressive specimens. Post-curing temperature greater than 50°C or a prolonged post-curing period of more than 1 h made insignificant changes or deterioration in mechanical properties. The optimal post-curing condition was therefore a 50°C post-curing temperature with 1 h post-curing time. Exposure to gamma ray improved the compressive mechanical properties, but deteriorated tensile mechanical properties. Higher gamma irradiation doses could decrease the mechanical properties and also make the part more brittle, especially for doses more than 25 kGy.

The obtained results would be beneficial to the medical device manufacturer who fabricated the invasive temporary contact personalized surgical instruments by vat photopolymerization technique. In addition, it also raised awareness in excessive gamma sterilization in the medical graded vat photopolymerization parts.

This study aims to focus on the surface mount technology (SMT) mass production process of Sn-9Zn-2.5Bi-1.5In solder. It explores it with some components that will provide theoretical support for the industrial SMT application of Sn-Zn solder.

This study evaluates the properties of solder pastes and selects a more appropriate reflow parameter by comparing the microstructure of solder joints with different reflow soldering profile parameters. The aim is to provide an economical and reliable process for SMT production in the industry.

Solder paste wettability and solder ball testing in a nitrogen environment with an oxygen content of 3,000 ppm meet the requirements of industrial production. The printing performance of the solder paste is good and can achieve a printing rate of 100–160 mm/s. When soldering with a traditional stepped reflow soldering profile, air bubbles are generated on the surface of the solder joint, and there are many voids and defects in the solder joint. A linear reflow soldering profile reduces the residence time below the melting point of the solder paste (approximately 110 s). This reduces the time the zinc is oxidized, reducing solder joint defects. The joint strength of tin-zinc joints soldered with the optimized reflow parameters is close to that of Sn-58Bi and SAC305, with high joint strength.

This study attempts to industrialize the application of Sn-Zn solder and solves the problem that Sn-Zn solder paste is prone to be oxidized in the application and obtains the SMT process parameters suitable for Sn-9Zn-2.5Bi-1.5In solder.

Bisphosphonate (BP) medications can be applied to prohibit the damage of bone density and the remedy of bone illnesses such as osteoporosis. As the metal chelating of phosphonate groups are nearby large with six O atoms possessing the high negative charge, these compounds are active toward producing the chelated complexes through drug design method. BP agents have attracted much attention for the clinical treatment of some skeletal diseases depicted by enhancing of osteoclast-mediated bone resorption.

In this work, it has been accomplished the CAM-B3LYP/6–311+G(d, p)/LANL2DZ to estimate the susceptibility of SWCNT for adsorbing alendronate, ibandronate, neridronate and pamidronate chelated to two metal cations of 2Mg²⁺, 2Ca²⁺, 2Sr²⁺ through nuclear magnetic resonance and thermodynamic parameters. Therefore, the data has explained that the feasibility of using SWCNT and BP agents becomes the norm in metal chelating of drug delivery system which has been selected through alendronate → 2X, ibandronate → 2X, neridronate → 2X and pamidronate → 2X (X = Mg²⁺/Ca²⁺/Sr²⁺) complexes.

The thermodynamic results have exhibited that the substitution of 2Ca²⁺ cation by 2Sr²⁺ cation in the structure of bioactive glasses can be efficient for treating vertebral complex fractures. However, it has been observed the most fluctuation in the Gibbs free energy for BPs → 2Sr²⁺ at 300 K. Furthermore, Monte Carlo simulation has resulted by increasing the dielectric constant in the aqueous medium can enhance the stability and efficiency of BP drugs for preventing the loss of bone density and treating the osteoporosis.

According to this research, by incorporation of chelated 2Mg²⁺, 2Ca²⁺ and 2Sr²⁺ cations to BP drugs adsorbed onto (5, 5) armchair SWCNT, the network compaction would increase owing to the larger atomic radius of Sr²⁺ cation rather than Ca²⁺ and Mg²⁺, respectively.

In the developing field of nano-materials synthesis, copper oxide nanoparticles (NPs) are deemed to be one of the most significant transition metal oxides because of their intriguing characteristics. Its synthesis employing green chemistry principles has become a key source for next-generation antibiotics attributed to its features such as environmental friendliness, ease of use and affordability. Because they are more environmentally benign, plants have been employed to create metallic NPs. These plant extracts serve as capping, stabilising or hydrolytic agents and enable a regulated synthesis as well.

Organic chemical solvents are harmful and entail intense conditions during nanoparticle synthesis. The copper oxide NPs (CuO-NPs) synthesised by employing the green chemistry principle showed potential antitumor properties. Green synthesised CuO-NPs are regarded to be a strong contender for applications in the pharmacological, biomedical and environmental fields.

The aim of this study is to evaluate the anticancer potential of CuO-NPs plant extracts to isolate and characterise the active anticancer principles as well as to yield more effective, affordable, and safer cancer therapies.

This review article highlights the copper oxide nanoparticle's biomedical applications such as anticancer, antimicrobial, dental and drug delivery properties, future research perspectives and direction are also discussed.

This study aims to highlight that security and flexibilities remain the main points of contention in the cordiality business. This research points to planning a framework that empowers hotel users to get to the room using a mobile access key. Advancing secured facilities, mobile phone “Near Field Communication” (NFC) innovation as the entrance device by carrying out an application containing an imitated mobile key for explicit verification access is used.

