Search results

The study aims to determine an efficiency of external magnetic field on the bacteria surrounded by thousands of magnetic magnetite nanoparticles. The interstitial nanoliquid in which an artificial bacteria swims in biological cell is utilized with variable thermal conductivity. Two dimensions unsteady motion of second grade fluid are considered. The stretching wall is taken as a curved surface pattern.

The mathematical results have been obtained by Chebyshev pseudospectral method.

The impact of the various governing parameters is described by numerical tables and diagrams. It is proven that the pure blood velocity curves are higher when compared with the magnetite/blood. It is demonstrated from clinical disease that dangerous tumors show diminished blood flow. This study concludes that the blood velocity profile increases by increasing the values of fluid parameters. This implies that the medication conveyance therapy lessens the tumor volume and helps in annihilating malignancy cells. The blood temperature distribution raises as the magnetite nanoparticles concentration increases. Consequently, the physical properties of the blood can be enhanced by immersing the magnetite nanoparticles. Further, the present outcomes cleared the thermal conductivity as, a variable function of the temperature, has an important role to enhance the heat transfer rate.

To the best of authors’ knowledge, this study is reported for the first time.

The purpose of this paper is to analyze the influence of curvature on the transport of low-density lipoprotein (LDL) through a curved artery and concentration boundary layer characteristics numerically.

By using a projection method based on the second-order central difference discretization, the authors solve the set of governing equations, which consists of Navier–Stokes, continuity and species transport. The effects of initial straight length, as well as the curvature and wall shear stress (WSS) on LDL transport in a curved artery are established in this paper.

The obtained numerical results imply that the LDL concentration boundary layer thickness decreases in the outer part of the curved artery and increases in the inner part for both with or without initial straight length. The effect of Reynolds number on the concentration distribution in a curved artery with initial straight length is more pronounced than that on a fully curved artery, although an opposite trend was seen for the curvature ratio. The maximum surface LDL concentration is related to the regions with minimum WSS in the inner part of the curved artery, which has more potential the formation of atherosclerosis.

The authors present a comprehensive concentration distribution of LDL in the concentration boundary layer of the curved artery. The authors also characterize and predict the influence of curvature on the formation and development of atherosclerosis within the arterial wall.

The particle distribution in a fluid is mostly not homogeneous. The inhomogeneous dispersion of solid particles affects the velocity profile as well as the heat transfer of fluid. This study aims to highlight the effects of varying density of particles in a fluid. The fluid flows through a wavy curved passage under an applied magnetic field. Heat transfer is discussed with variable thermal conductivity.

The mathematical model of the problem consists of coupled differential equations, simplified using stream functions. The results of the time flow rate for fluid and solid granules have been derived numerically.

The fluid and dust particle velocity profiles are being presented graphically to analyze the effects of density of solid particles, magnetohydrodynamics, curvature and slip parameters. Heat transfer analysis is also performed for magnetic parameter, density of dust particles, variable thermal conductivity, slip parameter and curvature. As the number of particles in the fluid increases, heat conduction becomes slow through the fluid. Increase in temperature distribution is noticed as variable thermal conductivity parameter grows. The discussion of variable thermal conductivity is of great concern as many biological treatments and optimization of thermal energy storage system’s performance require precise measurement of a heat transfer fluid’s thermal conductivity.

This study of heat transfer with inhomogeneous distribution of the particles in a fluid has not yet been reported.

The lattice Boltzmann simulation of fluid flow in partial porous geometries with curved porous-fluid interfaces has not been investigated yet. It is mainly because of the lack of a method in the lattice Boltzmann framework to model the hydrodynamic compatibility conditions at curved porous-fluid interfaces, which is required for the two-domain approach. Therefore, the purpose of this study is to develop such a method.

This research extends the non-equilibrium extrapolation lattice Boltzmann method for satisfying no-slip conditions at curved solid boundaries, to model hydrodynamic compatibility conditions at curved porous-fluid interfaces.

