Search results
1 – 3 of 3Aamir Hassan and Javed Ahmad Bhat
Concrete-filled double skin tube (CFDST) columns are considered one of the most effective steel-concrete composite sections owing to the higher load carrying capacity as compared…
Abstract
Purpose
Concrete-filled double skin tube (CFDST) columns are considered one of the most effective steel-concrete composite sections owing to the higher load carrying capacity as compared to its counterpart concrete-filled tube (CFT) columns. This paper aims to numerically investigate the performance of axially loaded, circular CFDST short columns, with the innovative strengthening technique of providing stiffeners in outer tubes. Circular steel hollow sections have been adopted for inner as well as outer tubes, while varying the length of rectangular steel stiffeners, fixed inside the outer tubes only, to check the effect of stiffeners in partially and full-length stiffened CFDST columns.
Design/methodology/approach
The behaviour of these CFDST columns is investigated numerically by using a verified finite element analysis (FEA) model from the ABAQUS. The behaviour of 20-unstiffened, 80-partially stiffened and 20-full-length stiffened CFDST columns is studied, while varying the strength of steel (fyo = 250–750 MPa) and concrete (30–90 MPa).
Findings
The FEA results are verified by comparing them with the previous test results. FEA study has exhibited that, there is a 7%–25% and 39%–49% increase in peak-loads in partially stiffened and full-length stiffened CFDST columns, respectively, compared to unstiffened CFDST columns.
Originality/value
Enhanced strength has been observed in partially stiffened and full-length stiffened CFDST columns as compared to unstiffened CFDST columns. Also, a significant effect of strength of concrete has not been observed as compared to the strength of steel.
Haichao Wang, Xiaoqiang Liu, Zhanjiang Li, Li Chen, Pinqiang Dai and Qunhua Tang
The purpose of this paper is to study the high temperature oxidation behavior of Ti and C-added FeCoCrNiMn high entropy alloys (HEAs).
Abstract
Purpose
The purpose of this paper is to study the high temperature oxidation behavior of Ti and C-added FeCoCrNiMn high entropy alloys (HEAs).
Design/methodology/approach
Cyclic oxidation method was used to obtain the oxidation kinetic profile and oxidation rate. The microstructures of the surface and cross section of the samples after oxidation were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM).
Findings
The results show that the microstructure of the alloy mainly consisted of FCC (Face-centered Cubic Structure) main phase and carbides (M7C3, M23C6 and TiC). With the increase of Ti and C content, the microhardness, strength and oxidation resistance of the alloy were effectively improved. After oxidation at a constant temperature of 800 °C for 100 h, the preferential oxidation of chromium in the chromium carbide determined the early formation of dense chromium oxide layers compared to the HEAs substrate, resulting in the optimal oxidation resistance of the TC30 alloy.
Originality/value
More precipitated CrC can preferentially oxidize and rapidly form a dense Cr2O3 layer early in the oxidation, which will slow down the further oxidation of the alloy.
Details
Keywords
Italo Cesidio Fantozzi, Sebastiano Di Luozzo and Massimiliano Maria Schiraldi
The purpose of the study is to identify the soft skills and abilities that are crucial to success in the fields of operations management (OM) and supply chain management (SCM)…
Abstract
Purpose
The purpose of the study is to identify the soft skills and abilities that are crucial to success in the fields of operations management (OM) and supply chain management (SCM), using the O*NET database and the classification of a set of professional figures integrating values for task skills and abilities needed to operate successfully in these professions.
Design/methodology/approach
The study used the O*NET database to identify the soft skills and abilities required for success in OM and SCM industries. Correlation analysis was conducted to determine the tasks required for the job roles and their characteristics in terms of abilities and soft skills. ANOVA analysis was used to validate the findings. The study aims to help companies define specific assessments and tests for OM and SCM roles to measure individual attitudes and correlate them with the job position.
Findings
As a result of the work, a set of soft skills and abilities was defined that allow, through correlation analysis, to explain a large number of activities required to work in the operations and SCM (OSCM) environment.
Research limitations/implications
The work is inherently affected by the database used for the professional figures mapped and the scores that are attributed within O*NET to the analyzed elements.
Practical implications
The information resulting from this study can help companies develop specific assessments and tests for the roles of OM and SCM to measure individual attitudes and correlate them with the requirements of the job position. The study aims to address the need to identify soft skills in the human sphere and determine which of them have the most significant impact on the OM and SCM professions.
Originality/value
The originality of this study lies in its approach to identify the set of soft skills and abilities that determine success in the OM and SCM industries. The study used the O*NET database to correlate the tasks required for specific job roles with their corresponding soft skills and abilities. Furthermore, the study used ANOVA analysis to validate the findings in other sectors mapped by the same database. The identified soft skills and abilities can help companies develop specific assessments and tests for OM and SCM roles to measure individual attitudes and correlate them with the requirements of the job position. In addressing the necessity for enhanced clarity in the domain of human factor, this study contributes to identifying key success factors. Subsequent research can further investigate their practical application within companies to formulate targeted growth strategies and make appropriate resource selections for vacant positions.
Details