The proposed system is evaluated by triangulation of experimental, numerical and rational evaluation using partial least square structural equation modeling (PLS-SEM) with Malaysian hotel guests and employees.

The discoveries with the hypothesis supported validated that the suggested solution can eliminate physical cards, boost protection and encourage a contactless ecosystem. Theoretical, management and societal contributions are discussed here.

This experiment comes with the constraints that it was conducted in only two hotels and does not fully reflect the choices of a wider range of travellers. Secondly, the cost of existing NFC smart locks is still relatively high, and along with the development of technology, the price will decrease when supply exceeds demand.

To promote high-security attributes, NFC technology as the access system by implementing an application containing an emulated smart key for specific authentication access is used. The host-card emulation enables cost-effectiveness profit and initiating a defence system in the pandemic era.

To promote high-security attributes, NFC technology is used as the access system by implementing an application containing an emulated smart key for specific authentication access. The host-card emulation enables cost-effectiveness profit and initiating a defence system in the pandemic era.

The novelty of this study comes from the use of commonly available smartphone NFC features that are yet to be applied in the tourism ecosystem. The research provokes the applied concept of mobile smartkeys.

This study aims to characterize the properties of natural cellulose fiber from the pseudo-stems of the curcuma zedoaria plant.

The fiber was extracted using the biological retting process (cold-water retting). The intrinsic fiber properties obtained were used to evaluate the possibility of using fiber for textile applications.

The average length of a curcuma zedoaria fiber was 34.77 cm with a fineness value of 6.72 Tex. A bundle of curcuma zedoaria fibers was comprised of many elementary fibers. Curcuma zedoaria had an irregular cross-section, with the lumen having a varied oval shape. Curcuma zedoaria fibers had tenacity and elongation value of 3.32 gf/denier and 6.95%, respectively. Curcuma zedoaria fibers had a coefficient of friction value of 0.46. Curcuma zedoaria fibers belong to a hygroscopic fiber type with a moisture regain value of 10.29%.

Extraction and Characterization of Curcuma zedoaria Pseudo-stems Fibers for Textile Application.

This study aims to investigate the effect of spray drying temperature and maltodextrin addition on the contents of phenolics, flavonoids, anthocyanins and antioxidant activities (2,2-diphenyl-1-picrylhydrazyl [DPPH] radical scavenging activity, ferric reducing antioxidant power and reducing power) of karonda powder.

Over the past few decades, the demands for application of natural colorants in food production have been attracting the attention of academic research and food industry. Anthocyanins, a red pigment commonly found on plants, show high potentials in the preparation of spray-dried pigment powder. This study, therefore, was conducted using full factorial design with two factors, namely, inlet temperature (150°C and 160°C) and soluble solid concentration (10, 15 and 20°Brix) with maltodextrin as carrier to produce pigment powder from karonda, an anthocyanin-rich fruit which is native to southeast Asia.

Increasing soluble solid content from 10 to 15°Brix resulted in a 42%–57% reduction in phenolic, flavonoid and anthocyanin contents. However, when increasing the amount of maltodextrin from 15 to 20°Brix, a lower reduction (approximately 11%–19%) was observed. In samples with the same °Brix, there was no significant variation in antioxidant contents and activities, especially at high maltodextrin ratios. In addition, the reducing power of samples dried at higher temperature (160°C) was higher than that of samples dried at lower temperature. Karonda spray-dried powder showed a good positive correlation (p < 0.01) between antioxidant contents and DPPH• activity.

To the best of the authors’ knowledge, in this study, for the first time, the effect of spray drying conditions on the quality of karonda powder was investigated.

This paper aims to synthesize new screen-printing ink formula based on new derivatives of azo thiadiazol disperse dyes and evaluate their characteristics after being printed on polyester fabric substrates.

New dispersed dyes based on 1, 3, 4-Thiadiazole derivatives (dyes 1 and 2) were prepared and confirmed by different analyses, infrared (IR), mass and nuclear magnetic resonance (NMR) spectroscopy, and then formulated as colored materials in the screen-printing ink formulations. Printing pastes containing the prepared dyestuffs and other ingredients were used for printing polyester using screen-printing or traditional printing. The characteristics of printed polyester fabric substrates were measured by color measurements such as a*, b*, L*, C*, E, Ho, R% and color strength, as well as light, washing, crock and alkali perspiration fastness, and finally, the depth of penetration was evaluated.

The prepared 1, 3, 4-Thiadiazole derivatives (dyes 1 and 2) were obtained from the reaction of 5,5’-(1,4-phenylene)bis(1,3,4-Thiadiazole-2-amine) with resorcinol and m-toluidine as a coupling component. The suitability of the prepared dyestuffs for silk screen-printing on polyester fabrics has been investigated. The prints obtained from a formulation containing dye 1 possess high color strength as well as good overall fastness properties if compared to those obtained using dye 2.

The method of synthesis of the new dyestuffs and screen-printing ink provides a simple and practical solution to prepare some new heterocyclic disperse azo dyes, and they are formulated in the screen-printing inks for printing on a polyester fabric substrate.

The prepared disperse dyes based on 1,3,4-Thiadiazole derivatives (dyes 1 and 2) could be used in textile printing of polyester on an industrial scale.