Search results

The contact and lubrication performances, which were previously estimated assuming a Gaussian surface, are insufficient due to the non-Gaussian surface characteristics of the honing liner. The purpose of this study is to analyze the liner honing surface and examine its effects on the contact and flow performance.

The fast Fourier transform (FFT) method was used to generate the liner honing texture. Subsequently, an elastoplastic contact model based on boundary element theory was constructed and simulated for the honing surface. The results were compared with those obtained using a Gaussian surface. In addition, flow factors of the honing surfaces were also compared.

The contact pressure and flow factors demonstrate significant disparities when dealing with non-Gaussian surfaces. In the deterministic model, the pressure exhibits considerably diminished magnitudes and a more evenly distribution. Moreover, when the gap between surfaces is narrow, the discrepancy in flow factor across different directions on the real honing surface becomes more prominent compared with the Gaussian surface.

The model incorporates the influence of the non-Gaussian honing surface, thereby enabling more accurate prediction.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2023-0198/

This study aims to improve the tribological properties of hydrodynamic journal bearing via surface texture, as well as the wear and antifriction mechanisms of textured bearing were represented. It provides a design direction for solving the tribological problem of rotor-bearing system.

In this paper, the variation of surface texture parameters (e.g. texture diameter, d; area density, sp; and depth, hp) were analyzed based on finite difference method. The optimal surface texture parameters were obtained by designing orthogonal experiments, and the relationship between friction and wear properties and microstructure was studied via combining electron probe microanalyzer, scanning electron microscope, X-ray diffractometer and friction and wear testing machine.

Dimensionless film pressure P increased as the d increased, whereas P first increased and then decreased as the sp and hp increased, and the maximum P was got as sp = 15% and hp = 25 µm, respectively. The friction coefficient of textured surface with suitable parameters was effectively reduced and the textured surface with the best antifriction effect was 5#. Orthogonal experimental design analysis showed that the influence order of factors on friction coefficient was as follows: sp > sp × d > d > d × hp > hp > sp × hp and the friction coefficient first decreased and then increased as the sp, d and hp increased. In addition, the friction and wear mechanism of textured bearing were three body friction and abrasive wear as the matrix structure and hard phase were a single β phase and Mn5Si3, respectively. While the antifriction mechanism of textured surface was able to store abrasive particles and secondary hydrodynamic lubrication was formed.

The sample with reasonable texture parameter design can effectively reduce friction and wear of hydrodynamic journal bearing without reducing the service life, which can provide a reference for improving the lubrication performance and mechanical efficiency of rotor-bearing system.

The purpose of this study is to design and process the optimal V-shaped microstructure for 7075 aluminum alloy and reveal its wear resistance mechanism and performance.

The hydrodynamic pressure lubrication models of the nontextured, V-shaped, circular and square microtextures are established. The corresponding oil film pressure distributions are explored. The friction and wear experiments are conducted on a rotating device. The effects of the microstructure shapes and sizes on the wear mechanisms are investigated via the friction coefficients and surface morphologies.

In comparison, the V-shaped microtexture has the largest oil film carrying capacity and the lowest friction coefficient. The wear mechanism of the V-shaped microtexture is dominated by abrasive and adhesive wear. The V-shaped microtexture has excellent wear resistance under a side length of 300 µm, an interval of 300 µm and a depth of 20 µm.

This study is conductive to the design of wear-resistant surfaces for friction components.