The proposed method is tested against the results available from conventional numerical methods via the problem of fluid flow through and around a porous circular cylinder in crossflow. As such, streamlines, geometrical characteristics of recirculating wakes and drag coefficient are validated for different Reynolds (5 ≤ Re ≤ 40) and Darcy (10⁻⁵ ≤ Da ≤ 5 × 10⁻¹) numbers. It is also shown that without applying any compatibility conditions at the interface, the predicted flow structure is not satisfactory, even for a very fine mesh. This result highlights the importance of the two-domain approach for lattice Boltzmann simulation of the fluid flow in partial porous geometries with curved porous-fluid interfaces.

No research is found in the literature for applying the hydrodynamic compatibility conditions at curved porous-fluid interfaces in the lattice Boltzmann framework.

Gives introductory remarks about chapter 1 of this group of 31 papers, from ISEF 1999 Proceedings, in the methodologies for field analysis, in the electromagnetic community. Observes that computer package implementation theory contributes to clarification. Discusses the areas covered by some of the papers ‐ such as artificial intelligence using fuzzy logic. Includes applications such as permanent magnets and looks at eddy current problems. States the finite element method is currently the most popular method used for field computation. Closes by pointing out the amalgam of topics.

This study aims to investigate thermo-bioconvection of oxytactic microorganisms occurring in a nanofluid-saturated porous lid-driven cavity in the presence of the magnetic field. The heating is provided through a bell-shaped curved bottom wall heated isothermally. The effects of the peak height of the curved bottom wall, bioconvection Rayleigh number (Rb), Darcy number (Da), Hartmann number (Ha), Peclet number (Pe), Lewis number (Le) and Grashof number (Gr) on the flow structure, temperature and the iso-concentrations of oxygen and microorganisms are examined and explained systematically. The local and global, characteristics of heat transfer and oxygen concentration, are estimated through the Nusselt number (Nu) and Sherwood number (Sh), respectively.

The governing equations of continuity, momentum, energy and additionally consisting of species transport equations for oxygen concentration and population density of microorganisms, are discretized by the finite volume method. The evolved linearized algebraic equations are solved iteratively through the alternate direction implicit scheme and the tri-diagonal matrix algorithm. The computation domain has meshed in non-uniform staggered grids. The entire computations are carried out through an in-house developed code written in FORTRAN following the SIMPLE algorithm. The third-order upwind and second-order central difference schemes are used for handling the advection and diffusion terms, respectively. The convergence criterion for the iterative process of achieving the final solution is set as 10–8 and 10–10, respectively, for the maximum residuals and the mass defect.

The results show that the flow and temperature distribution along with the iso-concentrations of oxygen and microorganisms are markedly affected by the curvature of the bottom wall. A secondary circulation is developed in the cavity that changes the flow physics significantly. The Nu increases with the peak height of the curved bottom wall and Da; however, it decreases with Ha and Rb. The Sh increases with Da but decreases with Ha and the peak height of the curved wall.

A similar study of bioconvection could be extended further considering thermal radiation, chemical attraction, gravity, light, etc.

The outcomes of this investigation could be used in diverse fields of multi-physical applications such as in food industries, chemical processing equipment, fuel cell technology and enhanced oil recovery.

The insights of bioconvection of oxytactic microorganisms using a curved bottom surface along with other physical issues such as nanofluid, porous substance and magnetic field are addressed systematically and thoroughly.

This paper aims to achieve rapid design and manufacturing of personalized total knee femoral component.

On the basis of a patient’s bone model, a matching personalized knee femoral component was rapidly designed with the help of computer-aided design method, then manufactured directly and rapidly by selective laser melting (SLM). Considered SLM as manufacturing technology, CoCrMo-alloyed powder that meets ASTM F75 standard is made of femoral component under optimal processing parameters. The feasibility of SLM forming through conducting experimental test of mechanical properties, surface roughness, biological corrosion resistance was analyzed.

The result showed that the tensile strength, yield strength, hardness and biological corrosion resistance of CoCrMo-alloyed personalized femoral component fulfill knee joint prosthesis standard through post-processing.

Traditional standardized prosthesis implantation manufacturing approach was changed by computer-aided design and personalized SLM direct manufacturing, and provided a new way for personalized implanted prosthesis to response manufacturing rapidly.

The purpose of this study is to determine the impact of two-phase power law nanofluid on a curved arterial blood flow under the presence of ovelapped stenosis. Over the past couple of decades, the percentage of deaths associated with blood vessel diseases has risen sharply to nearly one third of all fatalities. For vascular disease to be stopped in its tracks, it is essential to understand the vascular geometry and blood flow within the artery. In recent scenarios, because of higher thermal properties and the ability to move across stenosis and tumor cells, nanoparticles are becoming a more common and effective approach in treating cardiovascular diseases and cancer cells.

The present mathematical study investigates the blood flow behavior in the overlapped stenosed curved artery with cylinder shape catheter. The induced magnetic field and entropy generation for blood flow in the presence of a heat source, magnetic field and nanoparticle (Fe₃O₄) have been analyzed numerically. Blood is considered in artery as two-phases: core and plasma region. Power-law fluid has been considered for core region fluid, whereas Newtonian fluid is considered in the plasma region. Strongly implicit Stone’s method has been considered to solve the system of nonlinear partial differential equations (PDE’s) with 10–6 tolerance error.

The influence of various parameters has been discussed graphically. This study concludes that arterial curvature increases the probability of atherosclerosis deposition, while using an external heating source flow temperature and entropy production. In addition, if the thermal treatment procedure is carried out inside a magnetic field, it will aid in controlling blood flow velocity.

The findings of this computational analysis hold great significance for clinical researchers and biologists, as they offer the ability to anticipate the occurrence of endothelial cell injury and plaque accumulation in curved arteries with specific wall shear stress patterns. Consequently, these insights may contribute to the potential alleviation of the severity of these illnesses. Furthermore, the application of nanoparticles and external heat sources in the discipline of blood circulation has potential in the medically healing of illness conditions such as stenosis, cancer cells and muscular discomfort through the usage of beneficial effects.

This bibliography is offered as a practical guide to published papers, conference proceedings papers and theses/dissertations on the finite element (FE) and boundary element (BE) applications in different fields of biomechanics between 1976 and 1991. The aim of this paper is to help the users of FE and BE techniques to get better value from a large collection of papers on the subjects. Categories in biomechanics included in this survey are: orthopaedic mechanics, dental mechanics, cardiovascular mechanics, soft tissue mechanics, biological flow, impact injury, and other fields of applications. More than 900 references are listed.

This paper aims to describe a recently proposed algorithm in terrain‐based cooperative UAV mapping of the unknown complex obstacle in a stationary environment where the complex obstacles are represented as curved in nature. It also aims to use an extended Kalman filter (EKF) to estimate the fused position of the UAVs and to apply the 2‐D splinegon technique to build the map of the complex shaped obstacles. The path of the UAVs are dictated by the Dubins path planning algorithm. The focus is to achieve a guaranteed performance of sensor based mapping of the uncertain environments using multiple UAVs.

An extended Kalman filter is used to estimate the position of the UAVs, and the 2‐D splinegon technique is used to build the map of the complex obstacle where the path of the UAVs are dictated by the Dubins path planning algorithm.

The guaranteed performance is quantified by explicit bounds of the position estimate of the multiple UAVs for mapping of the complex obstacles using 2‐D splinegon technique. This is a newly proposed algorithm, the most efficient and a robust way in terrain based mapping of the complex obstacles. The proposed method can provide mathematically provable and performance guarantees that are achievable in practice.

The paper describes the main contribution in mapping the complex shaped curvilinear objects using the 2‐D splinegon technique. This is a new approach where the fused EKF estimated positions are used with the limited number of sensors' measurements in building the map of the complex obstacles.